Why does iphone not light up when connected to power ?

The power lock button on my iphone 5 is broken. I turned it off using assist feature. Now when I connect the phone through cable to the wall charger, it does not light up. I know the battery was about 70% when I turned it off. Any clues ?

Hi 008635ar,
If you are having issues with charging your iPhone I would suggest that you troubleshoot using the steps in this article - 
iPhone and iPod touch: Charging the battery
Thanks for using Apple Support Communities.
Best,
Brett L 

Similar Messages

  • Satellite L650-12Z: Led does not light up when connected to power source

    My L650 does not show the white light anymore when the cable is plugged in.
    The connectors are clean, and the adapter is working.
    The laptop does still run on the battery ( when there was still power in it).
    Also without the battery, there is no white light indicating that the laptop is connected to the DC.
    Does anyone know what the problem could be and how to solve it?

    Thanks for your reply.
    Unfortunately the battery does not charge when connected.
    Only when connected with the full battery it is working.
    I have measured the adapter with my multimeter and it seems to be working properly.
    Like you said, letting a technician look at it would be a smart idea.
    I decided to send it to a service center in my city, in about 4 weeks I would have the notebook back they said.
    Weird thing for me still is, that around three weeks ago the same happened. Windows said the power was not connected. But after plugging the power in and out a few times it worked again. Maybe this is a symptom of something?

  • HT1848 How do I sync my music on my computer to my iPhone - why does this not happen automatically when I connect?

    How do I sync my music on my computer to my iPhone - why does this not happen automatically when I connect?

    Do you have iTunes set to sync music to the device?
    Have you read the User's Guide that explains how to use the device?
    Syncing media and content to iDevices

  • Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

  • My MacBook Pro will not powerup (even when connected to power supply).

    My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.

    Hi PatB11902,
    Thank you for visiting Apple Support Communities.
    If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
    There are several steps that can help troubleshoot this behavior, found at this link:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Start with these steps:
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Start up in Safe Mode.
    If your Mac does not start up normally after these steps, here are some additional tips that can help:
    Troubleshooting: My computer won't turn on - Apple Support
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Sincerely,
    Jeremy

  • Ipod does not light up when connected to PC.

    My ipod used to light up when you touched the clickwheel when it is plugged into my computer, but ever since it showed a folder with a exclamation point (which i fixed) it does not light up when it is touched on the clickwheel anymore. I have restored it a coupple times and my ipod is up to date (1.1.1), does anyone know why it is doing this?

    Does anyone know?

  • Why does iPhone not update photos

    Does anyone know why iPhone will not update from PC using latest iTunes?

    Thank you so much for your reply.I solved the problem after fretting over it for some time. A filter was not turned off and once I turned it off all was well. Live and learn.
    Thank you kindly ,
    nihonbashi
    Date: Sun, 10 Nov 2013 08:54:35 -0800
    From: [email protected]
    To: [email protected]
    Subject: why does lightroom not display photos ?
        Re: why does lightroom not display photos ?
        created by F. McLion in Photoshop Lightroom - View the full discussion
    Does it show an image count on the folders in the folder panel?
    What does show if you select a folder in library?
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5830261#5830261
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5830261#5830261
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5830261#5830261. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Lightroom at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Why does the amber light blink when the wifi is working

    Why does the amber light blink on the airport extreme when the wifi seems to be working?

    The AirPort Extreme has a message for you. To see it, open AirPort Utility and click directly on the amber dot.
    What does the message say?

  • Why does iphone not always pick up signal in new city?

    I just flew to Vegas, Phoenix and Atlanta. Each time, iphone did not acquire signal on landing for minutes (at least), but immediately picked it up when I powered down and powered back on. What is the technical reason for this, and why does turning the phone off and on help to re-establish connection? I realize this issue is not unique to iphones, but I've never understood why it happens.

    palmerimoots,
    Whether or not GSM signals from any cellular phone will cause a plan to crash is not the point. The point is the FAA requires devices that have not been certified by the FAA not radiate in any radio frequency. Airplane mode was designed to comply with those rules and regulations. I don't have confirmation, but comparing my battery life on a trip this last week to my mothers to back in late July the iPhone seemed to have better battery life in a No Service area. I personally suspect that after being in a No Service area for a while the iPhone will stop searching as frequently. When you power off the iPhone or put it in Airplane mode for a few minutes and then come out of Airplane mode the iPhone will search for signal.
    There is a limited waiver in place for WiFi for some airlines that are experimenting with offering WiFi, but that does not extend to the GSM frequencies.
    Hope this helps,
    Nathan C.

