Why does image animation not display in project preview or published?

Most of my slides involve 4 images. I've staggered their appearance at .3, .5, .7 and .9 seconds. All works well when I preview the individual slide. But previewing the project, or publishing it, results in them all appearing simultaneously at .0 seconds. How do I correct this?
Thanks,
bberg1

Thanks for your reply. I checked the timelines and they look correct. Of course, I can see the timelines only in the preview of the individual slides, when the animation works fine. Capturing the slide preview timelines would therefore not help with the problem. Once I preview the entire project, the timelines are not accessible, and the images 4 images appear all at once at .0 seconds rather than sequentially at .3. .5 .7 and .9 as in the slide preview. What is most puzzling is that some of my projects, with the same settings as far as I can determine, work just fine in both the slide only and project preview.
Bert

Similar Messages

  • TS1398 Why does my iPad2 not display the WiFi icon?

    Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

    Try the following:
    1. Reset the AirPlay devices
    2. Reboot the router
    3. Reboot the iPad
    Note: The AirPlay icon is now in the Control Center

  • Why does Email text not display, only the header?

    When opening an email message, the text or graphics if applicable does not display.  The messages display in my Inbox along with the Preview Pane, but when opened the text box is blank.  Why?

    Close out of the mail app, then double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • Why does icloud mail not display clearly?

    Why does my ipad 2 with icloud mail not clearly display my mail?

    Depends on what "not display clearly" means.

  • Advanced actions not working in project preview or publish

    I have a project with advanced actions which work fine in single slide preview but which don't work at all in project preview or when I publish.  To make it even worse a slide on the same project I did earlier works ok when previewed.  Very confused!  Any suggestions?  I have used the force publish option and all the timelines look the same as the successful slide as far as I can see so I have no idea.

    Hi Lilybiri,
    sorry for the delay in replying, I've been tied up elsewhere.  I'm using CP7.  My advanced action is simply meant to show one image after another on click of a button.  It works perfectly for the first instance and then doesn't for the next two.  The only difference between the slides is that the latter two have the images stacked on top of each other whereas the first slide has the images placed separately on the slide.  This is the advanced action for the first slide:
    The decisions just refer to the images.  And this is the timeline:
    Compared to one of the slides that doesn't work (no images appear)
    where again the decisions are just referrring to showing images, and the timeline for this slide:
    As I said they both look the same to me apart from the layering of images on the second slide. Any help much appreciated!

  • Why does Image Capture not see my scanners?

    I have two multi-function printers - a Canon MF4350d and a HP Officejet J4550 - both connected to my iMac and both printing properly. But when
    I open Image Capture it does not see either device. How do I get my scanners functional?

    Check this thread: https://discussions.apple.com/thread/5540452?start=0&tstart=0
    It would seem there are updated drivers for (some) HP scanners.  Doesn't appear to be the case for Canon.

  • Why does image trace not align with the image?

    I'm using a fully updated version of Illustrator CC 2014 to trace images that have had the background removed by the client. No matter what settings I choose, it appears the tracing result is offset slightly in both X and Y axis. See my screenshot below. I found someone who reported this problem early last year in CS6 but received no useful suggestions. I do laser cutting and want to cut around the image so this is problematic. I originally thought perhaps the image had anti-aliasing or not fully white pixels in the background, but I'm using a threshold of 254 which means anything greater than (0,0,0) should become black. So while there could be off-white pixels to the right of his head that pushes the line past where I want it, the outline should include the hair and shirt on the left which it is not.

    I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5.  If this app can do it, then one would presume the other apps could be updated to do it also.
    From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
    Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM.

  • Aaaargh!  Why does my website not display on my iPhone?

    Of course, the first thing I tried with my new iPhone is to view my own website. Safari on the iPhone thinks about it for a few seconds, then renders a completely blank white screen. Safari on Windows, as well as Firefox, IE, Netscape et al all manage to render...something. The W3C HTML validator reports only one minor issue with the HTML (can't decipher charset), but I've fixed that in our development area and the iPhone still renders a blank page. Any thoughts?

    lentesta,
    Looking at the page you reference I have noticed one thing.
    You reference a style sheet that can not be found, because the link references a local drive letter, not a valid URL. This reports an error in each of the browsers I have tried, but most render it anyways.
    This might be part of the issue.
    Hope this helps,
    Nathan C.

  • Why does my website not display properly using firefox

    My website boscarn wedding cars opens as it should using internet explorer or chrome etc, however recently I received complaints about the layout or display of my website using mozilla firefox.
    I have investigated and research ways to fix this and have gotten no where.
    I have no control over people using firefox if they want to, but when it starts effecting my business I have to try and get it sorted.
    I use windows xp pro but know that this same thing happens on windows 7 and 8 also.
    I use daily.com instant website, web hosting to create my website. The site is www.boscarnweddingcars.co.uk please take a look and advise on how to fix this problem.
    Please get back to me as soon as possible. this is my livelyhood.

