Why does HBO Go need to buffer during streaming with a wired connection?

I have Verizon FiOS with 75/35 Mbps speed. When streaming HBO Go with a wired connection programming is intermittently interrupted for buffering; Apple TV is connected to an LG flat screen through a Yamaha receiver via HDMI cabling. I had this issue while streaming wirelessly despite full 5 bar signal strength to Apple TV from the FiOS router.
Any thoughts? Software is up to date.

mpk7
Try rebooting your router.

Similar Messages

  • TS4268 why does it say "an error occurred during activation. Try again." and when I try again it says the same thing?

    Why does the message "an error occurred during activation. try again." keep coming up. I have tried to log in with a different Apple ID and when I pick the e-mail that I would like to receive messages, it sends and allert that states, "unable to verify email because it is already in use."
    How do I log back in?

    See if this previous discussion helps.
    Can't Activate FaceTime

  • Why does Sun Studio need NetBeans?

    Hi!
    Why does Sun Studio need a NetBeans installation for running successfully? If I am not too wrong, I believe Sun Studio has the same relation to the NetBeans project as Star Office has to OpenOffice.org?
    Now, coming to the solution. I am using Sun Studio 12 on Solaris:
    amit@opensolaris:~$ sunstudio --netbeanshome /export/home/amit/netbeans-6.5beta/bin/
    Validating NetBeans IDE at: "/export/home/amit/netbeans-6.5beta/bin/"
    Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
    Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
    installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
    1) Location specified with --netbeanshome command line option
    2) At /opt/netbeans-5.5.1 location, if exists
    3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
    4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
    Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
    As is apparent, I have a NetBeans 6.5 Beta build.
    What is the solution?
    Thanks,
    Amit

    The realtionship from SunStudio to NetBEans is more than a line from A to B.
    Ideally SunStudio releases would track NetBeans releases.
    However, NetBeans evolves at a rather fast pace. At the same time SunStudio
    also contains compilers which have their own products to coordinate with ...
    OS releases, new SPARC chips and Sun system releases.
    These releases never coincide so SunStudio tends to lag in it's dependencies
    on NetBeans and as a result ships with it's own copy.
    We used to actually build our own, sometimes tweaked, NetBeans for SunStudio.
    Weve made some progress in that we just pick released NetBeans bits and re-ship them.
    We're working on the ability for SunStudio to use NetBeanses which are already
    installed.
    To make older SunStudios use newer NetBeans is a tougher proposition but
    we're dedicating grey cells to that matter as well.
    If you really want a NB 6.5 based SunStudio wait a bit. We'll be releasing
    SunStudio SX based on NB 6.5 shortly.

  • Why does RMI client needs to specify codebase

    Anyone,
    I'm trying out a dynamic class loading tutorial.
    my question is why does the client need to define
    java.rmi.server.codebase.
    I can understand why the server needs it, as it is downloading classes
    it does not have information about. But why does the client need to specify the codebase

    The client has to annotate the codebase property if it is calling remote methods with parameters, whose subtypes are not defined in the server. This way server has a change to dynamically locate and load those classes from specified codebase.

  • Why does my iphone need wifi to update

    Why does my iphone need wifi to download and install new software update!?
    While other iphones can do that with their cellular internet

    This is your phone's operating temp range:
    Operating ambient temperature: 32° to 95° F (0° to 35° C)
    You exceed that range & you'll get that warning...you do nothing, & your phone will shut down to prevent damage. Easy to exceed that range while your phone is navigating & exposed to sun or another heat source.
    It is what it is.

  • Why does ipad 2 need a sim card?

    Why does ipad 2 need a sim card? it doesn't have a phone function.

    Andreas - Gothenburg wrote:
    Why does ipad 2 need a sim card? it doesn't have a phone function.
    If you want to use the 3G cellular data service - you need a sim card. If you just plan on using WiFi, then it doesn't matter.
    The 3G cellular service allows you to connect the iPad to the internet in areas where WiFi is not available. You do not have to install the sim card in order to use the iPad as long as you just use WiFi. You can always purchase the service later if you don't want it right now.

  • Help !!! why does the client need to specify codebase

    Anyone,
    I'm trying out a dynamic class loading tutorial.
    my question is why does the client need to define
    java.rmi.server.codebase.
    I can understand why the server needs it, as it is downloading classes
    it does not have information about. But why does the client need to specify the codebase

    Lets say you have a Remote interface with a method:
    void compute(Task task);
    Now, the clients of this remote interface want supply
    a zillion of custom tasks to be executed on the
    server, but how the hell the server knows where to get
    the actual classes for those tasks?You fool. its for the server to hand the client the reference to a stub, or to specify FOR the client where the stubs are, so that the CLIENT can get a reference to them, to make the call.
    This is where the
    client codebase comes to the scene. Client codebase......you mean codebase info that is sent TO the client, so it can find the classes.
    A client annotates
    it and it gets written to the manifest part of any
    serializable object (Task implentation) being passed
    over then net so the server could find and download
    the actual class of the object.
    Rubbish.
    I hope I made myself clear. as mud.
    You might want to check
    out this link also:
    http://java.sun.com/products/jdk/1.2/docs/guide/rmi/cod
    base.htmlI read this and i still dont see anything about CLIENT codebase. I see stuff about codebase, and the server trying to make the client aware of where it can get the relevant classes.
    What a fool you are. Dont bother replying. I have had enough of your autocratic rubbish.
    >

  • Why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it?  I haven't synched it with any other mac but my own.

    why does it tell me my ipad is synched with another itunes library and wants to erase the thing when I want to synch it?  I haven't synched it with any other mac but my own.

