Why does Indesign shutdown when I try to print with Windows 7

I installed CS5 on an Windows 7 machine and it worked fine for a while.  Now when I print in Indesign it shuts the program down before it even gives me print options.  I have uninstalled and tried different versions of CS with no success.  I have done a virus scan and used Combofix.  I currently have CS6 installed.  Nothing works.  What do you think is the problem?

How about if I just copy the error messages here.
Faulting application name: InDesign.exe, version: 8.0.0.370, time stamp: 0x4f72c3ee
Faulting module name: hpltglr6.dll, version: 0.3.0.0, time stamp: 0x4ad59093
Exception code: 0xc0000094
Fault offset: 0x000132a7
Faulting process id: 0x17e8
Faulting application start time: 0x01cdf400ef3aafbe
Faulting application path: C:\Program Files\Adobe\Adobe InDesign CS6\InDesign.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\hpltglr6.dll
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: InDesign.exe
P2: 8.0.0.370
P3: 4f72c3ee
P4: hpltglr6.dll
P5: 0.3.0.0
P6: 4ad59093
P7: c0000094
P8: 000132a7
P9:
P10:
Attached files:
C:\Users\atims\AppData\Local\temp\WER9B56.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\atims\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_InDesign.exe_777 9f427fd7504eee2732ee6a9d12b89f07cf3_1112b0d9
Analysis symbol:
Rechecking for solution: 0
Report Id: 0c41c259-5ff4-11e2-926a-00219bf3d791
Report Status: 65

Similar Messages

  • Why does it say when i try to buy a app it says wrong payment method

    why does it say when i try to buy a app it says wrong payment method

    rick284 wrote:
    why does it say when i try to buy a app it says wrong payment method
    You need to Contact iTunes Customer Service and request assistance for an answer to your question.
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Why does facetime freeze when I try to connect?

    Why does facetime freeze when I try to connect?

    First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Why does my mac when i try to format my stick say that unable to write to the last block of the device

    i bought a new mac with osx lion 10.7.why does my mac when i try to format my transcend 8 gb stick in disk utility say that it is unable to write to the last block of the device?please help me

    This may or may not work, but it's worth a try.
    Using Disk Utility, try an re-partition the drive into two partitions, making the second partition very small (a megabyte or two), then see if you can format the first partition normally. Leave the second partition alone.
    If this works, then the first partiton is what you will use.

  • I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

    I cannot select the Paper Size when I try to print with HP Photosmart B110a
    The same printer was working OK with my old PC with OS Windows 7
    However I got a new PC with OS Windows 8.1 64bit
    I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
    In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
    Do you know what may be the problem?
    Thank you

    Hello Nanu64,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to print from your computer.
    I also see that you stated that not all the options are available in the printing preferences options.  This could be because the installation was not complete or it failed.
    I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
    The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software.  Once the uninstall is complete, reboot the computer so that the changes take affect.
    When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
    The following download is the HP Photosmart Full Feature Software and Drivers.  Save this download to the desktop of the computer so that it creates its own icon.  This will make it easy for us to find when the download is complete.
    Double click the new icon and follow the installation instructions.  The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable.  Connecting the usb cable before hand can cause an issue with the installation.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

    When I try to print using Windows 2008 print server I have to use the generic print drivers supplied. If I use the OEM driver the printer locks up. I have tried a HP 4 plus and a Canon Copier.

    A number of vendor drivers written for OS X cannot be used when connecting via SMB to a printer that is shared by Windows. This is due to limitations of the driver.
    In some cases, if you were to enable the LPD Print Service in Windows, you can connect to the share using the same syntax as SMB but on the Mac you would use the LPD as the protocol.
    If you can reply with the brand and model of printer you have then we may be able to provide more information.

  • Adobe Indesign/Illstrator, when I try to print, there is no tabloid or custom page size available?

    In both my Indesign and Illustrator (CS6), I can set up the document as tabloid size but when I try to print there is no Tabloid or custom size available under paper size of print setup and it will only print smaller. I need to print a page that is 8.5X14 as 11X17 with marks and bleeds. Urgent (for work), please help!

    Thank you! That was the solution,but once I changed the driver to document writer  it was fine!

  • Lightroom 4. I have a large image (scanned) 10,000 X 14000 which does not Render when I try to print or export.   Regular sized images work fine.

