Why does I'm IPad say fully charged when its not its 92% should I get it looked at by a professional ?

My IPad is at 92% and I plug it in and it says fully charged but its not. Should I get it looked at ?

The battery meter is really just an estimate
However, you can calibrate it
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/

Similar Messages

  • Why does my iPod go from fully charged to charging while plugged in?

    Ok I reseted the setting it's still is draining when not plugged in :( my question is why is it going
    From fully charged to charging while its plugged in? Am I not
    Suppose to use it while its charging? I wish apple would hurry fix this by upgrading
    The 6.1.3 to 7 for iPod g 4. Is anyone else having a battery problem?

    The iPod always runs off the battery, not from outside power.  So if you are using your iPod, you are draining the battery.  If your iPod is connected to a charging source at the same time you are using it, after the battery has drained a bit from usage, the iPod will start charging the battery. This is perfectly normal.

  • Is a new iPad 2 fully charged when you take it out of the box?

    hi, do Ipad 2 come charged and ready to be tested? my friend will be testing for me, but he has not used ipad before and neither have i. does the ipad need to be fully charged, then set up first before testing it?

    Mine came with 87% charge, but they must be activated using an itunes account (and a computer) before you can use them. If you get it from an Apple Store, they can activate it for you.
    Glor

  • Why does my Vizio hdtv say no signal when I connect my minidisplay port to hdmi cord between my macbook pro and tv?

    My Vizio hdtv says "No Signal" when I use my mini displayport to hdmi cord. It worked flawlessly for a month but randomly decided to no longer work.
    I am using a macbook pro from early 2011 running os x Lion 10.7.5 and a thunderbolt to hdmi cord. The cord has worked without a hitch the numerous times I've used it until recently. Now plugging it in will cause the macbook to flash blue quicker than normal and immediately go back to the normal screen. I know the macbook recognizes the TV because changing the input on the TV to the hdmi connected to the computer will cause the macbook to flash blue again, with the same result. The TV remains unresponsive. I have tried all combinations of turning on and off the TV and macbook with the cord plugged in and unpugged from either and both systems and in both hdmi inputs on the TV. I've changed the display resolution to every possible option with no result. The TV is not recognized as a display on either the Display section of System Preferences or the Sound section.
    It confounds me that the cord should work flawlessly until now, a month after buying it, for no apparent reason. I've been gentle with the cord, so the problem being a result of damage is unlikely. I had not updated my computer in any way between the successful and unsuccessful uses of the cord, but I have since updated my computer and the problem remains.
    I have searched for this problem on the Internet and have seen others with similar problems, but I have not found a solution that resolves my problem. I hope to avoid having to make any additional purchases.
    And a thousand and one thanks to any and all who help.

    Do you have gfxCardStatus installed?  Is your monitor set to "Integrated" or "Discrete".  You want it set to Discrete to drive the external HDMI display.
    Try resetting the PRAM and SMC
    <About NVRAM and PRAM>
    <Intel-based Macs: Resetting the System Management Controller (SMC)>
    Are you sure you have a good miniDisplayPort to HDMI cable?
    Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
    Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input.

  • Why does my touch do completely random things when im not even touching it?

    I just got a new 2nd gen 16gb ipod touch that is really bugging me. It doesn't respond to what i tell it to do and does random things when im not even using it. Like if i set it down on my desk and just look at it without touching it, it might randomly go to the stock page, or go to contacts and start typing in gibberish, or go to settings, etc. It just does things and only sometimes responds to my touch...do i have a defective touch??

    Telekenesis?
    Seriously, though, with spurious input like this and incorrect input when you do touch the screen, it sounds as if the screen may have a problem. I presume you have no protective covering on the screen?
    It sounds as if the input may actually be delayed for far longer than it should. Is there any recent app install that may affect this? Have you tried the obvious restart, reset processes? If so, and this is still incorrect, off to the shop with it.

  • Why does my mac restart after fully charging?

    I'm new to my mac and I'm a little confused over why it acts in a certain way.
    So I close it and put it to charge every night. In the morning when I wake up, I unplug it and it makes a strange mechanical noise and restarts. I type in my password, then some loading bars appear, then have to type my password in again and from then on it works normally... But I would like to know how to avoid the restarting process. Am I doing something wrong? Or is there a problem with the battery?
    I'm new to macs all together, so what might seem like an obvious solution to you, may not be so clear to me!
    Grateful for any advice.

    Hi Maki
    When you open the laptop does it do a full restart? As in it goes black, plays the iconic apple startup chime, displays a splash screen and loading bar, and then prompts you for log in?
    A full restart after waking is suspicious. Typically when removing power from the macbook, it will make a few noises as the optical drive cycles up, or the hard drive spins. It should then either load your desktop or bring up the log in page where you are to type in your password. Occasionally if the macbook has been asleep for a very long time it might write an image to disk and load from there. This would show when you open your macbook, and it seems unresponsive for a moment as it loads from the file then prompts you to log in. It's a rather lengthy process when it does this. I know for my mid 2012 macbook pro that was the case. I replaced the hard drive with an SSD but mainly I changed my hibernate mode to never write a disk to file, and never load from it. It drove me bonkers having to wait every time I opened the thing.

  • Why does my screen saver say "no photos" when they are definately there?

    I just downloaded the latest OS update and my screen saver no longer works.  When i go into system preferences and set up the folder to use for the picture slide show--it gives me an error that there are "no photos". But I have triple-checked and the photos are in fact there.  Why doesnt screen saver see them??

