Why does iDVD '11 make my footage look darker?

I'm in the last stages of making a video for a high school play. The video looks and sounds good in its format (Quicktime Large 540p, 960x540, H.264 codec), but when I preview it in iDVD '11 the footage has gotten darker. Why is this? Will it remain this dark when I burn it to DVD? Will the brightness vary on what the DVD will be viewed on? Is there anything I can do to fix this if re-editing isn't an option for me at this point? I'd appreciate any input.

Hi Klaus1
Strange link - I don't see the right page !
my thoughts about going from FCE/P to iDVD
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Similar Messages

HT1338 Why does mountain lion make my computer run slow and my Safari too?

why does Mountain Lion make my computer run slow and my Safari too? Please help!

The problem is probably not mountain lion. It works just fine on my computer. And a few million others.
If your computer is having problems, you can try to fix it with some simple troubleshooting maneuvers.
Take a look at:
Mac OS X BASIC TROUBLESHOOTING & MAINTENANCE Tips Mountain Lion 10.8 Lion 10.7 Snow Leopard 10.6 10.5 Tiger 10.4 Why How To Tutorials

Why does iDVD store stuff "all over the place"? Project now broken

Hi all,
did an hour long family movie project, and in the meantime cleaned up my documents folder and deleted some stuff that I thought was internet downloads etc, or extra working files.
Turns out it was the important audio stuff for iDVD!
I've broken my project... the stuff was obviously important, and now when I open this project it has a big broken chain on it.
Why does iDVD store important stuff "all over the place" like that? I mean, it's confusing enough (for newbies) to learn where the events and where the projects are stored, but why does it strip off the sound and store them in documents where ANYTHING could get deleted?

Just to add, an iDVD project should be thought of as a shell, an empty container. It has references to the media files used in it, but does not actually contain these files. The files remain in their normal locations. When you burn to disk, or create a disk image file, iDVD pulls these files just for encoding onto a DVD disk or into a disk image file. It does not really move these files into its project files. Your iMovies, photos and audio files remain where they are. If you move, change, rename or delete any of these files, iDVD will not be able to locate them, and you will see the broken link images.
For this and several other reasons, it is a good idea to leave everything alone and not go deleting any files until you have finished your iDVD project.
Then, when you are ready to burn it to DVD disk, be sure to do a 'Save as disk image' to create a disk image file of the project. This process looks like the burn process, and the encoding will take just as long, but the end result is a self-contained disk image file, not a burned DVD disk.
The advantage of the disk image file is that you will have an exact copy of your iDVD project with all the media files encoded into it. You now can safely delete all the media used in this iDVD project without losing the project. Now you can clean up your documents folder! Deleting all the files used in the project will also save you drive space.
You can save disk image files as backups and can move them to external drives or other computers. You can burn DVD disks from disk image files using Disk Utility or Toast. You don't have to worry about your burned DVD disk breaking/melting or having something spilled on it (kids in the house!). You can always get the disk image file and burn another copy. (Great for the relatives who somehow 'lose' the great DVD you made for them!).
You cannot edit the disk image files however, so you should be creating one only when your project is completely finished.
If you wish to save all your iDVD files while you are working on a project, you can archive your iDVD project. I have not found the need to do this, but the link J Keller gave you for the tutorial explains how to save as archive and as disk image. Obviously, the archive project will be larger since it is saving all the media. Archived projects can also be moved to other drives or computers.
Hope you can recreate your project.
Note to J Keller: the video tutorial was quick and gave the brief how-to and why. Nothing complicated.

Why does the Photoshop CS6 Application window look grainy on a 15" MacBook Pro Retina?

Why does the Photoshop CS6 Application window look grainy on a 15" MacBook Pro Retina?

Hi. Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum.

Why does the iPad make the same noise when it connects to a charger that doesn't charge it as one that will charge it???

Why does the iPad make the same noise when it connects to a charger that doesn't charge it as one that will charge it???
I would expect that it would make an unusual noise if plugged into a generic USB charger that does not have enough oomph to charge a pad to alert you - otherwise, you might think the noise is reassuring that you are actually charging it.

