Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
Any suggestions?
Many thanks

Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Similar Messages

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

Home sharing works with one account but not another?

My family has an apple tv, we've been having problems setting up the home sharing and tried everything. We eventually decided to try my brother's apple id instead of my mother's and it worked. So my question is; why does home sharing not work with one id but works with the other? any suggestions to get it to work with my mother's id?

Try resetting the Apple TV. enter your mother's ID again. Then remove her ID on iTunes and re-add it. Then see if it works this time.

RAM Worked in One T30 but Not Another

I have two 1GB sticks of RAM: DDR 333, FDMHGO-04032T
This RAM worked fine in a T30 2366-85U laptop
I put the same RAM in a T30 2366-KU1 laptop and it doesn't work - in either memory slot. The BIOS is 1IET71WW (2.10 ) 06/16/2006, which is I believe the latest BIOS for this laptop. The 2366-85U laptop no longer works, I dropped something on the keyboard and that killed the laptop, so I can't check it for BIOS version.
Is there something I can do to get the two 1gb sticks of RAM working in the 2366-KU1 laptop?
Not sure if RAM can be damaged, but could it have been damaged when the other laptop died?
Solved!
Go to Solution.

Welcome to the forum!
The RAM sticks in question should work in any T30 with no issues.
Having said that, have you tried different RAM in 2366-KU1?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Identical actionscript works in one frame but not another...?

Hi all,
I'm working on this electronic sheep creator for my Masters
degree (don't ask haha..) which is online at
[url]www.aegreen.co.uk/creativetech/[/url] . The problem I'm having
is that a piece of actionscript I'm using for saving the sheep as a
jpg using BitmapData works in one frame with one movie clip but not
in another frame..
In frame 1 I create two movie clips - mc_modifysheep and
mc_dna:
[CODE]on(release) {
_root.createEmptyMovieClip("mc_modifysheep", 1)
mc_modifysheep._x = 150;
mc_modifysheep._y = 70;
mc_modifysheep.attachMovie("sheep_body", "body", 1, {_x:42,
_y:65});
mc_modifysheep.attachMovie("sheep_head", "head", 2, {_x:0,
_y:0});
mc_modifysheep.attachMovie("sheep_legs", "legs", 3, {_x:77,
_y:215});
_global.bodycolour = "default";
_global.headcolour = "default";
_global.legscolour = "default";
_root.createEmptyMovieClip("mc_dna", 2)
mc_dna._x = 0;
mc_dna._y = 0;
mc_dna.attachMovie("mc_DNA_empty", "DNA empty", 1, {_x:8,
_y:360});
mc_dna.attachMovie("mc_dna_default_default_top", "top", 2,
{_x:45, _y:374});
mc_dna.attachMovie("mc_dna_default_default_right", "right",
3, {_x:65, _y:400});
mc_dna.attachMovie("mc_dna_default_default_left", "left", 4,
{_x:32, _y:401});
gotoandstop(2);
}[/CODE]
the sheep in 'mc_modifysheep' and the dna in 'mc_dna' are
built up over frames 2 and 3 and then in frame 4 the user decides
whether the sheep is given freedom or captivity. If freedom is
chosen then the user is prompted to name their sheep and the movie
clip mc_modifysheep is saved as a jpg on the server using
BitmapData and PHP. If captivity is chosen then the user is
prompted to name the dna and the movie clip mc_dna is meant to be
saved as a jpg on the server but only a white blank jpg is
produced, not what is contained in mc_dna.. I've tried all sorts
but I can't figure out why it's doing this..
Here's the code I'm using, that works, to save the
mc_modifysheep:
[CODE]import flash.display.BitmapData;
btn_freedom.onPress = function() {
freedom();
function freedom() {
snap_sheep = new BitmapData(305, 290);
snap_sheep.draw(mc_modifysheep);
var pixels:Array = new Array();
var w:Number = snap_sheep.width;
var h:Number = snap_sheep.height;
var a:Number = 0;
var sn:String = txt_Freedom.text;
high = 99999;
low = 00000;
ran =
Math.floor(Math.random()*(Number(high)+1-Number(low)))+Number(low);
var rn:Number = ran
var filename:String = dn+sn;
for (var a = 0; a <= w; a++) {
for (var b = 0; b <= h; b++) {
var tmp = snap_sheep.getPixel(a, b).toString(16);
pixels.push(tmp);
var freedomoutput:LoadVars = new LoadVars();
freedomoutput.img = pixels.toString();
freedomoutput.height = h;
freedomoutput.width = w;
freedomoutput.filename_sheep = filename;
freedomoutput.send("save_sheep.php", "_self", "POST");
stop();[/CODE]
and here's the near identical code apart from different
variable/movieclip names I'm using to try and save (but failing)
mc_dna:
[CODE]import flash.display.BitmapData;
btn_capt.onPress = function() {
capt();
function capt() {
snap_dna = new BitmapData(305, 290);
snap_dna.draw(mc_dna);
var pixels:Array = new Array();
var w:Number = snap_dna.width;
var h:Number = snap_dna.height;
var a:Number = 0;
var dn:String = txt_Capt.text;
high = 99999;
low = 00000;
ran =
Math.floor(Math.random()*(Number(high)+1-Number(low)))+Number(low);
var rn:Number = ran
var filename:String = dn+rn;
for (var a = 0; a <= w; a++) {
for (var b = 0; b <= h; b++) {
var tmp = snap_dna.getPixel(a, b).toString(16);
pixels.push(tmp);
var captoutput:LoadVars = new LoadVars();
captoutput.img = pixels.toString();
captoutput.height = h;
captoutput.width = w;
captoutput.filename_dna = filename;
captoutput.send("save_dna.php", "_self", "POST");
stop();[/CODE]
I know it's a problem with the flash and not the PHP as I've
tested for that, definately in the flash. I just don't understand
how the same code can capture mc_modifysheep, but not mc_dna.
argh!!!
If you need to take a look at the FLA file it's up at
[url]www.aegreen.co.uk/creativetech/dohumansdream.fla[/url]
Thanks everyone!!