    In Lightroom 4:Mac OS 10.6.8.     I have an expecially large image (scanned) which is 10,000 X 14,000.  I have edited it but when I try to print or export the image, it starts to "Rendering Page" but gets stuck and is unable to complete the task before it times out.    When I use normal sized photo images (raw), it works fine.  I suspect the problem is related to the size of the file.   Is there some way I can reduce the size of the image while in Lightlroom?   Or is there any other solution? 

    You originally posted on a thread that really wasn't related to your problem, so I branched the discussion.
    Check the Windows System Event Viewer to see the details of the crash, most importantly the name of the faulting module.
    Most crashes on Open or Save are due to OS bugs (especially on MacOS) or bugs in third party extensions to the OS open and save dialogs.

  • Why does iPad freeze when I try to publish a video to YouTube?

    When I try to upload a video to youtube from my iPad, the screen freezes when I tap "publish." After several minutes, the YouTube dialog box finally disappears and the preview screen of the video appears with a "Publishing to YouTube" progress bar at the bottom. But the bar never advances and the video never gets published. Does anyone know how to fix? Never had a problem before upgrading to IOS 7.
    Why did Apple screw up what was a perfectly easy way to upload videos?

    First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Why does quiktime freeze when i try to play video?

    I just reformatted my computer and reinstalled windows xp pro...before i had no problem with itunes or quicktime...but now whenever i try to play video through itunes it will freeze and i have to ctrlaltdelete and then cancel...then itunes will close down...when i try to open a video through quicktime the program freezes so i do the ctrlaltdelete then cancel and this time quicktime will play audio but no video...PLEASE HELP!!! i am going crazy, all drivers are installed and updated, i tried to repair and reinstall itunes and quicktime with no success

    I would take a look at the video card driver. The lastest driver for a video card doesn't always mean it is going to be the best one for it or even work without causing problems.
    Example, recently when going to microsoft's OS updates, there were a few updates needed, most security related, one was for the secondary monitor's video card. Well after they were installed, the computer would keep re-starting on its own.
    Well the last change made was updating the video card driver. So I rolled it back in Device Manager, and that solved the problem. This is why I think it is foolish to have a windows computer setup to automatically update.
    The problem your having is difficult to diagnose, more than likely a driver issue. It is not QT because that is only a program.
    Hardware not configured properly will definately cause a freeze when playing mulimedia. Mostly if the jumpers are not setup correctly with master/slave for drives and in the BIOS.
    Why was the OS XP pro reinstalled?

  • Why does Firefox hang when I try to open yahoo? It also hangs after I use it for a little bit.

    When I try to open yahoo Firefox will hang and when I try to restart it will close but stay running. It seems to have started when yahoo went to the new version.I reset my screen resolution to 1152 by 864 pixels like yahoo said no difference. Firefox will also hang if I go to several web sites with out going to yahoo. I changed my home page to Hotmail instead of yahoo and it will open just fine. Any help will be appreciated. Rodney. [email protected]

    Please see the following articles [[Firefox Hangs]] and [[Firefox Crashes]]

  • Why does iTunes freeze when I try to burn cds?

    Hi, when I try to burn cds, iTunes freezes. I have a Sony CD-RW CRX175A and I have been assured by Sony that I'm running the latest firmware.
    I was able to burn cds no problem two weeks ago. Then I removed an external hard drive and then plugged it back in later. To do this, I clicked an icon in the toolbar entitled "Safely Remove Hardware" and I'm wondering if I "removed" my cd burner or something. This is the only thing I can think of.
    Regardless of what I wrote above, can anyone help me? I teach dance and not being able to burn cds in iTunes is making life difficult. THANK YOU!!!
    Here's the CD Diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    MSI MS-6380E
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PxHelp20 (2.0.0.0), AFS2K (3.1.20.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce4 MX 440\GeForce4 MX 440
    IDE\DiskMAXTOR6L020J1_________________________A93.0500, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskHP_____psc_2410_______1.00, Bus Type USB
    USBSTOR\DiskMaxtor4G120J6_________GAK8, Bus Type USB
    IDE\CdRom52XCD-ROM______________________________1.5C___, Bus Type ATA, Bus Address [0,0]
    USBSTOR\CdRomSONY___CD-RW__CRX175A_1.0h, Bus Type USB
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
    Current user is administrator.
    D: 52X CD-ROM, Rev 1.5C
    Drive is empty.
    G: SONY CD-RW CRX175A, Rev 1.0h
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 1 2 4 8 10 12 16.
    The drive CDRW speeds are: 1 2 4 8.
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive on -128(0xffffff80) media at speed 0X.

    bump
    Please help me if you can. Thankfully I can still burn cds no problem with Windows Media Player. For some reason iTunes just can't make it happen. I have tried reinstalling iTunes and I know I have the latest drivers for my cd burner. Any suggestions?
    Thank you,
    Truman

  • Why does idvd quit when i try to add media from iphoto?

