Why does it only turn on when it's on hold, plugged in to my computer, and will not charge?

My iPod literally willl not turn on. The only thing that happens is:
I plug into my computer (still does not charge
Must be on hold
Shows the home screen for 2 seconds then says "connect to charger"
Note: THE LANGUAGE IS IN RUSSIAN AND I DONT KNOW WHY
Ok yeah thanks. -Dean Winchester

Hi DeanJWinchester,
Welcome to the Support Communities!
The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
iPod nano: Charging the battery
http://support.apple.com/kb/ht3215
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
I hope this information helps ....
- Judy

Similar Messages

  • Why does my screen turn black when I play iTunes while working on iPhoto?

    Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on  iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
    It would be nice if I could solve this problem once and for all.
    Thanks in advance for all the suggestions. I truly appreciate your help.
    Jan

    That was easy. Thanks. Jan
    Interval Since Last Panic Report:  1949305 sec
    Panics Since Last Report:          1
    Thu Feb  6 15:29:32 2014
    panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
    RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
    RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
    R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
    RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff807867b470 : 0xffffff8000220792
    0xffffff807867b4f0 : 0xffffff80002c4794
    0xffffff807867b6a0 : 0xffffff80002da55d
    0xffffff807867b6c0 : 0xffffff7f81d89ff3
    0xffffff807867b800 : 0xffffff7f81d8a694
    0xffffff807867b890 : 0xffffff7f81d8b4ed
    0xffffff807867b8d0 : 0xffffff7f81d472a1
    0xffffff807867ba40 : 0xffffff7f81d8bd6d
    0xffffff807867bb00 : 0xffffff7f81d44346
    0xffffff807867bb60 : 0xffffff8000655f3e
    0xffffff807867bb80 : 0xffffff800065681a
    0xffffff807867bbe0 : 0xffffff8000656fbb
    0xffffff807867bd20 : 0xffffff80002a3f08
    0xffffff807867be20 : 0xffffff8000223096
    0xffffff807867be50 : 0xffffff80002148a9
    0xffffff807867beb0 : 0xffffff800021bbd8
    0xffffff807867bf10 : 0xffffff80002af140
    0xffffff807867bfb0 : 0xffffff80002dab5e
          Kernel Extensions in backtrace:
             com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
                dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
    BSD process name corresponding to current thread: iPhoto
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: iMac10,1 (Mac-F2268CC8)
    System uptime in nanoseconds: 11526391261403
    last loaded kext at 23020191300: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
    last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver    13 (addr 0xffffff7f8254c000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleBluetoothMultitouch    70.12
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.driver.AudioAUUC    1.59
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleMikeyDriver    2.2.5a5
    com.apple.driver.AppleBacklight    170.2.2
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.AGPM    100.12.75
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.GeForce    7.3.2
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
    com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.AppleUSBCardReader    3.0.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.iokit.IOAHCISerialATAPI    2.0.3
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AirPort.Atheros40    505.67.1
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.nvenet    2.0.17
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.driver.AppleUSBOHCI    5.1.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.driver.AppleMultitouchDriver    231.4
    com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.nvidia.nv50hal    7.3.2
    com.apple.NVDAResman    7.3.2
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
    com.apple.iokit.IOUSBMassStorageClass    3.0.3
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBMergeNub    5.1.0
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IO80211Family    420.3
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.NVSMU    2.2.9
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.11
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    System Profile:
    Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST3500418ASQ, 500.11 GB
    Serial ATA Device: HL-DT-ST DVDRW  GA11N
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
    USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
    USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6

  • Why does my contact turn red when I try to text someone?

    Why does my contact turn red when I try to text someone?

    What version of iPhoto and of the OS?
    For iPhoto '11 Start by repairing permissions - usually this is a permissions issue - Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - repair your iPhoto permissions
    LN

  • Why does my ipod turn off when I dim the backlight?

    why does my ipod turn off when I dim the backlight?

    Probably because you do not have the headphones plugged all the way in. Make sure the plastic on the headphone jack is flush with the body of the Nano.
    Incidentally, you are not running iOS 1.x

  • Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

    Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

    c.pfaffenbichler wrote:
    Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
    And what kept you from posting a screenshot?
    I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos.  You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
    It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image.  I've uploaded it at the size it was supplied to me at (about 2700 pixels wide).  So
    Click to open the full image, right click and copy, and paste into Photoshop.
    Select the clone tool, and set its blend mode to Darken.
    Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
    Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
    It works even better if you clone on a new layer also set to Darken.  No masking, just Photoshop blend mode magic.
    You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
    Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

  • My iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging as well, bit confusing

    my iphone 4 does not appear in my(windows 7) lap top, when i connect i can hear the sound of usb connected, but its not appear in the itunes or computer, and its not charging when i connected to the laptop as well, bit confusing, help please

    Take a look at this link, http://support.apple.com/kb/TS1538

  • My phone says it needs to be restored, however when i plug it into my computer it will not turn on

    my phone says it needs to be restored, however when i plug it into my computer it will not turn on

    Purchased iTunes content can be re-downloaded:
    http://support.apple.com/kb/HT2519
    Any photos in your camera roll, not previously imported to your computer, you will lose. You should be regularly importing these photos, as the iPhone's camera roll is not designed as a storage device.
    Had you been regularly syncing/backing up, you wouldn't lose anything. Now you know, don't backup your data, and you will eventually lose it all, guaranteed.