I guess my question was actually more of a comment on the (lack of) design! It is unusual that something like this would still be in an Apple product. There are wall chargers that have a USB port on them that do not have the required oomph to charge the iPad. I have one that has two USB ports, one for my iPhone (it won't charge an iPad), and one for an iPad with greater amperage rating. I accidentally used the wrong ones for a while yesterday, but noticed before being "surprised" the next morning by an uncharged iPad. The iPad is smart enough to say "Not charging" by the battery icon when it is plugges in to one of these, so it "knows" - seems like it would be fairly simply to have the iPad make a different or additional noise wehn it puts up the "Not charging" text icon. Failsafe user experience?

HT5930 Why does my Aperture v3.5.i look different from the one shown in the online videos

Why does my Aperture v3.5.i look different from the one shown in the online videos

Are you asking about the colorful icons in the video?
The video must have been done with an Aperture version 3.2.4 or earlier. Since Aperture 3.3 are the icons drab and gray - the Aperture 3.3 Release Notes are calling this:
Newly designed monochrome source list and toolbar icons.
The Release notes will tell you, what has changed since then:
http://support.apple.com/kb/TS2518
--Léonie

Why does idvd doesn't appear con my finder o computer?

I can't make a dvd because I don't have IDVD in my computer I don't know why?

Apple insists that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced.
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that.

Why does running PDF Maker or Save As PDF cause MS Word 2013 to fail?

When I run PDF Maker or Save As .pdf in MS Word 2013, the Word program quits - why?forumnotifier
forumnotifierWhy does PDF Maker not work with MS Word 2013?
Why does PDF Maker cause Word 2013 to fail?Newsgroup_User

BizGuru,
Somethings to consider.
--| In Windows - the OS needs a goodly space for 'elbow room' - you don't want to have HDD free space drop below something like 15%.
Say your HDD is 600GB, 60GB free space is leaving you 10%...
-| RAM - May not be enough; more is better <g>.
--| Virtual Memory - if in Windows, open up Task Manager. Look at all the "stuff" there. Most is not required by the OS.
Most of the listing is "stuff" associated with a full cart of processes associated with things you may not need or use but they suck up resources.
--| Graphics - Processing images into PDF can be resource intensive. Having a dedicated graphics card with enough ram makes a difference.
Be well...

Why does iDVD revert to the template at the end?

Hi Guys,
Hope you all had a wonderful Easter break!
I'm trying to produce a workflow for a project I'm currently working on in both iMovie & iDVD.
My problem is:
Once I've chosen the "Share" option in iMovie and iDVD opens, I;m going to need to burn the footage onto DVD without the use of a template! So I choose the map view, drag the footage across to the first window & test it (as it tells you to do in the map window)!
That's OK too . . . .. but why oh why, when the DVD finishes, does iDVD revert back to the template (Usually the Revolution Theme)?
I need to DVD to loop back to the start of the footage at the very least (would be better to simply stop at the end of the DVD) . . . how do I do this?
Thanks for any help you guys can give!
Have a great day!

st3v1e wrote:
.. Have you tried customising the templates, by the way?
sure, the drag'n drop feature of iDVD I frequently use for changing the backgrounds of templates, even adding a 'moving' background to my DVDs...
added a while ago to my site these advices.. :
http://karsten.schluter.googlepages.com/idvdpic-in-mov-background
http://karsten.schluter.googlepages.com/nothemedvd
http://karsten.schluter.googlepages.com/modifyingidvd
what I'm NOT doing, is creating my own templates..
http://www.creativemac.com/2003/03_mar/tutorials/idvd31030319.htm (+following pgs)
http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=29770-0 (+following pgs)
.. there's no need for me, to create my own dropzones, using Motion etc. . modifying existing iDVD templates offer me enough 'options' ...

Why does Photo Booth make my camera echo every time I'm video chatting?

When I am Video Chatting with other people, my camera all of a sudden starts acting weird and echoy. Meaning, every time I dance or get up, it act not good. Please help me with this solution?
Thank you very much!

candacefrommontreal wrote: why does photo booth cut my videos short?...
Because you ********* * ***.
All you have to do to make it work is **** ** ******* ****.
Or: http://discussions.apple.com/message/13305215#13305215
Message was edited by: EZ Jim

Any Effects to make Video footage look dreamy/heaveny

I am trying to see if there is anyway or effect to make some video footage look dreamy or heavenly, it is for a wedding so I want to give it that "mystical" feel. I hope my descriptive words make sense. The footage should almost have a shimmer.
Thanks!