If you dont find anything specific, a lot of the problems i
encounter like this are because one little thing is spelled wrong.
like it doesnt match whats in your php file, ect. my suggestion,
though a long one, if you know its supposed to work, and theres no
syntax error, re type it, not copy and paste, and just be careful.
keep tripple checking. you might not even find what was spelled
wrong, but it might fix the situation,

Downloading a file via a procedure works in one app but not another

Obviously I've overlooked something. I have this procedure (following). It works in one application that has been running for a couple years. It is called from Column Link with this value #OWNER#.DOWNLOAD_ATTACHED_FILES?p_file=#DOWNLOAD_LINK#
I'm now making a new application and want the same facility but this same procedure gives me a page not found error even though the error page URL looks like: .../apex/GMCTRL.DOWNLOAD_ATTACHED_FILES?p_file=42 which seems to me that it should work correctly. (the row with the value 42 does exist in the DB)
Is there a setting/flag/thing that I have to set to make this work in my new application that I've overlooked? (both are APEX 3.1.1 and oracle 11g)
create or replace PROCEDURE "DOWNLOAD_ATTACHED_FILES" (p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
BEGIN
SELECT MIME_TYPE, RPT_DOCUMENT_BLOB_IMG, RPT_DOCUMENT_FILE_NAME_TX, DBMS_LOB.GETLENGTH(RPT_DOCUMENT_BLOB_IMG)
INTO v_mime, lob_loc,v_file_name,v_length
FROM RPT_DOCUMENT_BLOB
WHERE RPT_DOCUMENT_BLOB_ID = p_file;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: ' || v_length);
htp.p('Content-Disposition: attachment; filename="'||substr(v_file_name,instr(v_file_name,'/')+1)|| '"');
owa_util.http_header_close;
wpg_docload.download_file( Lob_loc );
end download_attached_files;

Hello:
Ensure that
GMCTRL.DOWNLOAD_ATTACHED_FILES is executable by oracle account used by APEX to connect to the database (apex_public_user or anonymous)
GMCTRL.DOWNLOAD_ATTACHED_FILES is included into 'WWV_FLOW_EPG_INCLUDE_MOD_LOCAL' as an authorized procedure. See Re: link can't find a stored procedure
Varad

Video works with one friend but not another?? please HELP!

my ichat video isn't connecting with my friend christina. we've taken turns calling each other and my computer keeps saying "no data has been received in 10 seconds" i can hear the ringing and then when we go to connect thats when the message comes up and cancels the call. at the same exact time my other friend sam was online so to test out my video chat i called her. & it worked. christina also connected with sam separately & that worked. then we tried a conference where all 3 of us could chat, and sam started it and invited both of us. it worked and we could all talk & see each other. however for some reason i can't connect to just christina. what's going on?