  • My iPhone 4 has just shut down.  Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge.  Any suggestions

    my iPhone 4 has just shut down.  Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge.  Any suggestions?  I did download a ringtone app and went on to iTunes to sync!. 

    Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • HT1567 I have the volume control symbol in the center of my iPad all of the time.  My music will not play and the volume remains off.  When I try to increase the volume manually it statics and will not maintain a volume level.  Thanks

    I have the volume control symbol in the enter of my iPad all of the time.  My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level.  Thanks

    Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.

  • My Lightning to 30-Pin Connector will only play music through my iPod dock, and will not charge my iPod touch 5th gen.

    My Lightning to 30-Pin Connector will only play music through my iPod dock from my iPod, and will not charge my iPod touch 5th gen. Help me please.

    Have you tried resetting the dock by removing it from power?  What about resetting the iPod Touch? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • My ipod touch overheats and will not charge! Please help as I've only had iPod for 3months :(

    My iPod tough overheats and will not charge! Its been doing this for the last week and so it's starting to pee me off as my partner and I both brought them from the same store, same time and his is perfectly fine
    Please help

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • My ipad 1 will not charge, unless I plug it in, and then turn it off for the entire duration of its charge. If I turn off my ipad and then try and charge it, it just turns on and will not charge. It will also not be recognized by my computer. Any help?

    So, I have an ipad 1 as shown above. Recently it froze so I followed Apple instructions and held down the home button and the sleep button until it reset. A couple weeks later I noticed that it would not charge with either the wall plug in or usb plug in. I discovered that it would charge only if it was completely dead (up to 5% and then it stops charging) or if I plug it in via wall plug, then turn it off, and leave it off until it is completely charged. It will not charge if it is on. I have followed all of Apples help/troubleshooting and it still hasn't worked. This would not be such of an issue, but now I have learned that the ipad will not be recognized by itunes and cannot be updated. Does anyone have any ideas? Thanks

    Make an appointment at your local Apple store and take it back. I think there's some sort of hardware issue going on and they are the only ones to handle it.

  • IPod turns off as soon as I unplug it and will not charge or respond.

    I've had trouble charging my iPod, as in it won't charge whether hooked up to a wall socket or to a usb, I've tried changing both usb slots and sockets to no avail and tried resetting repeatedly.
    Now it works fine while plugged into a socket (not when plugged into the computer) but the instant I unplug it it switches off and will not respond, unable to reset it or turn it on or anything, I've left it on charge for a long time and also tried to drain the battery totally and then charge it, neither of these had any effect.

    Sounds like a defective battery or something wrong with the charge circuitry inside the iPod. In either case, if this is an iPod Classic, it is under warranty and should be returned to Apple for repair or replacement.
    Patrick

  • What does this mean:"System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ ARDAgent" has been modified and will not be repaired.

    My computer is running well but I get this every time I repair the disk permissions, does anyone know why?:
    “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAge nt” has been modified and will not be repaired.ACL found but not expected on “private/var/root/Library”Repaired “private/var/root/Library”ACL found but not expected on “private/var/root/Library/Preferences”Repaired “private/var/root/Library/Preferences”
    I don't believe I've ever had absolutely nothing ...
    Thanks.

    That's a permission issue caused by an Apple Remote Desktop client update. It can be ignored and it does not cause any issue, so do not worry about it. See > http://support.apple.com/kb/ts1448

  • HT1212 My Ipod is reading Ipod diabled connect to itunes but when i connect it tells me it has a passcode and will not let me do anything

    My ipod reads Ipod disabled connect to itunes. When i connect to itunes a box appears on the computor screen and will not access the ipod and says it has a passcode and will not let me try to enter a passcode into the ipod? What can I do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

Maybe you are looking for

  • Exchange 2010 SP3 Create Dynamic DL for Direct Reports

    I am not sure this is possible but if there is a will there is a way I guess. System: Exchange 2010 SP3 on Windows Server 2008 R2 I am trying to see if there is a way to create dynamic DLs for Manager(s) direct reports. Example: Manager has 5 people

  • Bug or feature? -- Unconditional branch using "Go To Page &P12_PREV_PAGE."

    I have used unconditional branch "Go To Page &P12_PREV_PAGE." successfully for updating a table record page and then returing to the previous page stored in the P12_PREV_PAGE item. But the same approach failed when I deleted a table record page. Alth

  • Quicktime doesn't play video or audio

    I'm working of a brand new Macbook with OSX 10.4.9 and I just upgraded to Quicktime Pro 7.1.3 I have a bunch of movie files that I've saved over the years that won't play. They're AVI files, and they open but all that's there is a white screen and no

  • MTP and CFB of call manager not registered

    dears, some thing strange is going on which i never face in my life. by default the mtp and cfb are registered but they are not registered while all other media ann and moh are registered that's only for pub but sub all are working fine

  • Filter on Table UI Element

    Hi am trying to implement the table filter for my webdynpro component based up on the inputs from the SDN posting: [Link To SDN Post|Filter functionality; I have 2 context nodes:TABLE_NODE & FILTER. The 1st node is based on the dictionary structure M