Why does it need a click to start slide

Hi,  I have a presentation with about 20 slides in it.   Slide 5 has 5 objects on it with a build out on the last object which works perfectly.   Slide 6 has a Build In on it, set to After Transition and 0 seconds delay.    However this slide will not start unless I click.    Can anyone tell me why please?
Thanks
Alex

I would guess the transition for this slide is set to "on click":
Inspector > Animate > Start Transition; click on the drop down menu and change to Automatically

Similar Messages

  • Why does Bridge Need Illustrator to Save as PDF compatible file?

    1. Why does Bridge need Illustrator files to be saved as PDF files? "PDF Compatible File" ticked in the save menu.
    2. Why does saving with this info take so long, even on decent fast modern systems?
    3. Why does Bridge not consistently render the Illustrator files in FULL RESOLUTIONS, seemingly shooting for half resolution much of the time, and simply stopping at that?
    4. Why does "clicking" on the preview inside Bridge bring up the full resolution?
    5. How do I shortcut this process so that every file is previewed in Full RESOLUTION, instantly?
    What is the point of Bridge?  What's its reason for existence?
    First time user of Bridge.

    Since someone is bound to say that this should be asked in the Bridge section... it already is.  And has been referenced back over here.
    You can find it here:
    http://forums.adobe.com/message/5655632#5655632
    Answer wherever you see fit, if you're up to the task of dealing with someone attempting to have a broader view, perhaps also suffering from somewhat objective analysis that sometimes contains direct criticism of the way Adobe does things.

  • HT201250 If time machine backups hourly.  Why does it need to backup daily, weekly and monthly

    If time machine backups hourly.  Then why does it need to backup daily, seekly, and monthly?

    It doesn't.
    What it does is discard intermediate backups at the end of 24 hrs and keep just three spaced backups from the previous day.
    At the end of the next day, that day's will be reduced to 3, and the previous 3 trimmed to one; the last backup of that day.
    Daily backups are kept for a month, then trimmed to the last backup of the week.
    The weekly backups are kept until the disc runs out of space and TM starts deleting the oldest ones.

  • Why does m4v need to be converted again

    Hi. I converted a dvd movie I bought into the ipod format .m4v using another converting software program I have. I then imported it into the videos section of my itunes. It would not load into my ipod unless i convertd it again using the itunes conver for ipod option. Why does this need to be converted again for ipod if its already in a .m4v and is there any way i can fix this so when im originally converting my movie with my converting software I can eliminate this last step in itunes. It takes up to 5 hours to convert in itunes. thanks

    I should also add that I am using a AVS video converter which has an IPod 5.5 converting option that makes my movies Highest available quality H.264, 30fps 640x480
    There are more Ipod options availble but im using the Highest quality available one. Maybe I should be using one of these:
    ipod 5x- NTFS Standard quality H.264 29.97fps, 320X240
    ipod 5x- PAL standard quality H.264 24fps, 320X240
    ipod 5x- low quality H264., 20fps, 320X240
    ipod 5x - Best quality (MPEG4, 24fps, 320X240)
    ipod 5x- economy quality (MPEG4, 20fps, 176X144)
    ipod 5x- for tv output (MPEG4, 24fps, 512X384)

  • Why does my FT freezes when it starts? or simply wont process the call?

    why does my FT freezes when it starts? or simply wont process the call?
    Facetime really *****...!

    Are you running iTunes 10.5.3?

  • Why does it take 40 minutes to start watching a rental on Apple TV but only seconds to start watching Netflix?

    Why does it take 40 minutes to start watching a rental on Apple TV but only seconds to start watching Netflix?

    Welcome to the Apple Community.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
    Netflix movies are adaptive and vary their quality according to your connection and can be as low as 0.5 Mbps.
    But remember lower datarates = lower quality.

  • HT1766 If in App Store and things are free or already downloaded why does it need my bank info

    If in App Store and things are free or already downloaded why does it need my bank info

    ITunes/App Store needs verification.
    Put in your valid credit card details associated with your Apple ID.
    You won't be charged if it's free.

  • Why does Itunes stop working when I start to play a movie

    Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

    when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

    Because your clip properties do not match your sequence settings.
    It will help a lot if you provide details ...
    FCE Easy Setup
    Sequence settings (vid rate, frame size, compressor)
    Source of your clips (camcorder make/model, etc)
    Clip properties (vid rate, frame size, compressor)

  • I cannot install apps that are upgraded to ios4.. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    i cannot install apps that are upgraded to ios4. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..