Hi,
Welcome to the  Discussions
iChat can have several messages on a failed chat.
The "No Data for 10 Secs" one only appears on chats that connect (even if you don't see the Video)
Basically it point to an issues between iChat at the Internet.
The same Result can be achieved by pulling the Ethernet cable out or turning the Airport card off or powering down the modem or router.
So we have to look at what can produce a similar break in the Internet connection without the drastic steps above.
Some modem and router have "protection" features that will do this.
Denial of Service (DoS) tries to make sure any data that come to your Computer does so at a rate it can handle.
It was originally designed to protect Web Servers from "attacks" where too many requests coming to frequently used to bring servers and their Internet connections to halt.
So Dos is threshold based,. It will cut any port that it thinks there is an "Attack" on.
Video chats can send lots of data.
These thresholds that are preset in the device tend to be set at Web page streaming speeds (allowing for multiple requests on popular servers) - but also at older Internet Speeds.
Modern Speeds and things like iChat Streaming two way Video can mean that certain Buddies can send you data faster than the threshold is set for particularly with iChat 5.
Stateful Packet Inspection (SPI) works differently but can only process a certain amount of data and will cut the port that is causing it to be overloaded making it Threshold based as well.
There is no way to change the thresholds involved so the best course of action is to Disable the feature.
So the Speed Sam has to send you Video may be lower than that of Christine and not bump into the threshold.
If Sam is the Host then it the Speed of that Internet Connection that governs how fast Data is sent to you.
One solution is to cap iChat in iChat > Preferences > Audio/Video Menu to 500kbps on the all Buddies involved.
If this solve the issue between you and Christine then you can move on to your Modem or router.
8:16 PM Sunday; June 6, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)

Constructor works in one place but not another

This is a program related to the game medal of honor. The constructor:
Rcon status = new Rcon("say test", "superman3","213.221.175.132", "29961");
Works from the main class, but where it's positioned in the class below, it doesn't - I'd love to know why!
import java.util.StringTokenizer;
import java.util.Vector;
import java.util.HashMap;
public class Token     {
     String test;
public Token(String a)     {
          String toke = a;
          String s3 = "";
          HashMap hash = new HashMap();
          StringTokenizer tokenizer = new StringTokenizer(toke, "\n");
          while(tokenizer.hasMoreTokens())     {
                         String newString = tokenizer.nextToken();
                         if(newString.startsWith("map:") || newString.startsWith("num") || newString.startsWith("---") || newString.startsWith("print", 5)) {
                              } else     {
                         String s1 = newString;
          String num = s1.substring(0,4).trim();
          String score = s1.substring(4,9).trim();
          String ping = s1.substring(9,15).trim();
          String name = s1.substring(15,31).trim();
          String lastmsg = s1.substring(31,39).trim();
          String address = s1.substring(39,61).trim();
          String portno = "";
          String qport = s1.substring(61,67).trim();
          String rate = s1.substring(67,72).trim();
          try     {
          test = s1.substring(72,73).trim();
                    if(test != null)     {
               System.out.println(name + " your name is too long.\nPlease abbreviate it to less than 15 characters.");
               Rcon status = new Rcon("say test", "superman3","213.221.175.132", "29961");
               status.start();
     }     catch (StringIndexOutOfBoundsException e)     {
          if(test == null)     {
          Vector vector = new Vector();
          StringTokenizer tokens = new StringTokenizer(address,":");
          if(tokens.hasMoreTokens())     {
          address = tokens.nextToken();
          if(tokens.hasMoreTokens())     {
               portno = tokens.nextToken();
          vector.add(num);
          vector.add(score);
          vector.add(ping);
          vector.add(name);
          vector.add(lastmsg);
          vector.add(address);
          vector.add(portno);
          vector.add(qport);
          vector.add(rate);
          hash.put(address,vector);
          System.out.println(hash);