Hi - One way to go is to use third party plug-ins, another is to learn how to combine and use filters in FCE to achieve the effect you want. Final Cut contains dozens of filters, that when combined can achieve very nice effects, and allow you a lot of control. I actually prefer the filters layering process as it keeps me in control of subtle variations of the effect. Here is one way to make your images a little more romantic. The following demo is done on Final Cut Pro, but as Mr. Wolsky pointed out, most if not all of these filters should be available to you in FCE:
I start by editing my scene to the timeline, and locking the audio:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/FinderScreenSnapz002.jpg!
It is a harshly lit shot of Meg The Dog ( a self portrait) with a cheap Kodak Zi8 camera:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/FinderScreenSnapz001.jpg!
To make it look nice, I edit the exact same scene in the exact same position on the timeline to V2:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz001.jpg!
I double click *on the clip on V2,* which is above our untreated clip, and it opens in the viewer. I select the Filters tab (which is empty).
I then go to the Effects Tab > Video Filters > Blur > Gaussian Blur, and drag the Gaussian Blur filter to the Filters tab in the Viewer window, and set it to around 20 pixels of blur:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz002.jpg!
This gives the image a nice soft look:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz003.jpg!
but everything is soft - and I just want the highlights to be soft and hold the detail in the non-bright parts of the picture. So I return to the Effects Tab > Video Filters > Image Control > Brightness and Contrast and drag the Brightness and Contrast filter to the Filter pane in the viewer, setting the brightness and contrast up slightly:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz004.jpg!
Which makes the bright parts of the picture even brighter:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz005.jpg!
Now I want to combine this with the "normal" image on V1, keeping only the blurred highlights on V2. So back to the Effects Tab > Video Filters > Key > Luma Key, and drag the Luma Key to the Filters Pane in the viewer. Note that I switch the Key Mode to Key Out Darker:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz006%20copy.jpg!
Which now gives me nice soft highlights while keeping detail in the scene where the luminance is in the more normal range:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz007.jpg!
To complete the effect, return to the Effects Tab > Video Filters > Stylize > Vignette and drag the Vignette filter to the Filters Pan in the viewer:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz008.jpg!
and this gives me a natural Vignetting look which focus attention more to the subject and has a more cinematic look:
!http://www.spotsbeforeyoureyes.com/DiffuseHighlights/Final%20Cut%20ProScreenSna pz009.jpg!

Why does my mouse make blank spaces on my screen as I move it? It started happening after I downloaded Mountain Lion

Why does my mouse sometimes cause my screen to erase as I move it? It started to happen after I downloaded Mountain Lion.

You could try booting into Safe Mode to see if it fixes the problem. To get out of Safe Mode, restart as usual.

Why does iDVD '11 image quality suck so bad with a slideshow?

First of all, I have spent the last few days trolling forum after forum trying to understand the problem. It seems that for years and years people have been complaining about this issue and nobody ever gives a satisfactory answer.
Ok, I understand the difference between an HD 720p movie and a lower resolution DVD movie at 720/702x480 resolution. I get that. It means that the DVD version has to recalculate the lines using some interpolation algorithm. I can think of good and bad ways to do that myself - I am a software developer and an electrical engineer. I realize that a TV monitor is much bigger than a computer monitor and the lower resolution on a larger monitor won't look as good. What I am seeing goes well beyond that. I am seeing splotchy blacks, awful pixelation, moire effects in water and around just about any two parallel lines, and the occasional odd red-then-green-then-freeze frame.
Here is what I don't get: When I watch a commercial DVD on my TV, it does not look like crap. Sure, a Blu-Ray looks better, but a DVD is quite acceptable. When I watch the slideshow that I made in Aperture, assembled in iMovie, and wrote out as 720p, it looks terrific on my monitor. If I do it as 720 (Large) it also looks terrific. When I downgrade to 480p (the same resolution as a DVD), it looks fine as a .mov file. However, when I take any of these .mov files and go through iDVD to produce a DVD file, I get horrible results - it looks like I used old VHS footage that I had accidentally left in my microwave. Even changes in resolution of the input file seem to make no difference. Why is this?
I have tried using "Best Performance", "High Quality", and "Professional Quality". I would rather label them as "Lousy", "Lousy", and "Lousy". To my eye, they all look equally poor.
Is there file file format that I should be using rather than the default .mov format? .dv or .m4p? Is there some other setting I should be setting? Does the DVD media itself make a difference? I am using Kodak DVD+R media. I read somewhere that Verbatim DVD-R was the way to go. Is this true?
Finally, is there perhaps another route I should be exploring? I looked at DVD Studio Pro, but that is not affordable. I considered writing a Blu-Ray instead, but buying a burner and software is not worth it at this point. What about another app? Even on the PC, I am flexible.