    I have this problem, too with my website, www.intimacytravel.com. See the comparison attached between using Firefox and the way it should look using Internet Explorer. I also have a problem editing the site with Firefox.

  • Why does image capture not recognise mac camera

    When i go onto image capture, it says there are no camera's or scanners. How do I find the original camera that came with the mac (there is definitely a camera on the mac)? Is this possible?

    Image capture is for importing/copying images off a camera memory card or from a scanner. It doesn't activate the built in camera. For that open Photo Booth.

  • When I open a pages doc why does the text not show but the preview in Finder shows the text?

    Doc shows a blank page but shows the number of pages at the bottom and flickers the text when I click on Outline icon.

    In most cases it is because you have not updated Pages to the current version.
    Peter

  • PreE V8: Clips not displaying in project view

    I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?

    I have been shooting in XP+ mode and have been for the past year.
    I haven't tried using the Premier Elements Get Media function. I usually import both still images from one camera and the video from this camera at the same time into the same Photoshop album and use Organizer. Also there are some training videos and books that tell you to use Organizer.
    I tried importing a video file using the Get Media function and was able to use the set in/out points and have them saved correctly.
    Then in the project that I am working on I took one of video files that I imported through the Organizer and deleted it from the catalog. Then I imported it using the Get Media function and put it in the album with the other files. Then I used Preview to set in/out points. Those points were saved correctly.
    So know I will delete all the remaining video files from the catalog that I haven't yet used in my project and then remote them through Premiere's Get Media.
    So it appears that as you thought, I need to use Get Media to import video files. But that is not emphasized in any documentation. I think there should be a warning when importing video files in Organizer saying that if you intend to use Premier Elements to edit them that they should be imported via that product.
    Thank you for your assistance.

  • Why does image / photo in lock screen appear like background?

    why does image / photo in lock screen appear blurred in ios 7.0.3 on iphone 5?

    Sorry, the image is not visible.
    Some  of the display settings are stored in PRAM. PRAM reset is harmless.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • Some images do not display on E-Bay with FF 11

    Running Vista. had no problems with E-bay using FF 10 or lower. some images will not display, and when a image that does show in the category, when selected, it does not display. I am running FF11 on my xp machine with no problems.
    every thing on E-bay works with IE

    It's not recommended to go back to Firefox 10 due to known security vulnerabilities. It's still available if there's no other solution.
    Another standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in [http://support.mozilla.com/kb/Safe+Mode Safe Mode] using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    If the images load correctly, this points to an add-on or custom setting or perhaps a saved password as the problem. A few things to work through.
    If the site doesn't load correctly, we would have to consider other factors.
    Any luck?

  • Animation not displaying properly in Firefox

    My animation not displaying properly in Firefox. I have searched this forum and others but am only able to find outdated solutions (such as updating to the latest release of Animate). I am on the most current versions of Animate and Firefox and still having problems. Does anyone know of a solution to this, or can direct me to a discussion that already covers it?
    An interesting thing to note is that only the center tree is acting differently, though the commands for each seem to be the same. Also the small mountains are fine, but not Mt Rainier.
    Here is my test page:
    http://jonnyart.com/test/NewYearsAnimation
    Thanks!

    In case anyone else runs into this issue, I was able to resolve it by rebuilding those portions of the animation.

Maybe you are looking for

  • What is difference between Shared ,Exclusive and Exclusive but not commulat

    what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

  • Problem in moving FG divs

    I have created two FG divs for Mission and Vision. And i want to move the Vision div to its  right side and also the Mission div to its right side ,so that both of the divs appear some what in the middle of the browser. But when i move it the vision

  • Video blog works with safari, but all of a sudden firefox NOTHING

    Hey gang.... www.danhproductions.com.....on the demo video section always came up no problem...just noticed on my firefox it will not show the video blogs and says at the bottom: # Exception: TypeError # Message : localizedSpans.each is not a functio

  • Status Change with Compulsory Original File Attachment

    Hi, We have created a document with 3 statuses (Created, Acknowledged, Released). DIR will be created with "Created" status. When the status will change to u201CAcknowledgedu201D system should check whether the DIR has a original file checked in. i.e

  • Java API of javafx?

    Hi, Is there some kind of Java API of javafx? I don't want to learn javafx's scripting language, and although I understand Sun's decision to give a scripting interface, I don't want to learn it b/c it will make me violently vomit. Unfortunately javaf