Thanks for the reply.
It doesn't produce an error (probably due to my poor coding!) It's part of one thread and the other one works fine, so the program doesn't exit or anything. There's no GUI at present, it just lets the other thread carry on and this one just stops when it gets to the constructor.
Here's the class if it helps:
import java.io.InputStream;
import java.io.IOException;
import java.net.DatagramPacket;
import java.net.DatagramSocket;
import java.net.InetAddress;
class Rcon {
public int q3que (String msg,byte [] data,String server,Integer port) {
     DatagramSocket ds;
     DatagramPacket dp;
     InetAddress ia;
try {
     ds = new DatagramSocket();
} catch ( java.net.SocketException e) {
System.out.print ("OK, we caught a java.net.SocketException. :'p\n");
     return -1;
try {
     ia = InetAddress.getByName(server);
} catch ( java.net.UnknownHostException e) {
System.out.print ("OK, we caught a java.net.UnknownHostException. :'p\n");
     return -1;
String out = "xxxxx" + msg;
byte [] buff = out.getBytes();
buff[0] = (byte)0xff;
buff[1] = (byte)0xff;
buff[2] = (byte)0xff;
buff[3] = (byte)0xff;
buff[4] = (byte)0x02;
dp = new DatagramPacket(buff, buff.length, ia, port.intValue());
try {
     ds.send(dp);
} catch ( java.io.IOException e) {
System.out.print ("OK, we caught a java.net.java.io.IOException. :'p\n");
     return -1;
return dp.getLength();
public Rcon(String a, String b, String c, String d)     {
     int length;
byte [] buff = new byte[65507];
     String rcon = a;
     String passwd = b;
     String host = c;
     Integer port = new Integer(d);
     length=q3que ("rcon\r" + passwd + "\r" + rcon +"\0",buff,host,port);
     if (length < 0) return;
return;

Flash not working for one user, but not another on this CPU

Hi,
For user A on my computer most video will play in Safari, Firefox, and Chrome. But video at nfl.com will not play. The ads will play but not the actual feature.
I just found out that the videos on nfl.com will work for user B. I have rerun the Adobe Flash 10.1 installer in user A's account several times with no luck.
Are there permissions or libraries I should trash to try to restore this capability?
thanks,
Steve

HI,
For user A on my computer
Try uninstalling the current copy of Flash, reinstall new, then repair permissions.
Uninstall Flash
Install the most recent version of Flash here.
Now repair permissions.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
You may also need to delete the Flash cache. Instructions here.
http://discussions.apple.com/thread.jspa?messageID=11672709&#11672709
If that doesn't help, install the v10.6.4 Combo Update It's ok to do this even though you are already running v10.6.4.
Carolyn

Wireless internet access works on one Mac, but not another

I have a Time Capsule connected via Ethernet to a Linksys ADSL2 gateway.
I have set up a wireless network on the TC, which both Macs (MBP and MB) can see and log on to.
The MacBook can get an internet connection wirelessly, the MBP can't.
The MBP does get an internet connection if connected to the TC via an ethernet cable
I have the connection assistant, but it get as far as asking for my airport password before giving up - I have entered the password correctly.
Any suggestions?
The MBP is running 10.5, the MB 10.4

I have fixed the problem with a reinstall of OS X. Before that, i had tried trashing the keychain, repairing it an also deleting the wireless networks plist. No luck.
Anyway, all OK now...

BusObj XI R2 Deski login error for user - works on one PC but not another

Hi,
I have a user logging into Deski on her PC but getting:
[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Enteprise authentication could not log you on. Please make sure your logon information is correct.(hr=#0x80042902)
If she logs in on my PC her ID/password works just fine.
We reinstalled Deski and cleared any server information but with no difference.
And here's the odd thing.... I can login OK on her PC... so the client looks installed OK.
Any ideas?
Thanks,
Dean

HI Dean,
The issue could be that the user account might have got corrupted.We can delete the user preferences from the registry.
When the user logins to dektopintelligence, it recreates the user information in registry.
Note:Take a backup of the registry of client's PC,before making any changes.
Click on File->Export
Save the registry information.
->Click on Start->Run->regedit
->Select HKEY_CURRENT_USER->Software->Business Objects->Suite 11.5->default->Application Preferences
->Delete Business Objects Reporter.
->Also delete the User Pref (the account with which you have logged into the system).
Now try to test the issue by logging to deski.
Hope the information helps!!
Regards,
Shubha.