    Hi Lisa,
    I know from experience that this must be a frustrating situation for you especially if you don't want to loose the music/video content that is currently on your ipod. Unfortunately though you may have to consider re-syncing it as it thinks its currently synced with another computer.
    If you bought any music that is on the ipod through itunes you can opt to right click the ipod in itunes and 'transfer purchases' if you authorise your library in the 'Store' menu in itunes. Some reasons for this happening may include some of the following:
    Deleting and reinstalling your itunes on the computer.
    Removing the account you had on the computer you used itunes in and making a new one. (User account, eg: Lisa).
    Changing computers in the past.
    A friend or family member syncing it on their computer to give you there music.
    A sign of a failing iPod.
    Alternatively you can opt to not sync it and keep the music that is on your ipod there but this means you will never be able to update your ipod.
    Hope this helps!

  • Why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • Why does the Java method ServletContext.getResourceAsStream return null with a know good path to an xsl file?

    iPLANET ISSUE
    Why does the Java method ServletContext.getResourceAsStream return null with a know good path to an xsl file?
    CODE
    ServletContext context = mpiCfg.getServletConfig().getServletContext();
    // Debugging
    out.print(context.getServerInfo());     // Get server info
    out.print(“getRealPath = ” + context.getRealPath("WEB-INF/xsl/RedirectToAcs.xsl"));
    String strXslName = "RedirectToAcs.xsl";
    InputStream is = context.getResourceAsStream("WEB-INF/xsl/"+ strXslName);
    TRACE FROM THE LOG
    [26/Jul/2002:08:23:15] info ( 2868): [0][][ClearCommerceCcpaMpi][]getServerInfo() = iPlanet-WebServer-Enterprise/6.0, getRealPath() = C:\iPlanet\Servers\web-apps\ccpa\WEB-INF\xsl\RedirectToAcs.xsl
    [26/Jul/2002:08:23:15] info ( 2868): [0][][ClearCommerceCcpaMpi][]strXslName = RedirectToAcs.xsl, is = null
    [26/Jul/2002:08:23:15] info ( 2868): [1][][ClearCommerceCcpaMpi][16]ResourceAsStream is null
    [26/Jul/2002:08:23:15] info ( 2868): [1][][ClearCommerceCcpaMpi][30]Problem reading XSL file.
    DIRECTORY DUMP
    C:\iPlanet\Servers\web-apps\ccpa\WEB-INF\xsl>dir
    Volume in drive C has no label.
    Volume Serial Number is 9457-EBF4
    Directory of C:\iPlanet\Servers\web-apps\ccpa\WEB-INF\xsl
    07/22/2002 05:54p <DIR> .
    07/22/2002 05:54p <DIR> ..
    07/22/2002 05:54p 3,086 RedirectToAcs.xsl
    07/22/2002 05:54p 3,088 Response.xsl
    2 File(s) 6,174 bytes
    2 Dir(s) 1,797,405,696 bytes free

    I think there's supposed to be a forward slash before WEB-INF.
    InputStream is = context.getResourceAsStream("/WEB-INF/xsl/"+ strXslName);

  • Why does iPhoto shuts down when I select Info with an image selected.

    Why does iPhoto shut down when I select Info with an image selected.

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • Why does LabVIEW allow me to have 2 controls with same name

    Here's a general LabVIEW question:
    Why does LabVIEW allow me to have 2 controls with the same name in the same VI?  It seems like this only increases the chances of confusion.  Especially when someone is just looking at a block diagram (or documentation of a block diagram).
    No other programming language that I know of allows this.  I realize that uniqueness of name is not as critical in LabVIEW as it is in any text based language.  For example, in a text based language, if I had 2 variables called abc and I wrote a statement
    abc = 12;
    the compiler would not know which abc was being referred to.  In LabVIEW, if we had 2 controls called abc, the equivalent of doing an abc=12 is writing to a local variable (which is always linked to one of the controls) and there is no ambiguity.  Still, someone looking at the code cannot figure out which abc is linked to unless he does a right click>>Find>>terminal (or a double click).
    Even though I have never and never will name 2 controls the same, I think it would be a nice constraint to see enforced by LabVIEW.
    Any input from NI engineers on this?
    Message Edited by S G on 12-18-2007 03:38 PM
    S G
    Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
    Attachments:
    Trial1.JPG ‏21 KB