  • Why does Illustrator not remember filepaths when saving ??

    Hi,
    I'm finding it really frustrating that Illustrator 10 (on iMac G5 OS 10.3.9) does not remember filepaths when saving.
    Perhaps I've overlooked a setting somewhere.
    Does anyone know how I can rectify so Illustrator defaults to the last used filepath (as does almost every other program on earth) ??
    I'd be very grateful for any help.
    Thanks in advance.

    Can anyone tell me why this is happening?  Am I not saving this correctly?
    Well, to what format are you saving? The native AI format should always retain layers. Other formats such as EPS or older PDF Levels may indeed enforce flattening. also make sure you are not confusing layers with groups/ objects. There's a crucial difference between the two.
    And even more important, is there any way of restoring the different layers once this has happened?
    Well, you can manually add new layers and drag&drop your objects and groups into the new layers in the layers panel, but if you save it again to the wrong file format, that is wasted effort, so for the life of it make sure you get that figured out first.
    Mylenium

  • Iphone not auto syncing when connected

    i have the auto sync when connected option enabled on itunes, but when i plug my phone in, nothing happens.
    when i launch itunes, then dis- and reconnect the phone, it's fine and syncs everything. ideas? this just started happening.

    I've always had to open iTunes, then plug in phone for it to see it. I've never been able to just plug in my iPhone and watch iTunes get pulled up automatically like with my iPod. I just figured this is normal.

  • Why does 2nd gen iPad flash when connected to charger?

    2nd gen ipad will not charge - instead flashes when connected to charger

    Try giving your iPad a reset. Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again
    You can also try a different charger,cable and outlet and see if they are hte issue.
    Are you trying to charge via USB or plugged into the wall? If via USB, try charging with the included power block plugged into the wall

  • Why does my macbook air work when connected to HDMI but not my iMac

    Hi. I have an HDTV, an HDMI cord, and a HDMI -> thundebolt adapter. I plug this in to my 2013 MBA and it works fine, but when I plug it into my iMac, nothing happens.
    Why?
    Do I need a DVI -> HDMI adapter (I already have one for my dual monitor, so it would only be 5$ for the adapter.
    Thanks for the help .

    2011 imac

  • Why does iphone not show up in itunes

    After i connect my iphone to the computer the iphone-sign does not show in the itunes programme.
    The iphoto pops up, so it recognizes the iphone, but in itunes nothing happens.
    This means i connot syncronize my iphone.
    I tryed to restart imac and phone, nothing....
    Anyone had this problem an now's what to do??
    thanks
    Stephen

    http://support.apple.com/kb/TS1567
    http://www.apple.com/support/iphone/assistant/itunes/#section_1

  • Why does ios 7 automatically update when connected to charger

    I don't want to install ios7 but when I have connected my iphone 5 to the charger it had automatically started to download it, the only way I have found not to download it is to take it off charge, but I need to charge my phone and don't want to update it. How can I charge my phone without updating my phone to ios 7?? Someone please help, thank you

    Full instructions to stop and delete automatic downloads are in my thread:
    https://discussions.apple.com/message/23338719#23338719

Maybe you are looking for

  • How can I find the URL for an iCal calendar in iCloud so I can make a link to it on a web page.

    I have a single iCal calendar that I want people to access through my webpage.  How can I find the URL so that they can view the calendar without having to subscribe to it.  I converted to iCloud from .Mac and I can see that changes to this calendar

  • PDF Portfolio published as a website

    I published my PDF Portfolio as a website instead of linking to the actual PDF. It no longer has the search box in the upper right-hand corner like the PDF version does. How do you search the entire portfolio, or even a section, when it is an html?

  • Performance Tunning - Could anyone please help

    I have a procedure which uses two offensive queries.The currenttime its taking is approximately 2 min in DEV and in PROD 20 min. Target is to reduce time to less than a minute in DEV and max 5 min in PROD. PROBLEM1######################### I think no

  • JMS in JSP!!help!!

    jsp code <%@ page import="javax.naming.*" %> <%@ page import="javax.jms.*" %> <% String queueName = null; Context jndiContext = null; QueueConnectionFactory queueConnectionFactory = null; QueueConnection queueConnection = null; QueueSession queueSess

  • Media browser in Lion Finder?

    Hi,  Updated to Lion and have a question.  I no longer see a media browser(or media section) in the left side of my finder windows. I want to be able to see photos without opening up iPhoto.  I have a "pictures" folder under favorites, but this does