Why does iPhoto start up every time I start the computer. I have not checked any box at shut down.

Why does iPhoto start up every time I start the computer. I have not checked any box at shut down.
Thanks,
Bill

Is it on your Log-In items?
Do you have a disk or device formatted like a camera card attched to your computer - say with a FAT format?

Similar Messages

Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?

Why does my router disconnect every time I sleep the computer? Why did this only start to happen recently?

Actually it does with Ethernet too: http://support.apple.com/kb/HT2412?viewlocale=en_US&locale=en_US
What happens when the Mac goes to sleep (not just into idle mode or display sleep)?
On all Macs:
The microprocessor goes into a low-power mode
Video output is turned off, and a connected display may turn off or enter its own idle state
Apple-supplied hard disks spin down; third-party hard disks may spin down
On portable Macs:
The Ethernet port turns off, if applicable (see note below)
Expansion card slots turn off
The built-in modem, if present, turns off (see note below)
An AirPort card, if present, turns off (see note below)
The USB ports only responds to the power key on an external keyboard (see below)
The optical media drive, if present, spins down
Audio input and output turns off
Keyboard illumination, if a feature of your portable computer, turns off
But see the note about selecting, "Wake For Network Access" in Energy Saver preferences.
Note: Portable computers have no network connectivity when in sleep mode, but can wake if the Energy Saver option "Wake for network access" is enabled. If you wish to use file sharing or don't want to interrupt your Internet connection, you should not manually put the computer to sleep, and you should drag the "Computer sleep" slider to Never.

Why does my safari crash every time I hit the to open another tab?

Every time I hit the + in the upper right hand corner on Safari to open a new tab, it crashes and closes out. This happened after I plugged my iPad into my computer to sync it. Does anyone have an idea what happened. I tried turning the iPad off and back on but that did not fix it.

1. Settings>Safari>Clear History, Cookies and Data
2. Hold the Sleep/Wake and Home button down for about 10 seconds until you see the Apple Logo

Acrobat re-installs at the start-up every time I use the computer

Every time I start a computer Acrobat keeps re-installing.
First I get a message "Preparing to install" from the Windows installer.
Then I get a message "Please wait while Windows configures Adobe Acrobat".
And then I get a message "You must restart your system for the configuration changes made to Adobe Acrobat pro to take take effect. Click yes to re-start or No if you plan to re-start later."
If I click Yes, then after a re-start it all start from the beginning - I get a message "Preparing to install" again...
If I clink NO, I can use the Acrobat Pro, but this message is very annoying.... Also, it takes extra time before I can start using the computer...

Please back up your computer before starting any remedial action. System Restore is not sufficient for any catastrophic problems. First, I do not recommend the use of any 3rd party registry repair software. If you stick to using the original publisher's software to isolate and/or fix any problems you will generally be much better off.
In general, when you see the installer running right after trying to start an application, it means the installation is corrupted. Therefore, that's where I would begin troubleshooting.
After BACKING UP YOUR SYSTEM, I would try the following:
1. Uninstall the application.
2. Clear the Windows logs
3. Disable User Account Control
4. Disable any third party software which might be conflicting.
5. Reboot, if necessary, and then reinstall with Administrator privelages using the following procedure: http://kb2.adobe.com/cps/400/kb400682.html
6. Upload (attach) your log to your next post so other people and I can look at it.
7. Check your Windows Event Log for error messages related to the installation routine. Copy any installation error messages to your post.
I'll take a look at the resulting log for unusual events.

Why does internet options reset every time I start firefox 5.0?

Everytime I restart firefox, it is not able to connect to the internet. The proxy setting in the network settings is set to manual proxy configuration. Even though I set it to auto-detect proxy settings for this network. It does not save the setting. It goes back to manual again when I shut down firefox. And the next time I restart firefox, I have to set it again. This has never happened in previous versions. Started only after I installed 5.0. Am I doing something wrong ??

See: http://kb.mozillazine.org/Unresponsive_Script_Warning
Bear in mind that Firefox 5.0 is still in BETA, so there are bound to be problems with it still.
So do your bit and report the issue using the Feedback option. The full candidate is slated for release on June 21.

Why does my location change every time I start/restart my computer?

I have yahoo weather set to my location. Every time I switch to an other account or start /restart my computer it changes to another location. I follow the "Firefox cure" Yahoo gives for the problem but it continues to do the same . This started about a week ago when I updated Firefox.
The problem is about to drive me nuts.
HELP !!

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''

Why does my screen minimize every time I push the left shift button?

Why does my screen minimize to left top corner every time I push my left shift button?

I would try going into your System Preferences and reset your keyboard settings to the default setting. It is possible that somehow your shift key got bound to something it shouldnt have been.

Why does AI Read(Asynchronous).vi cause the waveform chart to not display any history ?

I trying to create a strip chart for 16 channels that will require displaying 10-20 minutes of data.It also starts a separate vi to set gains and offsets while displaying the data. Using AI Read.vi uses 100% of the CPU so the second vi does not run. But using AI Read (async).vi allows the second vi to run, but causes the waveform chart to not display the history? I'm using LabView version 6.0.2.

