Why does ios 5.1.1 changes my modem firmwire?

After updating my iphone 4 to 5.1.1..i notice that it changes my firmwire. is it suppose to be like that? its 4.12.01 now.. =(

The only reason you could possibly care about this is if you have or want to jailbreak your phone.

Similar Messages

Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

Now correct me if I'm wrong but I am sure I have read that the parallax effect in iOS 7 is the main reason behind wallpapers not being able to be shrunk. However, even disabling the effect will not allow you to resize the pictures like you could in previous versions of iOS, so as Skydiver119 said, it kind of is a glitch. If you are like me, and don't regularly change your wallpaper, then it may be worth creating a photoshop document which is slightly larger than your screen resolution(400px in each direction or so) and then placing your picture to suit, before copying it your device. Obviously, this would not be ideal if you were changing your wallpaper daily or very regularly as it would be a bit of a hassle having to do this every time you wanted to change your wallpaper.
Hope this Helps!

Why does my wi-fi keep changing channels

why does my wi-fi keep changing channels?

the channel is chosen by the WiFi router. If you don't want changes for whatever reason, set it in the router as manual and set the channel you want.

Why does the "Computer Name" sometimes change?

                Not a big deal, just curious, why does the "computer name" sometimes change?
                 The name will be the same, but it will add a number....2,3,4...I always change it back so it doesn't have a numeric value next to it, but just wondering why it happens.
                                        Thanks.

Can also occur after your computer is put to sleep and then wakes back up or after your computer is force quit and immediately restarted. Sometimes the router 'believes' the computer is still connected when it actually isn't. When that computer re-establishes a connection the router 'tells' the computer that a computer with that name already exists so it has to change its name. By default a computer running MacOS adds a number (or increments its number) when this happens.

Why does the fire fox page change, sometimes it is just an orange fire fox button and othr times it says file, edit, view History, bookmarks, tools, help? I barely learn how to run one version of the page and then it changes

Why does the fire fox page change, sometimes it is just an orange fire fox button on the top left that opens a panel with all the things listed in it and then it sometimes has a bar across the top that says File, Edit, View, History, bookmarks, tools, Help? I barely get used to using one type of set up and then it changes to the other without me doing anything??

[[Menu bar is missing]] and [[Preferences are not saved]] may help to you

Why does the Date Created metadata change when images are exported?How do I stop it from changing?

why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.

I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

Why does mozilla wants to make changes to my laptop settings while I try to download firefox 3.6 ?

Why does mozilla wants to make changes to my laptop settings while I try to download firefox

If you install a program then elevated (Administrator) permissions are needed and Windows will ask you to confirm.
If it happens all the time if you start a program then you need to check the Compatibility tab in the Properties of the shortcut via the right-click context menu and make sure that Privilege Level: "Run this program as Administrator" is not selected.

Why does iOS 5.0.1 always say, my iCloud Password is incorrect, when i try to use my iCloud email account?

Why does iOS 5.0.1 always say, my iCloud Password is incorrect, when i try to use my iCloud email account?
Btw: The password works in all other issues.

I GOT IT !
JUST BE SURE UR DESCRIPTION IS NOT (f.E.) iCloud OR SO ON.
THE DESCRIPTION MUST BE JUST LIKE UR EMAIL NAME !!!
IF U GOT "[email protected]" => UR DESCRPTION MUST READ "MY-NAME"
This is how it worked for me, so ...
... just hope it help´s
greez

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Why does my default calendar keep changing?

Periodically with no apparent end user intervention my default calendar selection changes. One is an Exchange based calendar and one Gmail.
Yes, I can change it back, but why does it randomly change in the first place?

Changing into what? You need to give more information about the problem.
How are you connected to the net, describe what's happening. Hopefully then somebody might have some ideas.

Why does an Inbound IDoc no change and differs from an Outbound IDoc no?

Hi Experts,
This seems to be a basic question..! But can someone kindly clarify why an IDoc number gets changed when sent from one R/3 system to another R/3 system and how does this happen???
i.e., whenever an IDoc was triggered from R/3 system A to R/3 system B through XI/PI, the Inbound IDoc number (in system B) differs from the Outbound IDoc number (in system A)... Why does this happen and how???
Thanks in advance!
Br,
G@nesh

Hi Ganesh,
The IDOC numbers are always Unique,
IDOC can be generated in SAP system as a result of internal testing (WE19), or
can be posted from a non sap system (say PI).
So every time a new IDOC comes, it is assigned a new number to avoid confusion and also this plays a
critical role in the end to end testing and validation.
If you look at the control record of the IDOC you can see a element called DOCNUM. this stores to actual IDOC number.
from PI side you can use IDX5 and in ECC We02/05 to notice the idoc numbers.
Regards,
Srinivas

Why does my sg 200 keeps changing port mirror destination to g1

On my sg 200-8 I have 1 port mirror session, with destination set to g4. If I disable, then enable, it changes the port to g1 and g4 is not among the ones I can choose. How do I re-enable it, without having to delete it and create a new one. And why does it keep changing it to g1?

Thanks Thomas. I think I was looking at it wrong regarding the SG switch saying that access mode ports do not tag traffic. It looks like it's from the viewpoint of how the ingress traffic looks. So, a port in access mode assumes that traffic coming in is untagged. Once that traffic ingresses into the port it is then tagged with the VLAN specified for that port. Does this sound right? It's just confusing how the SG switches describe the access mode ports as the PVID being untagged, when it actually is being tagged after data ingresses into the port.
By the way, the layer 3 device is an ASA 5510, which is also performing DHCP for the VLAN.
As you mentioned, I think my core issue is the upstream trunking configuration, which I'm looking into.
Thanks for your help,
Logan

Why does paintbrush size and tools change with zooming?

Why does the paintbrush tool change sizes when zooming in and out? It's so annoying. Is there a way to fix this? Btw I use version CS4. Does it happen to all the other tools? I tried them it seems not but I can't tell unless it's a big difference in brush size like the paintbrush tool. Thanks for any help!

I was going to answer the same Rob, but then I tried it and found that it doesn't do that. If I draw a stroke with the paintbrush and then zoom in, the brush remains the same size and if I draw another stroke it is thinner than the first and so on as you zoom in further.
I think that is what the OP is asking about... since the paint brush is not working with lines, the thickness of the stroke probably is not treated a a pixel-based property, more as a fill, so the thickness of the stroke does change on the stage relative to the coordinate system, getting thinner as you zoom in, but the tool/stroke itself stays the same size to the user -- meaning... if it looks like it's 1/4 inch thick relative to holding a ruler to the screen, you will see it as being 1/4" thick on your screen regardless of the zoom factor.

Why does my wi-fi keep changing

why does my wi-fi keep changing

Changing into what? You need to give more information about the problem.
How are you connected to the net, describe what's happening. Hopefully then somebody might have some ideas.

Why does iOS 7 order tv shows alphabetically instead of by episode

After upgrading to ios7 all my tv series under tv shows are ordered alphabetically, but I want them
listed by episode number like it was in ios6.does anyone know how to change this?

I know it's a lame workaround, but what I do is unsync TV shows to remove them from the device. Then once I verify they're not on the device, I re-check the box and re-sync them to the device. I've noticed they only go out of correct order if I just add a new season of a show or add something new. But then I unsync and resync my shows. I'm really hoping they fix this with a .0.1 update.... It's been annoying all through the betas.
for the record, for sorting I've always done "Community" (for example) for the Artist and "Community Season 3" for the Album

Why does ios 5.1.1 changes my modem firmwire?

Similar Messages

Maybe you are looking for