Why Does ImageReady.exe Run on My Laptop?

I have the Sattelite L955-S5370 (Windows 8). I noticed that two instances of ImageReady.exe are running as processes. From my research, this is part of Adobe Photoshop. However, neither Photoshop nor Photoshop Express has ever been installed on this laptop. The only Adobe product that has ever been on this laptop, to the best of my knowledge, was Adobe Reader.
I'm not complaining; these processes don't seem to be causing any problem, from what I can tell. I'm just wondering how in the heck they got onto my laptop?
Solved!
Go to Solution.

Satellite L955-S5370
There are only so many file names. Some with the same name are different files. And of course Adobe may use the file for many products.
For clues..
   a. locate the path to the file
   b. right-click the file, click Properties, and look at the Details tab.
-Jerry

Similar Messages

  • When I reboot, why does NISerialRegistryMaintenance.exe run?

    This is a VXIpc-872B which was ghosted from another VXIpc-872B which has a successfully running application.
    We see the NISerialRegistryMaintenance.exe window pop up after reboot on the new pc, but not the previous.
    Maybe there's another setting we don't have correct?
    Thanks for help

    It's ok. We solved the problem by removing all the networking Protocol and Adapters on the new PC. Now NISerialRegistryMaintenance.exe runs, but very quickly so all we see is that the window pops up, then goes away. I take that to mean that it was timing out before. Which leads me to believe that the networking was set up differently between old and new PCs. Since we don't want any networking, we just got rid of it.
    Thanks.
    Margaret

  • Why does NiVisaServer.exe is running when Labview is running??

    I am running two identical test setups for some system testing.  The PC configuration and test cases are same on both the setups. I am using  Labview version 8.5 . I observe the setup running with NiVisaServer.exe is slow as compared to the other setup. The same file is not running in the other setup.  My question is , does NiVisaServer.exe slow down the Labview execution?? Why does NiVisaServer.exe is not running in the other tester eventough both are identical??

    More than likely it might have been accidentally set to start up when the PC starts. See attached screenshot for where this is configured in MAX.
    Attachments:
    VISA Server.png ‏85 KB

  • Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

    Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

    See also https://forums.adobe.com/thread/1654402

  • TS4062 Why does you tube run slow you tubep

    Why does you tube run so slow in hd

    Actually, it is keep vid dot come, not save vid that i used, but both are legit websites that allow you to download videos from anywhere without a lot of hassle or unsafe plugins. Sorry about any confusion.

  • Why does the fan run for long periods on macbook pro

    why does the fan run for long periods on macbook pro?

    to keep the internal components of you mac at a safe operating temperature.

  • Why does ath.exe stop working

    WHy does ath.exe stop working and what can I do to repair it?

        i'm sorry you're having issue swith the sound on your device chawntae. I know this is frustrating but we are here to help. What phone do you have? Are you using a headset, bluetooth, or just the speakers? Is there any damage to your phone?
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • Why does iCloud email run so slowly in Firefox? Typing is frequently stopped and "non-responsive" shows up and everything freezes for a while

    Why does iCloud email run so slowly in Firefox? Typing is frequently stopped and "non-responsive" shows up and everything freezes for a while. Doesn't happen with Outlook or Google?

    Hi,
    You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''. If it is okay, you can then install the Mozilla Archive Format add-on.
    If you have security software installed you can try to delete all existing entries for Firefox and its sub processes in the different configuration modules and try to fully trust/allow Firefox afresh. Even after network access is completed, Firefox would still need unlimited access to its disk cache/memory as well as its files. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
    [http://kb.mozillazine.org/Firewalls AV/Firewall Configuration]

  • Why does Photoshop CC run so slowly on my computer?

    I just downloaded it and am running it on brand new HP laptop with good specs and nothing else running.  It takes 5-10 minutes to run a single action or resize an image. There is no way I can keep up with my work flow at this rate. My Macbook pro is currently being repaired which is why I downloaded it on to my HP. What can I do to help this situation?

    You can start by giving more specifics:
    - what is the CPU name and the how much RAM do you have in the laptop ?
    - what size of images are you trying to manipulate ?
    - does other software run slow on this machine as well or Photoshop only ?
    - do you use an internal or external drive to store the photos ? If external, what kind of connection - USB 2 or 3 ?

  • Photoshop CC can't install ImageReady.exe running

    I have tried multiple times to install Photoshop CC.   After completing the download, then extracting I get a message:
    at 42%
    Photoshop CC Install
    Please close the following applications to continue:
    -ImageReady.exe
    Nothing is running.  HOW CAN I GET THIS SOFTWARE INSTALLED.
    Logged into my administrator account and nothing is running.

    Hi visualjmm,
    Try to restart the machine or select the option in Task Manager>Processes tab, which says show Processes from all users and then check for this process.
    Regards,
    Vinay.

  • Why does Photoshop CC running slow when using Mixer brush tool

    Why does Photoshop CC and Photoshop C6 running SOOO slowly when using Mixer brush tool??
    Only to create one stroke it takes several seconds.
    I have to wait a long time to do next stroke. I can't work with this. How do I fix this??
    I have a new computer, a Mac Book Pro with 16 GB ram, so I have plenty of ram.

