Why does internet slow or stop when bluetooth is on?

I've recently started using a bluetooth headset so have been leaving bluethooth on. But I noticed 3G (AT&T) Internet is sometimes VERY slow, almost unusable. I never had this problem before. If I turn off bluetooth and restart the phone, internet is back to normal most of the time. Wifi is not affected.
Note I am not trying to do tethering or anything like that.
iPhone 4s, 5.01, 5gig available, Data usage at 28 or 31 days is 850mb of unlimited.
The signal bars are almost always full 5 bars with the 3G lit but very poor service. This morning it is working fine with bluetooth turned off.
Anyone have any suggestions as to what I might do to fix this (besides leaving the bluetooth off) ;-)
Thanks.
Scotty

I tried all the suggestions... at this point I have wireles and bluetooth turned off. After I restart I'll only start facebook app or browser to a few sites (yahoo, google, etc.) and the throughput seems to be all over the place.
Facebook will error out, then work fine. I'm having trouble coming up with clues as to why this would all of the sudden start happening.
Is it possible I'm being throttled?
Thanks to everyone for your comments.

Similar Messages

Why does Internet Sharing Turn off when shut down/restart ?

I've have had my Mac for a few months now and it has gone beyond my expentation it was defenatly a good buy . I was wondering if there is a way to keep Internet sharing on when I shutdown or restart my Macit would stop working. Ive went to bestbuy and tried this out in other macs and the same thing happened when I restart or shut it. Internet sharing would say it is enabled in preferences, but it no longer has the arrow point up. Apple could you please fix this on your next update I use this as a wireless router and it performes well except when I have to uncheck the box enable it again . Thank you

http://docs.info.apple.com/article.html?path=Mac/10.6/en/8156.html
Your computer has to be ON to be able to use the Internet Sharing settings....

Why does this program not stop when not highlighted.

When I highlight the execution of this program it runs through and stops. However when I take off the highlight then the program does not quit running. I have encountered this problem on other programs as well. What causes it?
Attachments:
isotonic.vi ‏180 KB

Hello,
Thank you for contacting National Instruments.
I took a look at your VI. I think the problem may be that you are using a Continue if True loop condition in your first While Loop. If you press the stop button wired to this condition or if an error is generated in your VI, that first loop will continue to run indefinitely. Try right clicking the loop conditional and changing it to Stop if True. You may then need to change your Less? function to a Greater? function within that same loop to preserve the intended behavior of your program
I hope this solves your problem. If not, let me know.
Matthew C
Applications Engineer
National Instruments

Why does my iPad mini stop responding to wifi after a period of time?

Why does my iPad mini stop responding to wifi after a period of time?
For example, I can connect to wifi and use Safari and my iPad's interet capabilities with no problem. But if I then leave my iPad alone for an hour - when I go back to using it, it still shows as being connected to the wifi, but is unresponsive - i.e. web pages will not load etc. - I have to disconnect and reconnect to the wifi to make it responsive.
In advance, thanks

Try #5
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why does my screen turn black when I play iTunes while working on iPhoto?

Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
Jan

That was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report:          1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
      Kernel Extensions in backtrace:
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver    13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleBluetoothMultitouch    70.12
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMikeyDriver    2.2.5a5
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AGPM    100.12.75
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.GeForce    7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBCardReader    3.0.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AirPort.Atheros40    505.67.1
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.nvenet    2.0.17
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleUSBOHCI    5.1.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleMultitouchDriver    231.4
com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.nvidia.nv50hal    7.3.2
com.apple.NVDAResman    7.3.2
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.NVSMU    2.2.9
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6

TS3700 why does my ipod suddenly stop playing

Why does my ipod suddenly stop playing?

is your battery charged? How many songs do you have on the playlist (if you are playing a playlist when it stops)? I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Why does my macbook pro stop loading the webpage every time i try to access netflix or youtube?

Why does my macbook pro stop loading the webpage (in safari) every time I try to access netflix or youtube?

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Why does Safari go into limbo when I try to search for some things?

     Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
    If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
having with Safari since I installed Yosemite.
     Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
     Any help or suggestions would be great
     Ron

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my ipod classic stop playing after a few songs?

why does my ipod classic stop playing after just a few songs?

is your battery charged? How many songs do you have on the playlist (if you are playing a playlist when it stops)? I know that when the earbud wires are accidentally disconnected from the ipod body, the music stops automatically.

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import pdf?

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import single pdf or multiple pdfs? frequently happens(2/3 times)

Can you provide any more information about the files that are causing the problems? Are these particularly large files? Many pages or images? Have you opened these files in Photoshop CS5, or other versions of Photoshop?
What do you see when you try to import these PDFs? Do you get the PDF Import dialog, allowing you to select pages or images from the PDF? Is so, is it hanging when you click OK or at another time?
Any more details about the problem or other info (as well as sample files) you can provide, the easier it will be for us to help identify the cause of your problems.
Paul

Why does google start up but when i try to access a web page it shuts off

why does google start up but when i try to access a web page it shuts off

Not entirely sure what you mean, but if you are saying that the Safari screen is frozen/inactive then try clearing its cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Why does an unknown error occur when I try to save a document as a word file?

why does an unknown error occur when I try to save a document as a Word file?

Hi Judy,
Deleting the Preferences files seems to be missing from your list.
Quit AppleWorks,
In the Finder, go to:
username > Library > Preferences
In the Preferences folder:
Locate and Delete the File com.apple.appleworks.plist
Locate and Open the Folder AppleWorks
In the AppleWorks folder, delete the following files:
AppleWorks 6 Assistants Cache
AppleWorks 6 Preferences
AppleWorks 6 Translators Cache
Optional:
AppleWorks Button Bars
This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
Regards,
Barry

Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

Why does my macbook shut down when I am watching a film using airplay on apple TV?

why does my macbook shut down when I am watching a film using airplay on apple TV?

It appears to shut down and all the open programmes are closed

Why does internet slow or stop when bluetooth is on?

Similar Messages

Maybe you are looking for