Synaptics touchpad on 4540s works for one person but not another

The Synaptics touchpad on my ProBook 4540s (Win 7) works normally when I use it but when my wife tries to use it, the touchpad is unresponsive after a very slight initial cursor movement.  (Anticipating replies - Yes, she casts a shadow, pictures of her come out normally, and she has a visible reflection in a mirror.)     The touchpad sensitivity setting is maxed on light touch and cursor speed is maxed.
She has relatively small hands, and long nails, but she had no difficulty using the touchpad on our old HP dv9910us and has no problem with an iPad touchscreen.  This week she tried the touchpad on a Sony VAIO that was so worn most of the original surface coating is gone, and had no problem moving the cursor on that machine either.   She even tried the awkward solution of using her knuckle instead of her fingertip on the HP in case her nails were getting in the way, but that didn't work either.
Not having used a 4540s before, and not having access to another one to compare, I have no way to tell whether this is a bad individual touchpad unit or a design issue.   If a design issue, what's the workaround?     For instance, is there a skin I can put on the touchpad to increase its conductivity?

A friend of mine bought a ProBook 4540s yesterday. At Microcenter we noticed that the touch pad often would stop working for her, and sometimes for me, but it usually worked for me. She bought the laptop, and we she got it home we noticed the same problem. I played with the touchpad a little and noticed this pad has a very narrow window of operation. With the 14.1" HP's like the nc6220 or nc6400, you can use one finger, two fingers, even three fingers, and the mouse responds nicely. However if too much surface area is in contact with the touchpad of the 4540s it doesn't work. Too much surface area is the pad of your finger. Because my friend has long nails, she was laying her finger pretty flat on the touch pad, and it wouldn't work. When I used the pad like this it wouldn't work for me either. Because I have short finger nails I have always used the lower end of my tip. This works pretty well with the 4540s. Pressure seems to have little affect. It is a matter of surface area, and the acceptable area has a small range!

Application works for one user but not another......Please help

Hi just wondering if anyone can help.
We have an app (get i_player automator) that we have been successfully using for the last year or so. The other day our internet connection died mid download and the app stopped responding.
Rather than force quit darling hubby did something fancy with the terminal window (not entirely sure what but I remember kill, bash and gerlp??).
Anyway since then the app will start appear in the doc (bouncing happily up and down) but no window will open. This happens just on my log in. If I ctrl click the application is listed as not responding.
The app works correctly for other users on the same machine.
I have tried the following to no avail
Turning off and on again
Deleting the app and re installing
Any ideas?

Most applications work user-per-user, maybe your darling has to do some more of that magic in the Terminal on your account?

Safari works for one user but not another on same computer

MacBook with multiple user accounts. Safari (and Firefox) work fine for one user but are unable to open web pages when the other user is logged in. The error in Safar is "Safari can't open the page "http://xxxxxxxxx/" because it could not connect to the server "/xxxxxxx/" . DNS is working for this user. I am able to ping any number of sites from Terminal. Network Preference pane is configured to not require any proxy. This is a case of it was working but now it's not.
Can anybody help with this? I know I can fix this by simply creating another user and transfering the affected user's data to the new account but I would rather not. TIA

HI Bob,
You can test your settings by clicking the big "Test My DNS" button at <https://www.dns-oarc.net/oarc/services/dnsentropy>. If you see "Poor" on any of the tests, don't use that domain name server! Remove it from Apple Menu => System Preferences =>Network =>DNS Servers or similar location in your router if you've got a 'home network'. If all you have is "poor" DNS servers in your list, call your ISP and insist that they give you the address of a name server which is protected against the recently exposed DNS cache-poisoning threat.
Also, open System Preferences/Network. Click the DNS tab. Add these numbers in the DNS Servers box.
208.67.222.222
208.67.220.220
See if that helps.
Carolyn

Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

Similar Messages

Maybe you are looking for