Why does Indesign CS6 Tools panel cover up the left side rulers?

Every time I open a window in Indesign CS6 I have to slide the window to the right so I can use the left-hand ruler and the x close button. Is there any way to change this in preferences? Or is this a glitch?
Thanks!

It is actually not a preference.
Method 1: Go to menu WINDOWS->ARRANGE
Method 2: Move the window with the mouse. When the window edges touch the tool bar edges, the window should be framed by a blue frame. Let go and it will be tabbed.

Similar Messages

Why does my iPad have three lines on the left side of the screen.

My iPad has three lines that goes all the way to the top, over the bars for Att and all the way down over the keyboard.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Why does InDesign CS6 forget my preferences when I re-start?

Why does InDesign CS6 forget my preferences when I re-start? Not every time, but often. It's very frustrating to have to re-enter all my prefs. Every once in a while I start up InDesign CS6 and the new document dialog shows page sizes in po (I always use inches) and the prefs all seem to revert to default.

Do you have a Windows PC and when shutting down, is Indesign still open? If so, this can result in a damaged preferences when still writing while Indesign is being terminated by the system.

HT1602 Hi, does my iPhone need to be on the left side of my body to work well with the Nike+ sensor in my shoes? I used it on my right side and the calibration was so off point.

Hi, does my iPhone need to be on the left side of my body to work well with the Nike+ sensor in my shoes? I used it on my right side and the calibration was so off point. I recently got a Bluetooth headphone and the antennae is on the right ear piece. For seamless connection am required to have my iPhone on my right arm if am using the headphone outdoors.

I was wondering this too. Did you ever get an answer? I just bought a non-nike pair of sneakers and have a pod pouch now on my laces. I have it tight, at the lower part of the laces so its flat. When its on the left side my time is very similar to what it was when I used the nike shoes. When it is on the right side, my time is about 35sec/mile higher. I wonder which is more accurate and if you are supposed to have them on the same side. If so, then that is as accurate as with my nike shoes. Hope we get an answer soon. Im about to return everything its so frustrating.

TS3048 Can you buy a replacement for the little battery cover on the left side of the wireless mouse?

Can you buy a replacement for the little battery cover on the left side of a wireless keyboard?

Did you try a Google search for one: battery cover for Apple wireless keyboard
OT

Why does InDesign CS6 stop recognizing .indd files?

I'm running CS6 on Mac OS X Mountain Lion with my user account set up with Active Directory and I continue to have the same error where InDesign stops being able to open .indd files. I've been having this error happen about every 2nd day for the past 3 weeks. A dialogue message pops up that says "InDesign cannot open CS 5.5 documents" then it won't open any files anymore until the computer is restarted. The program often crashes when I try to quit after getting this error.
I say "stops opening indd files" because it's not an error that occurs with one individual file, and these are always files that I have opened, worked on and re-saved within a half hour of trying to reopen them. It seems to occur when I'm opening, printing and making PDFs from a large series of files (I work in a production studio and can work on up to 100 documents at once).
The files have been built in CS6 (and not carried forward from a previous version), are located on my desktop as I work on them, with links stored on a local file server.
Any ideas on how to fix this? I'd rather not have to nuke my whole user account to find out that the problem persists :/
Thanks,
Sarah

Thanks for the suggestion. I tried resetting the preferences and the error re-occurred within 20 minutes of working within InDesign.
Just finished uninstalling CS6, running the CS Cleaner Tool and reinstalling again. I came across this solution in this thread where someone was having somewhat similar file recognition problems with InDesign. We'll see how the new install goes (fingers crossed).

Why does InDesign (CS6) run so very, very slowly on my Mac?

Any idea what may be causing InDesign to run like it is stuck in molasses? Everything takes minutes: saving, opening a new document, opening an existing file, importing images, entering text - all slow. Any thoughts?

2 GB RAM
That's not enough RAM for Mountain Lion and ID, so ID is forced to go looking for open disk space. I think you'll need at least 8gb RAM.
2gb is Mountain Lion's minimum req.

Why does my menu bar keep blinking in the left corner of my screen?

y menu bar keep blinking in the left corner of my screen?

There used to be a disk activity or network activity indicator you could download that would make the uppermost left cluster of pixels flash when the disk or Network was accessed.
I expect you have added some third-party utility that has installed this feature for you.

Why do I get a black rectangle on the left side of the screen when I import a clip in Imovie?

I import a clip into imovie 6 and I get a black rectangle on the left side of the screen. It's driving me crazy!

Thanks for the reply.
My original source material is in Apple Intermediate Codec, with 32-bit float audio and a variable frame rate. This has not been friendly to FCP, so I use Quicktime to convert it to Apple ProRes with 24-bit audio and 29.97 frame rate. This is what I import into FCP.
My sequence settings are set to the same specs as my source material. 854x480, square pixels, no field dominance, Apple ProRes compression.
The black bar on the left side of the screen shows up before I even export. It shows up when I render everything.
I am exporting with Quicktime Conversion to:
MP4
h.264 codec
720x405
1000 video bit rate
Main Profile
No cropping/filters or anything.
The ONLY thing I did different before upgrading to FCP6 was that I used Apple Intermediate Codec all the way through. I was told by an FCP instructor that writes and publishes all kinds of FCP training material that I should upgrade to FCP6 and use the Apple ProRes422 Codec instead, so that's what I'm trying to do.
I am going back to restart my project using Apple Intermediate Codec all the way through like I used to, but it will be awhile before I can tell if that solved the problem. Either way, I would like to be using the ProRes codec....
Thoughts?