    In iDVD, whenever I click Media & then click Photos, it looks like i should be able to select items from iPhoto: But if I click any of the top-level items listed like Events or Photos, iDVD quits/closes without any error messages. This happens in both new & existing iDVD projects (I've never actually used iDVD before today). Also, in iMovie I can ony see older Events & photos in iPhoto when I try to add photos to a project. This makes me think there might be something up with my iPhoto software or its data.
    I'm pretty sure I'm using the latest versions of iDVD & iPhoto from the old iLife ('08) included with my MacBook Pro: iDVD version 7.1.2 (1158), iMovie version 8.0.6 (821), & iPhoto version 8.1.2 (424), running on Mac OS X version 10.6.8. I assume the Apple Software Update app automatically installed whatever updates I have over the versions that shipped with my computer.

    Try this basic troubleshooting fix :
    1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete IDVD'S cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iDVD folder. 
    Click to view full size
    3 - launch IDVD and try again.
    OT

  • Why does Indesign CS4 stall on my Mac Pro with Snow Leopard as soon as I load a file?

    I recently bought a Mac Pro (operating system: Snow Leopard) and installed the latest versions of Photoshop and InDesign (both CS4). I also installed those programmes on my older MacBook Pro with the former (Leopard) operating system.
    Photoshop works just fine on the Mac Pro, with the machine's new Snow Leopard operating system. However, there is a problem with InDesign. Everytime I open a file, even opening a new file, the programme is stalling and I have to force-stop it.
    Does anyone out there in the Adobe Community have a similar problem and could suggest a solution?
    Looking thankfully forward to interesting replies!  Emil

    I first installed the next to last version; the problem appeared there
    (programme stalling as soon as a document is opened). I then updated to
    6.04, hoping for a solution, but the problem remained unresolved. I still
    cannot open a document without stalling InDesign. When installing InDesign
    in my MacBook Pro (which runs Leopard), the problem does not arise. I am
    able to open documents there and work as usual. The operative system was
    installed by the supplier of the machine. Since I was not able to access it
    (Password issues), I reinstalled it by booting the MacPro from the disquette
    that was delivered together with the machine.
    HELP! I am getting desparate!

  • Firefox 3.6.9 crashes when I try to print with no msg, err or anything

    I have a Dual 1.25 GHz PowerPC G4 (tower) running Mac OS X version 10.5.8 and firefox 3.6.9 - everything appears normal until I try to print and then window, firefox, everything just disappears

    good question -just tried it with Safari and it worked fine - what would be different that would cause the problem
    How do I run firefox in Safe Mode?

Maybe you are looking for

  • How do I change my settings.  Dollars to £'s

    How do I change my settings so that the £ stirling balance sheets I am asking to be converted to PDF are not transposed into dollars?  At the moment this is happening

  • I can't compile packages created by NetBeans

    Hello guys for the previous weeks, I was developing my project using Notepad for editing, and javac from the command prompt. Recently I moved my work into NetBeans 3.6, and i modified my code greatly, by arranging my java files into packages and I th

  • Proto won't let me e-mail wireframes to myself.

    Is this a bug or am I doing something wrong? I am logged into My Account, yet the Email/Share button pops up a window that says "Email wireframe(s) as Zipped HTML files through your native e-mail application" and gives me two options 'Cancel' or 'Ema

  • I think a trojan virus has infected my iMac. How can I remove it?

    My iMac has been acting weirdly opening new tabs on my internet explorer (usually betting or **** stuff). I have downloaded ClamXav and ran a few scans but nothing other than finding emails with the virus (which I have obviously deleted). Now one on

  • [SOLVED] EeePC 1001PXD, ALSA - no sound after installation

    After Installation I Installed first Pulseaudio, then ALSA, but still I have no sound. Arch is up to date. I checked sound in Mint, so it isn't hardware problem. Drivers seem to be ok, I also unmuted all channels in alsamixer. speaker-test doesn't pr