    I know when you copy and paste a control or indicator, LabVIEW automatically increments the label. But since you can hide the label, and show or hide the caption, there must be another mechanism that LabVIEW uses to keep track of all the controls. I thought I remember back in the "old days" (ver 6 or 6i) LabVIEW would give you an error if you tried to make two controls with the same name. Perhaps that was LabWindows/CVI.
    I don't know where the index is actually stored, but if you look at a property node linked to the Pane, you will see an array of references to the controls and indicators. Since the references are stored in an array, I assume that any local variables are tied to the index of that array. Since the labels themselves are properties of the control, I guess there's no reason to limit what that label is. They all have a unique index number.
    Interestingly, this array of references grows from the beginning. That is, any new control or indicator is put at index 0, not the end of the array.
    B-)
    Message Edited by LabViewGuruWannabe on 12-18-2007 08:45 PM
    Attachments:
    Labels.png ‏12 KB

  • Why does some video need to be rendered in FCE 4 before I can work on it?

    I've been trying to get a handle on FCE 4 because it's very different than iMovie '08. I have a bunch of content in iMovie that I'd like to mess with in FCE 4, so I exported from iMovie as FCE XML and imported in FCE. There is some video that I re-encoded to Quicktime from ASF and it seems to need to be rendered before it will show up in the Canvas in FCE 4. FCE shows this content as DV/DVCPRO - NTSC under "Compressor" in the browser. Other stuff that was taken off my Sony HDR-SR7 is available in FCE 4 without any problems. This shows up as Apple Intermediate Coded in the browser.
    What's the deal with rendering anyway? Why does FCE need to "render" video to add things like effects when iMovie can add effects, etc at will with no "rendering" required?

    FCE can do certain effects on the fly without rendering. Some more elaborate transitions, like 3D wipes, require too much processor time to do them in real time. My understanding is that Macs with greater on-board processing power do more of these effects in real time, while slower machines must render.
    iMovie can do these effects on the fly because it's working with far less information. Think of iMovie works in the DV format while FCE works in the DV/DVCPRO-NTSC format. It's too subtle a name difference but the reality is quite different. It's like editing still pictures in compressed, lossy JPEG format vs. uncompressed TIFF format. Think about how long it takes your computer to open a photo of say, 8x10" 300 dpi in TIFF vs. that same file in JPEG. Well, that's what FCE has to do. It's working in the video equivalent of TIFF -- 30 frames per second. So there's a greater demand on your processor by a factor of 10. You can see this in action in Quicktime. Save a raw video import 720x480 in .dv and then in DV/DVCPRO-NTSC format and then play it back. The .dv will probably play smoothly while the DV/DVCPRO-NTSC (.mov) will hang up on play-back. It's just too much for your process to display all of those full resolution images so rapidly. And if you look at the two images side-by-side (particularly titles) you'll see how sharp and clear the .mov file is compared to the compressed .dv file.
    Hope this helps.

  • Why does my Ipod keep freezing up during playback,

    Why does my Ipod 3 keep freezing up? I have reset it as discribed in the online help 4 different times and it still freezes.
    I at first thought it was due to the song was an MP3 but it has since froze on ACC and CDA audio. This would tell me it isn't the format that is causing it to freeze.

    By a reset do you mean an actual hard reset of the device or a restore of it in iTunes?  If it was the former, try a restore of the device in iTunes.  If it was the latter, your iPod likely needs servicing. 
    B-rock

  • Why does Livecycle Designer need to lock scripting on objects with children that are fragments??

    Can someone tell me why Livecycle need to lock scripting on objects with children that are fragments??
    I mean, just because I have a fragment (which you can't edit the script for), why does Livecycle need me to NOT edit say the initialise event on the Main form.
    Yes, I can remove my fragments, edit and reinsert.  Also if the event already has a script, I can edit the xml.  But neither of these are terribly convenient.
    Couldn't there be a better way?

    The purpose of the fragment is to create re-usable or standard components. In most cases the fragment is not created by the same person designing the form and they do not want the from designer to modify any part of the fragment (it is a separate XDP file). There may be code in that fragment that relies on the structure that exists. If you have the rights you can always edit the fragment and when your PDF is created the changes will be picked up.
    If you want to be able to modify the fragment while it is in Design mode sounds to me like you want to add a component to the object library. This will allow you to have a reusable piece of a form that you can modify on a form by form basis. To do this simply build the piece that you want. Lasso the entire form and drag it onto the Custom library. When you release it a dialog will pop up allowing you to name your component. Now on any form design you can drag your new component onto the canvas and all methods/properties and code will come with that component (allowing you to modify it for that form as you see fit).
    Note that you can create your own libraries to hold your components if you see fit. Also if you put your libraries on a shared drive, you can share components between Designers.
    Paul

Maybe you are looking for