    UPDATE:  I spoke with Apple and there is NO fix.  I've set up my photos in a hierarchy as follows
    Pictures FolderSlide Show Pictures Folder
    Sub folder jpegs
    Sub folder with jpegs
    sub-folder with jpegs
    Everytime i have a new batch of photos worthy of the slide show--i add a new sub-folder.  This worked perfectly fine with the old OS but does not work with Mountain Lion.  According to the Apple support tech i spoke with, Mountain Lion does not support going into that level of sub-folder.  Essentially it is seeing the "Slide Show Pictures folder" but all it sees are the next level of sub-fodlers themselves--it cant go into the next level to see the actual photos.  Sounds pretty stupid if you ask me

  • Why does my iTunes keep saying that my songs are not found?  They have been on there for a very long time but now can't be put on my devices.

    So I bought some new music on my iPhone.  I put it on the computer so I could update my kids' iPods and while doing this I got a box that said it couldn't find some of my music.  Then it took it off of the iPod and Phone.  I also can't use some of the ringtones I bought.  I don't understand.  Now the things it can't find has a little exclamation mark by them.
    I need help, I don't understand!!!!!

    I posted this about two years ago so can't quite remember how I solved it.
    I've got a feeling I had to completely erase my iPhone (losing a load of notes and music playlists !) in order to fix this problem. It was a bit of a hassle if I can remember also.
    Sorry.

  • Why does the App Store say Session Declined when I try to add my card?

    At first it was declining all of my debit cards when I was trying to purchase a FREE app from the store, it would not take a single card that I had. Now it keeps saying, "Session has timed out," when I go to add my new one.

    Thank you for replying to my question. I have already contacted customer support about it. They say I owe a certain amount of money, I am not sure for what. But, I asked them. Thank you!

  • HT4528 Why does my text message say my emal address n not my mame

    My text messages that r sent have my email address n not my name all of a sudden

    Check Settings>Messages>Receive At>Caller ID, set to your phone number instead of your email address.

  • Why does my apple tv use data even when im not downloading..??? even when its idle it uses data???

    why doe smy apple tv use data when idle?

    If it's not accessing any internet content it shouldn't be. I would look into your security settings and contact ISP

  • Why does my right mouse button automattically paste when clicked? The option should be there, it should not paste whatever has been coppied without me clicking

    If I copy something and then put the pointer on a location where pasting is possible (navigation bar for instance) the right mouse just pastes whatever is in there without my clicking on paste. Very annoying and I will quit using the browser if it does is stop. Here is an example. I will misspell the next word and then right click on it to correct and you can see what happens. It will paste whatever I have copied previously and not fix the error. Speling It is also possible to copy text by double-clicking it and holding down the mouse button until the
    That is it. All the text after Speling is pasted when I tried to correct. Same thing if I high lighted text and tried to right click to copy....just more pasting of the same thing. Help please.

    Another user reported that this is a feature of the FastestFox add-on. Can you check its Options or, if necessary, Disable it and see whether that is the cause in your case?
    orange Firefox button (or Tools menu) > Add-ons > Extensions category

  • Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Why does my Airport Express say "self assigned IP address"?  No IP address for the ethernet, and it is not connecting to my cable router any longer...

    Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
    So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

  • Why does my cellphone keep saying that estimating time remaining when I try to upgrade the system?

    Why does my cellphone keep saying that "estimating time remaining" when I try to upgrade the system?
    Is there anyway to fix this situation?

    Hi Eric_Sun,
    Thanks for visiting Apple Support Communities.
    You may want to update your iPhone using iTunes on a computer if your device only shows "estimating time remaining" when you try to update wirelessly:
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update.
    Click Download and Update.
    If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
    You can find these steps here:
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    If you are still not able to update, I recommend the steps in this article next:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Best Regards,
    Jeremy

  • HT4623 Hi why does my itunes always say "error contacting server" when i update my iPhone 5 with the iOs 6.1.3 update

    Hi why does my itunes always say "error contacting server" when i update my iPhone 5 (iOs 6.0.2) with the iOs 6.1.3 update?

    Hey Tigergirl17,
    Thanks for the question. If you haven't already done so, you may want to update iTunes to v11.1 (released on Sept 18th). After updating iTunes, you can then update your iPhone 5 to iOS 7.
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Thanks,
    Matt M.

Maybe you are looking for

  • Report on production orders

    Guys, I describe the problem with example. Header material X. It has sub components Y1(phantom). Y1 has Y2(phantom) below it. Y2 has Y3(Phantom) below it. Y3 has A(inhouse production) and B(External procurement). When Material X is order in sales ord

  • Help - Finding images that I've edited

    Hi again, This is a contination of a prior post, but has narrowed in scope.  I have a case open with Adobe realted to my catalog going haywire at some point in the past (longer ago than my oldest catalog BU). In my dealings with Adobe on this now alm

  • What's the secret handshake?, Mobile Forms, LC ES2

    So I have this http://www.adobe.com/products/acrobat/readerforppc.html and the picture shows a form being displayed and would seem to indicate I could send it a form specifically designed for mobile. The question is.... How do I create a form in LC E

  • Retina display 2013 - UC Berkeley

    I bought my laptop from my university (UC Berkeley) and I set it up so that it would encrypt my data using the security settings on apple. It's the new 2013 Retina display. It says that I need to restart my laptop and I'm trying to. But, as my laptop

  • Applications suddenly quit - nothing helps...

    I began noticing yesterday that my iPad wasn't performing properly.  Several of my most commonly used apps started quiting suddenly.  I went through the normal steps - in some cases many times.  1 - Restart, 2 - Reset, 3 - Restore.  I then went to th