    I am having the exact same problem with trying to sync my iPad with my computer. To make a long story short, I had to reinstall Windows for my computer and therefore had to reinstall itunes.
    I have done back ups in the past for my ipod touch and other ipods with no problems, but unfortunately I have never been able to back up my iPad. During a sync, the iPad would always disconnect from my computer and it would never finish. it would say the connection was lost, but nothing is wrong with the connection.
    So now I have over 100 apps and thousands of pictures that I am afraid will be deleted if I run the sync in itunes. I have tried to transfer purchases and it goes through the list of apps, but nothing is ever transferred.
    Any help would be appreciated. I am not interested in jailbreaking my iPad to solve this problem. There should be a fix for this and I want to upgrade to ios 4.3 as the original poster. Please help

  • Why does my mac pro freeze on start up ?

    Why does my mac pro freeze on start up ? Some times this three or four times before i can get it to start correctly.

    Model Name:          Mac Pro
      Model Identifier:          MacPro4,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.26 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          8 MB
      Memory:          6 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP41.0081.B07
      SMC Version (system):          1.39f5
      SMC Version (processor tray):          1.39f5
      Sorry i am new to mac & communities , when you say repair the drives and clone the system  what do you mean ?

  • Why does EJB needs two interface???

    Hi All,
    This has been asked by many ppl and many of you might be having
    the correct answer for it. Please tell me....
    Why does EJB needs two interface (Home and Remote Interface)?. Why not one?
    Thanx to all...
    Regards
    GoodieGuy

    Hi Goodie ,
    Its good question and its a very valid one , one has to have doubt
    why two , why not one ..
    Here the answer goes ..
    First of all you need to understand that its a distributed computing technique ie I mean lot of people will be accessing the bean at the same time , right ? OK , you cann't access the bean directly.
    and lastly the stateless and entity beans do instance pooling.
    The very purpose of having two interfaces is
    1) To differnentiate the bussiness logic and life cycle methods .
    2) The home interface inititates life cycle methods like creation , destruction etc .
    3) There are lot of beans in the container , and through home you are
    creating the instance or accessing one of them .
    4) Once you have home object using it we get the remote object ie the instance of the bean that you want to access if stateless any bean can be called , if statefull depending upon the parameter in create method that respective bean is created and invoked .
    In ejb 1.0 and 1.1 even though the bean and the client are in same jvm its assumed that they are remote and in 2.0 Ver we have local this is to avoid network traffic .
    Hope you have got the answer , but if u still need clarification
    read EBRoman book first and second chapters thoroughly and then proceed
    a head.
    Bye
    Mahesh L.
    ============

  • Magic Mouse: Why Does It Need to Be Clicked When Restarting or Booting from Shutdown to Get Detected All the Time?

    Hi. I'm using Snow Leopard via USB external drive (the hardisk is blank- testing something with Leopard). When I start the late 2009 iMac and boot with the Option Key, I need to click the Magic Mouse all the time so the mouse can be detected and move the cursor to the Snow Leopard icon ( in its boot menu ). After the Magic Mouse is detected, it's good from there.
    Is this normal or there's something wrong with the Magic Mouse? The keyboard doesn't need to be pressed though to be detected, it's detected each time.
    Thank you in advance.
    God bless, Rev. 21:4

    I cannot see why you should have to click the magic mouse in order for it to be detected ... unless you have changed the batteries.  See my notes which cover the points made in your other recent post.
    Batteries.  Here are a few notes I've put together.
    Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems.
    Apple’s own brand, Eneloop and Energiser appear to be the best. Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor.  I have seen reports that some Logitech mice vastly exceed this.    Apple may suggest more in their sales blurb but this is a realistic expectation.  The benefit (if you are organised) is that you can always have charged batteries available.  Regular batteries will give you between 25 and 35 days before they need to be replaced. Note.
    Never mix old and new batteries or rechargeable and regular.
    The notes above are based on my personal experience, not shutting down my machine and using it for around four hours per day.  Note.  Monitors do not always faithfully report battery strength, particularly the rechargeable ones. 
    When checking your mouse or keyboard batteries ... Turn off the device. Remove the batteries, Clean the terminals both inside the battery compartment and the batteries themselves. Replace or renew both batteries. Turn on the device.  You should get a blinking green light if the device is paired. Click the mouse to activate it.  The green light becomes steady.

  • Why does my Mac Pro try to start up from a blank drive?

    I fitted a 2nd drive to my 2006 Mac Pro in anticipation of dual booting Windows (not done yet). The dive is FAT formatted but is empty. Why does the Mac Pro try to boot up from that drive every time I start it up, despite having set the startup disc as OS X in the System Prefs?! Getting sick of seeing the flashing folder with the question mark evry time I start it up.

    I might be inclined to think the problem is really on your startup drive. You might try reinstalling Snow Leopard.
    Also, try:
    Resetting your Mac's PRAM and NVRAM
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • Why does data need to be turned on for group texting?

    Why does single person text msg only need cell service, but group texting requires data turned on?

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Maybe you are looking for