Why does it appear that photostream is using up space on my devices?

On all of my devices, when I look under the Usage>Photos it shows that there is space being taken up by photostream even though photostream is turned off on all devices and the pictures have been erased. Is it really using space on my device or does it appear that way?

How much is being used?
Id significant:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings      
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:                                 
iOS: How to back up           
- Restore to factory settings/new iOS device.

Similar Messages

  • Why does Apple say that I`m using 5 computers whilst I only have two?

    Hello! I`ve got a problem with iTunes. I usually use iTunes on my MacBook Pro. Today I installed it on my PC and entered my Apple ID. After that I got a message from Apple saying that I am using 5! computer - and I sure am not as I only have two ( My XP laptop has given up a long time ago - it doesn`t exist anymore. Got no iPhone, no iPad either). Can anyone tell me what`s going wrong here?

    Some of your computers may have been (or still may be) using multiple authorisations.
    Perhaps try doing a "Deauthorise all" and then reauthorise the computers you still have access to? (That should get you back down to 2 authorisations.) See the following document for instructions:
    iTunes Store: About authorization and deauthorization

  • Why does itunes say my ipod is using less space than what is being used.

    When my ipod is plugged in my pc while running itunes, I click the ipod icon in the source menu. Near the bottom of the itunes window it says how much free space and used space there is availiable on the ipod. Well, mine reads that I have 24.70 gigs free space but the used space is only 3.12 gigs and there is a little lock near where it say's free space. I dunno why it say's that or how to change it. Please help.

    If talking about 30 GB
    Advertised GBs are calculated as 100010001000
    A computer counts a GB as 102410241024 instead
    There is also space used by iPod itself (file system etc.)

  • Why does it appear that mi ipad mini Appleid is now in use and I can not activate iMessage or FaceTime?

    When I try yo activate my Apple id for face time or iMessage I can not do ir. It says that the Apple id is now in use, ADN that its imposible yo validate.

    Is it possible the you are mistakenly trying to create a new account using the existing ID?  That would result in the error you describe. 
    Tell us exacly what you are doing to activate your ID for facetime or iMessage.  What is the process?

  • I tried to install Quick&Clean per your Email to me, and after following instructions, why does it appear that this has not been added?

    Mozilla tells me I have the latest update, but no matter what I try, the Quick&Clean feature you offered will not install in my browser with the TP icon. What can I do?

    Quick&Clean feature? We do not provide support by email. It most like was a marketing email if you subscribe to their email list.

  • I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer.

    I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer

    What print and paper sizes are you using?  Are you trying to print a borderless print?  Does your printer support borderless for that particular size?  Are you printing to the custom stock size or to a larger stock size?
    OT

  • When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    Does it always happen at the same time during the export?
    Can you play through the entire Sequence in FCE without any problems?
    What are your Sequence settings in FCE>
    Have you rendered fully prior to exporting?
    Which export settings did you use?
    -DH

  • HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

    I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

    Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
    It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

  • Why does it say headphones when i use the volume buttons

    why does it say headphones when i use the volume buttons instead of volume when the headphones are not plucked in?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • Why does "nobr" appear?

    <p>When I post a message and include both code and a link, I often get a &#91;nobr] at the top, and &#91;/nobr] at the bottom.
    <p>Adding this link:
    Why does "nobr" appear?
    trying a line of code<p>Now, note the "nobr" top and bottom. I did not put them there. It appears that if I mix ubb tags (with the &#91;] brackets) and html tags (with the &lt;> characters), the offending nobr shows up.
    <p>What is it?
    <p>And what can I do to prevent it?
    <p>Thanks in advance.

    Just a test...
    Adding this link:
    Why does "nobr" appear?
    trying a line of codeHmmmm... I see that if I use UBB tags for the link as in: &#91;url=http...]Link title&#91;/url], then the nobr goes away.
    So now the question is... is there any place this stuff is documented?

  • The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it.  After looking in the app store it does not appear that said application is available for re-downloading.

    The application called VirusScan that comes preloaded on the macbook will no longer open, claiming that it is corrupt and that I must reinstall it.  After looking in the app store it does not appear that said application is available for re-downloading. Is there a special, non-app store place where I am to go for this?
    Also, I installed MacKeeper about two-three months ago and am questioning its performance. Looking for input as to whether or not this application helps or hinders my system.

    I'll back up Csound on the MacKeeper thing.  In fact, I actually wrote the following about it:
    http://www.reedcorner.net/news.php/?p=245
    Remove is ASAP.  Do not use the provided uninstalled, as there are widespread reports of pop-ups advertising MacKeeper on your system after incompletely removing it.  Try this:
    http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
    As for VirusScan, Barney is right on the money that it does not come preinstalled on any Mac shipped new from Apple.  However you have gotten it, your best bet is removing it.  See my Mac Malware Guide for more information that will help you understand and avoid Mac malware without relying on anti-virus software.
    http://www.reedcorner.net/guides/macvirus
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8?

    Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8? I had an older version of Firefox and it said I needed to update it but that was the message that appeared.

    Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
    There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
    http://www.floodgap.com/software/tenfourfox/

  • Why does 'User not registered for online use' show up when I try to import a cd into itunes. None of the cd info shows up either

    Why does 'User not registered for online use' show up when I try to import a cd into itunes? None of the cd info shows up either.

    Well, the format I upload from the camera is "video clip" or "video for Windows"...sometimes I've converted them to avi format, too. But as I said, it never even lets me get that far...I never get to even select a clip. As soon as I tell the program to "import/clip" it freezes up before I can even go to the folder that the clips are in. It has only begun to do this recently, and I'd never had any problems like this before. Last night I tried it again, and I clicked "open composition", and it froze when I did that too.
    I'm not sure how much more specific I can be about the details of the clips, since I'm positive it has nothing to do with the clips themselves...I'm running Windows XP, though...Home Edition Service Pack 2, Pentium 4 CPU 2.80GHz, with 504 MB of RAM. I have had the automatic updates turned on since I did my last reformat a couple of weeks ago. Could it have something to do with some kind of an update it may have done?

  • TS1292 My pin number had been already use? I bought a $10 card and it appears that has been used. How can i solve this?

    Hi!!
    My pin number had been already use? I bought a $10 pin number and it appears that has been used.
    How can i solve this?
    I already speak with a representative of the provider company and they told me to contact Itunes or apple to solve this.
    Help me please!!
    I cant neither pay with my Master card debit and now with a pin.

    From where did you buy this "PIN"? And did you get an actual card, or did they just send you a number? If you got only a number, then you may well have been defrauded. You'll need to go back to whoever sold you this "PIN" to resolve the problem. Apple to the best of my knowledge does not authorize any company to provide codes rather than a physical card and hence probably cannot help you if you did not get a physical iTunes card or receive a gift certificate issued by the iTunes Store themselves.
    Regards.

  • Why does border appear around embedded video?

    Hello,
    I have an embedded YouTube video in a page on my site. It was working fine for a while but I've just discovered that there is now a black edge showing on the left, right and bottom of the video? I created a white round cornered frame within Premier so that it's part of the video. I did this as the pgae it's embedded in is white so that when it plays back it appears seamless and with curved edges to match it's container. This worked fine for a week or so but now it has these black edges? Can anybody tell me why? You can see for yourself at www.glovesanddoves.com. Go to the fighters page and you'll see the video at the bottom. The video's width is a multiple of 16 and the ratio is 16:9 at 384px X 216px. The containg Divs are also set to these measurements.
    I've attached a screenshot below:
    Any help would be much appreciated.
    Jack

    It only seems to be affecting the page when viewed in Safari although it was working fine for over a week before today?
    Date: Thu, 11 Oct 2012 16:39:47 -0600
    From: [email protected]
    To: [email protected]
    Subject: Why does border appear around embedded video?
        Re: Why does border appear around embedded video?
        created by Ken Binney in Dreamweaver General - View the full discussion
    No prob in FF 15.0.1or IE 8  on PC - Rounded corners boxes on both
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4767926#4767926
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4767926#4767926
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4767926#4767926. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Dreamweaver General by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for

  • BAPI for create IR and GR

    Hi All, I would like to use the BAPI to create the IR and GR. But i don't know which BAPI is use for create the IR and GR . Could you mind give any information about this? Regards, Luke

  • Cannot find file... Can not back up

    I am just trying to back up purchased items from Itunes, and I keep getting a error: Some files can not be burned to a data disk. Do you still want to burn the remainder of the playlist? - and it can't find 13 songs I've purchased. I tried adding the

  • Can any one tell me how to send one PO to mutilple mail ids in vendor maste

    Hi Experts, Can any one tell me how to send one PO as a mail to multiple vendors who are all maintained in my vendor master record Suppose I have 3 mail ids in my Vendor master record and I created a PO with that vendor, will that PO goes to all the

  • MSBuild not working for .dtproj

    HI, I'm trying to do an ssis project deployment to ssisdb catalog using MSBuild and it was executing fine with a warning message saying .dtproj not supported by build so couldn't deploy it. When i look at the catalog i don't see any packages getting

  • Pro's and con's of creating an entire web page with Edge?

    I was just curious if anyone else had thought about this? along this line of thinking, I noticed that in hte preview versions of Edge, you added the "text" of the animation directly into the web page your animation was in.  Now, it is all kept outsid