There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
http://www.lqgraphics.com/software/phototomovie.php
(Other users here use the alternative FotoMagico: http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie 6 as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast, for burning.
You will be pleasantly surprised at how professional the results can be!
To simply create a slide show in iDVD 8 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
http://support.apple.com/kb/HT1089

Why does iDVD keep giving me a multiplexing error and ejects my DVD?

I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
dennis

Hi
Multiplex Error - is one of the most complex error to run into - can be so much
see (especially new info at end of list)
MULTIPLEX ERROR !
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W

Why does my Gopro black 3+ video look so bad on PRE11 while editing & after DVD creation playback.

Well let start with. When I do a project with video from my Samsung S4 phone or my IPhone 5 or my Canon T4i looks great on computer screen and when I play back a burned DVD or AVHCD. I just directly import from file on my hard drive. My Samsung is at 1920x1040 30fps mp4 . I believe the IPhone is a 1920x1080 MOV format.
It is the GoPro video that PRE11 has a problem with. I record at 1920x1080 30fps. Nothing special.
First the computer screen. On both of my computers when I right click on the playback screen.
Quality Highest; Magnification Fit; Safe Margin unchecked; Playback External device None; Aspect Hardware; Desktop Audio; 24Progresive Conversion Interlaced 2332; Export External Device DV 29.97 720; Checked Disable video output.
As for Publish. DVD I use preset NTSC widescreen dvd; AVCHD h264 1920x1080I ntsc.
Any other ideas why the GoPro video looks bad on computer screen & on dvd on hd tv.
Some say you first must convert GoPro mp4 to AVI then import. That seems crazy. Why can Samsung mp4 work great and GoPro mp4 not.
It seems that Adobe has not correctly written code for MP4 from on of the largest camcorder producers.

john1234321
Thank you for starting your own new thread on your Premiere Elements workflow after initially posting in the thread of another.
Adobe Premiere Elements 13 Latest Developments
For your convenience, this is a copy of my reply to you in that thread which was left unanswered
johng1234321
Thank you for the reply. What I was looking for mostly are the properties of the 1920 x 1080p30 GoPro3+ Black footage that you are trying to use in
Premiere Elements 11. Are you working with the H.264.mp4 format or are you working with a Cineform.avi format? If it is the H.264.mp4 format, I am not seeing why you should be doing anything else but importing the H.264.mp4 into Premiere Elements 11 using the project preset set by you manually or the project automatically. Best you set the project preset manually to assure the correct project preset in this case.
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
There are times when the project does not interpret correctly the properties of the video when it is the first file dragged to the Timeline. When it does not do it correctly, it does not give you the closest possible fit between project preset and properties of source media, instead it gives you its default 1080i which is not appropriate for your 1080p footage.
http://www.atr935.blogspot.com/2013/04/pe11-accuracy-of-automatic-project.html
To get a better perspective on your comparison between your cell phone and GoPro results....are you saying that you can take the videos from the cell phones and import them into Premiere Elements 11 without issue, audio out of sync or other? Are you converting the cell phone video at any time - to change a variable to constant frame size or other?
Depending on your details, I would offer to look at a sample of your specific H.264.mp4 file for which you cannot get a decent DVD-VIDEO on DVD or AVCHD format on DVD disc. If you opt to do this, you might consider sending the sample via a Dropbox link posted in this thread. I am concerned that your GoPro issue on Premiere Elements 11 is going to get lost in this thread on a different topic. If we do not gain ground on the issue soon, please consider starting a new thread on your issue so that the details and especially the results will be found more easily by those users seeking answers for the type of problem that you describe.
The answers will be in the details.
Thanks for the follow ups.
ATR
ATR

Why does iDVD '11 make my footage look darker?

Similar Messages

Maybe you are looking for