    You really have to keep your brush size small with the Mixer Brush tool.  And that necessitates keeping your canvas failry small as well.
    Back a few years ago I did a whole painting with the Mixer Brush once and some of the bristle brushes - just to see if I could - and I found I had to really limit the brush size (e.g., to 50 to 75) in order to get enough responsiveness to keep painting.  In that case my canvas was 4096 x 5120.  It's not impossible to get a good, professional result, but you have to be careful about sizing things right.
    -Noel

  • Why does my ipod run slow

    Hello people
    I was wondering
    Why does my ipod 4g run slow if it has enough space available?

    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.

  • HT1430 Why does my iPad run slow

    Why is my iPad running slow and closes a page when I'm on it?

    Some general troubleshooting steps in order:
    Terminate the Safari Application and restart it. Click the Home button to return to App screen. Double click Home to bring up the App tray. Touch and hold the Safari icon until “-” appears. Touch the “-” to terminate Safari. Terminate all other Apps listed as well. Then restart Safari.
    Use Settings > Safari > Clear History and Clear Cookies and Data
    Restart iPad: Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off the device. To turn it back on, press and hold the Sleep/Wake until the Apple logo appears.
    Reset iPad: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the "Slide to power off".
    Restore iPad: Connect to iTunes on a PC/Mac and do a restore.

  • Why does compiled (EXE) VI run when you double-cli​ck the icon even though I un-checked "Run When Opened"?

    My VI code uses the VI's that came with the NI  USB-8451  USB-to-SPI converter.  Before compiling I needed to use one of those VI's to select the particular USB device that I'm trying to address, then I click the Run button.  But after I compile my code into an EXE file, and then double-click the executable file it immediately starts running without allowing me to select the USB device - even though I un-checked the "Run When Opened" box.  In fact I also un-checked the Show Menu Bar and Show Scroll Bars boxes as well, yet it shows both of them.  What am I doing wrong?

    It seems silly to start and stop a built LabVIEW application from the toolbar. A complete application should always run and have the LabVIEW toolbar hidden. A user of you code is not supposed to be familiar with LabVIEW mechanics.
    You should do all this in code. Really!
    Do a nice state machine with at least two states. (1) a state for where the device has not been entered and is simply waiting for your input, and (2) another state that verifies your device input and hands it to the rest of the code for afterwards.
    Still, what LabVIEW version do you have. Did you set the "run when openend" setting in the application builder for the desired VI or just in the VI itself?
    LabVIEW Champion . Do more with less code and in less time .

  • Why does my .exe file run on the PC I created it on, which has LV installed, but it will not run on a PC which does not have LV installed?

    I am trying to run a stand alone application on a PC which does not have Lab View installed. I created the executable file and the installer. However, when I run the .exe the VISA functions contained in the VI return error messages and the power supply I am trying to control does not respond. The stand alone application will run on a PC that has Lab View installed. 
    My application initially used a VISA resource control to selct the instrument GPIB address on the PC I used to create the application. Since the PC I am trying to run the .exe on has an older version of NI-MAX I cannot create aliases that the VISA control can interpret.I have tried to upgrade NI-MAX hoping that would solve my problem:
    Here is what I tried:
    uninstall NI-488 and NI-MAX ( if you want to uninstall MAX you must uninstall NI-488 ) reinstall NI-488 and NI-MAX Ver 3.1 then try to install NI-MAX version 4.1 which I downloaded from NI website. When I do this I get an error message when I try to run MAX. None of this worked so I hard coded the instrument address as a constant and again that works on the PC with LV installed but does not on the PC without LV.
    Any input would be greatly appreciated.

    It looks like you do have the LabVIEW runtime engine installed.  It might be that the VISA drivers you have are not compatible versions.  In NIMAX, look under software to see what versions of VISA software you have installed on both systems.
    It does not matter what version of NI MAX you have installed, since your application does not use NI MAX.  NI MAX only helps you look at (or simulate) the hardware and software you have on your system.
    One thing you could do is include drivers and the runtime engine while creating your installer.  That way, you should be able to do a complete install on a clean system.
    Message Edited by Sudhir Gopinath on 06-19-2007 12:26 PM
    S G
    Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor

Maybe you are looking for

  • Passing of ResultSet to Stored Procedure(Oracle 8i)  from Java

    My requirement is such that I want to send a resultset to a stored procedure(In oracle8i). Through Java API's. The input parameter to the PLSQL is a ref cursor. I am trying to send the resultSet using CallableStatement of java but it is throwing an I

  • ISR goes to 100% after I plug a VGA screen into my RT desktop

    Hi, has anyone seen this - my RT system is running smoothly until I plug a normal VGA screen into the RT desktop.  Then the ISR  CPU usage jumps to 100% (see attached image).  This prevents any of my RT timed loops or other processes from running and

  • Trying to convert a .psd to .pdf without changing dimensions

    I have a whole bunch of label sheets that I've created in CS4. I would like to convert them to PDF so I'm not the only one who is able to print these label sheets. When I "save as" .pdf, what prints on the page is about 20% smaller than the original

  • A method call question.

    I am trying to check if leg1 is a positive integer, but I method call checkleg, and perform my if statement, but it will not return a 'valid = true' to my public static main. It is always false. please help! * TriangleTest.java * Created on October 3

  • Multiple skype instances

    Hi there, is tehre a chance to somehow block or disable multiple log on to skype account from different computers? Whoever who knows my pasword, my girlfriend for example, can log on and watch my conversations with other. Don´t even wanna think who e