Hi Waynes World,
I have a couple of questions that may help us solve this issue...
1) If you are modifying one of our example programs, which one did you start with?
2) What kind of analog input are you doing? Buffered? Finite or continuous?
3) Have you tried increasing the buffer size of the strip chart? This will allow the chart to store more data in it.
4) When you use the Async VI, and when you are using the other, can you describe how the strip chart is showing the data... does the data in the chart keep growing and growing... or does it clear itself and start over when the pine reaches the end?
I think this issue is rooted in how the buffer is being used with the two different AI Reads and how it returns data to the chart.
On a side note, have you considered upgrading to a newer version of LabVIEW? Our latest versions of LabVIEW come with many new features and it is signifigantly easier to use.

Why does my iTunes hang every time when using automatic device detect?

Why does my iTunes hang every time that I connect either of my devices (iTouch-4th Gen, iPod Nano-5th Gen), to my Win 7 (64-bit) PC desktop? By the way, this does not happen if I open iTunes first, and then connect the device. So my workaround was to simply uncheck the checkbox that allows iTunes to start automatically upon device connection. This doesn't fix the problem, but it allows me to synch my device, but it would be nice to be able to have the autodetect work properly, so that iTunes would start normally without locking up on me and freezing. That's what I mean by 'hanging'. My whole computer doesn't freeze--only iTunes.

Hello E
Start with finding the path where the songs are on your PC by right clicking the songs that are missing in iTunes and click Get Info. You should get a window that pops up and in the Summary tab; the path will be there. Then navigate to where it was and see if the files exist. Other than that you can try to search your computer to find those files. Checkout the articles below for tips on finding the missing music, also if some of the tracks are downloaded from the iTunes Store you can download the tracks again by deleting the missing tracks from iTunes and then navigating to the purchases section in the iTunes Store to download them again.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.

Why does system preferences crash every time i try to change the wallpaper?

Why does system preferences crash every time i try to change the wallpaper? Any way to fix or reset the app?

We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
#Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
#Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
Thank you for your cooperation!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going to my pics and getting it back. Does anyone know why this keeps happening??

Every time I turn the computer off or put it in sleep mode... when I come back my wallpaper is gone. I have to keep going back to my pics and getting it back.
Does anyone know why this keeps happening??

Are you choosing it from one of these folders (in my screenshot) or you can also put that picture into the correct folder. The path is:
HD > Library > Desktop Pictures
If you add it to the folder manually, please restart your computer.
And yes, letting it sleep is a good idea, or else the startup disk will spin and the screen may suffer from image persistence if you leave a window or image parked in the same spot too long, so the screensave is a good idea.

Why does Muse crash practically every time I go to place an object?

Why does Muse crash practically every time I go to place an object?

Hello Zak. I am using Adobe Muse CC latest version on an iMac 7 running Yosemite version 10.
I am placing a .jpg photo onto a page at the same size. Sized to fit I mean. This is happening about every 3 to 4 times I do something like asking to Place a file. It is driving be mad.
I attach a screen grab of this all too familiar screen. I have updated to Air 3 also. What is going on, please help.
Thanks.
With kind regards, Richard
Because good design is everyone's business.
ROC Design Killough House, Killough Lower, Kilmacanogue, Bray, Co Wicklow.
Call: 01 2762118 Email: [email protected] Skype: killoughhouse
Web: http://www.rocdesign.ie

Logic asks for my serial number every time I reboot the computer. Anyone know what gives? I restored the program after a hard drive crash and now I need to enter the serial number every time. Why doesn't it remember the code?

After a computer crash I had to reinstall the whole system using Migration Assistant. The User ID is NOT the same as the original computer. And now every time I reboot the computer and load Logic the program asks me to enter my Serial Number with a "Licensing" window. Why can't the copy protection see that I have already done this? Am I missing some Pref file, or is it in the wrong location? The program works fine once I enter in the number and insert my Logic XSKey (from an older update). Thanks.

Hi!
Do you run automap 4.8/4.9? If so, then the chance is that automap is the culprit for slow undos/redos on LPX 10.1. Delete the Novation controller in the LPX controller surfaces. You find it under preferences/controller surfaces. If that is the solution for you, then uninstall automap. You find the uninstaller under applications-automap.
Good luck!

HT4623 Why every time i format my computer i have to ask acess of my iphone to be used by same computer,my unique pc is being considered as third in five authorizations allowed.

Why every time i format my computer i have to ask acess of my iphone to be used by same computer,my unique pc is being considered as third in five authorizations allowed.
Thks for your promptly reply.

Read here about authorizations/de-authorizations:
http://support.apple.com/kb/HT1420
Don't know why you're formatting all the time, but remember to de-authorize BEFORE you format.

HT204407 I updated to the latest IOS (5.1.1) today and since then Find my friends hang at "signing in" hangs during signing in. I can't back up & start over, every time I open the app, it's hanging there. Can I clear this without losing everything?

I updated to the latest IOS (5.1.1) today and since then Find my friends hang at "signing in" hangs during signing in. I can't back up & start over, every time I open the app, it's hanging there. Can I clear this without losing everything, including the friends that have already accepted me?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Why does iPhoto start up every time I start the computer. I have not checked any box at shut down.

Similar Messages

Maybe you are looking for