Why does Photoshop CS6 blink on Windows 8?

When using Photoshop CS6, my screen blinks and flashes, especially when using editing tools or adjusting the image (increasing/decreasing size.) I am an Adobe Cloud member and using a new machine that has Windows 8 which I am still getting used to. I had been using my CS apps on my laptop/W7 with no problem whatsoever. Not sure if the OS makes a difference. Suggestions? Thank you.

This may help some people. On another site: http://www.tomshardware.com/forum/342967-33-switching-onboard-graphics-nvidia-graphics-car d
A gentleman replied to the question of how one switches from the onboard (not so powerful) graphics processor to the video card (very powerful) using software in the case of nVidea cards. It is easy, and might work out some of the kinks. I have switched and will now try to see if I can mess up PSCC using the higher setting. bbiab
Yes, this is called 'Optimus Technology' developed by nVidia, where your main graphics card is the integrated one and it works together with nVidia dedicated/discrete graphics card to deliver great performance but still save battery live. It's basic, the nVidia one is powerful and the Integrated one is not. But the nVidia one is power hungry and quickly put down battery very quick, where the integrated one does not. So what nVidia do is, when you are gaming, they automatically switch to use the nVidia so the performance is high. When not gaming, you turn of the nVidia one and switch back to the integrated graphics. But this does not work when you don't set it up yet. Don't worry, it's not hard and does not require change on hardware, only software. The first thing to do is, go to your nVidia driver by right clicking on your desktop and choose 'nVidia control panel'. If you can't find it go and download the driver. After you are at the control panel of nVidia, in the left side of that window there is 'Manage 3D settings' Under the 'Select a Task'. Click on that and you see in the other part there is a 'global settings' tab and 'program settings'. Go to the global one and in the 'preferred graphics processor' choose 'High Performance nVidia Processor'. You should then have the optimus technology when you choose apply. The 'program settings' in the other hand is to choose what graphics card you want to use for each program of your preference. So you choose on your program and select your preferred graphic card there.
P.S. Some programs are sadly not supported by the Optimus graphic card, so which means that the program will still run in the main graphics (which is the integrated graphics) and you still have the integrated performance. To get rid of this issue you must to contact your nearest ASUS service to disable the optimus technology.
Sorry for grammar mistakes............."

Why does illustrator cs6 crash or lock up?

why does illustrator cs6 crash or lock up when i try to save any file that has a placed image in it?

Please follow these steps:
Open the “Task Manager” when the Adobe Illustrator CC crash window is displayed.
In the Task Manager window right-click on the name/string “Adobe Illustrator CC” and select the option “Create Dump File” in the context menu
It will display a dialog which says that it will create a file “Illustrato.dmp” in your “Temp” folder. Click on OK to create this. Wait for the action to get this completed.
Once the above file gets completed you can have this file by typing “%temp%” in your “Run” window (press “window button + r” on the keyboard). On clicking the enter key the TEMP folder can be opened.
Look there for the file name “Illustrator.dmp” and share it with us a dropbox link on [email protected]
Please also mention the thread link when sending the dropbox link.
Regards,
Dhirendra

Why does Premiere CS6 drop frames in capture?

Why does premiere CS6 drop frames when I capture from my Canon Visia HV40 via Firewire 400
Bob Lamb [email protected]

1st, more computer information might help... such as the Information FAQ http://forums.adobe.com/message/4200840 questions
2nd, some other software to try... to see if the problem is with your computer, or CS6
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html -and http://forums.adobe.com/message/4708997
I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

Why does dragging on a Touch Screen change the cursor into a Hand Tool?

Why does dragging on a Touch Screen change the cursor into a Hand Tool? This did not happen in CS 5.5 and I could edit on my touch screen monitor. With Photoshop CS 6, as soon as I start to drag, the cursor changes to a hand cursor. I have look at all of the system options and nothing seems to affect it so I have to assume it is something wrong with Photoshop CS 6.

Try staying with it for a while. It is much nicer panning that way. Give it a flick, and touch the screen again when in the right position.
I think it came in with CS4 BTW, but it makes a lot of sense keeping it on the Touch version.

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import pdf?

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import single pdf or multiple pdfs? frequently happens(2/3 times)

Can you provide any more information about the files that are causing the problems? Are these particularly large files? Many pages or images? Have you opened these files in Photoshop CS5, or other versions of Photoshop?
What do you see when you try to import these PDFs? Do you get the PDF Import dialog, allowing you to select pages or images from the PDF? Is so, is it hanging when you click OK or at another time?
Any more details about the problem or other info (as well as sample files) you can provide, the easier it will be for us to help identify the cause of your problems.
Paul

Why does Vertical Align Center align objects along the horizontal?

And why does Horizontal Align Center align objects along the vertical?
-g-
P.S. Please please please make the Eydropper tool available by function key so I can toggle to it while using the Text tool. Please!

g,
but when I select two objects and click the vertical align button they snap to an invisible horizontal line
This is (almost) identical to:
Because (the centres of) vertically aligned objects will be on the same horizontal level/line.
And that is just one way of expressing what vertical alignment means. Here are a few others:
Their centres have the same height,
Their centres have the same Y value on the Artboard/Workspace,
In all cases, you can draw a horizontal line through their centres.
Mathematically, Y = C (Y is a constant value C) is the equation for a horizontal line.

Why does Indesign CS6 Tools panel cover up the left side rulers?

Similar Messages

Maybe you are looking for