Why does it report missing *.dll when running standalone programs on a separate PC without LabVIEW?

I wrote a LabVIEW code to control GPIB, DAQ and Serial port. Then I built an installer including runtime engine. Everything works fine at the PC with the LabVIEW. I copy this installer folder to another computer without LabVIEW. I had no problem to install the program. But after I run the program, it started to ask for nilvaiu.dll. After I copied it under C\Windows\System32\, it started to ask for nimdbgu.dll, then niorbu.dll. Then it reported "The procedure entry point_pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll"
I guess it missed some drivers. So I installed NI-488.2 for Windows on the PC. But it did not solve the issue.

hi there
i recommend to update to DAQ 7.4. the performance is much better.
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Similar Messages

Why does this script not work when run with osascript cli?

I wrote the following to interface with geektool to display a list of todo's on my desktop (i'm sure it's been done elsewhere, but I wanted to try it myself). I had it working fine until I tried ordering the output to place the highest priority items at the top of the list. The following code works properly during development in Script Editor, but when geektool launches the command using osascript ~/Library/Scripts/todos.scpt it only displays the initial "TODOS:" without displaying the rest of the info. Searching the Applescript Release notes, I found that some versions of Applescript 1.8 had issues with null characters when using the osascript cli, however, I'm running 1.10.7 so it shouldn't be an issue (and I'm not sure how to check for null characters in Applescript even if it were). Anybody have any ideas on what's going on here?
set output to {"TODOS:
set highpri to {}
set medium to {}
set low to {}
set nada to {}
tell application "iCal"
repeat with i in calendars
repeat with j in todos of i
if (completion date of j as string) is equal to "" then
if priority of j as string is equal to "high priority" then
copy summary of j & "
" to end of highpri
end if
if priority of j as string is equal to "medium priority" then
copy summary of j & "
" to end of medium
end if
if priority of j as string is equal to "low priority" then
copy summary of j & "
" to end of low
end if
if priority of j as string is equal to "no priority" then
copy summary of j & "
" to end of nada
end if
end if
end repeat
end repeat
end tell
return (output & highpri & medium & low & nada) as string

well, i'd been pulling my hair out for quite a while with this and decided it was time to ask for help, but I thought I'd give it one last shot and found a resolution almost immediately. I figured that problem had to be caused by the way applescript was concatenating the lists, so I got rid of the lists completely and it still wouldn't work. This convinced me that it must be newline related since that was the only special character left in the string. I opened up the script in vi, but the default compiled script format is not human readable. The osascript man page indicated that it would accept both compiled and text scripts, so I gave it a try, and osascript handled the raw text file wonderfully.

Why does it say missing plugin when i try to watch a video or play an online game

While i'm in safari and i try to watch certain videos or play online games it says missing plug-in

Jason1974 wrote:
While i'm in safari and i try to watch certain videos or play online games it says missing plug-in
Download and install the latest flash plugin only from the adobe flash download page. I believe safari is disabling or removing older versions of the flash plugin.

Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

Question
why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

See also "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Why does my screen turn black when I play iTunes while working on iPhoto?

Why does my screen turn black when I play ITunes while working on iPhoto? I can't click off of the screen but get a message that reads Shut down computer by pressing button in back then turn computer back on by pushing button in back. That's followed by Chinese letters (which I cannot read). I have had other problems when playing iTunes (actually, a radio station on the Internet) while working on iPhoto. Before, I got a window that would pop up and tell me I had no disk space available, that I would have to quit applications that were open. Not many were open.
It would be nice if I could solve this problem once and for all.
Thanks in advance for all the suggestions. I truly appreciate your help.
Jan

That was easy. Thanks. Jan
Interval Since Last Panic Report: 1949305 sec
Panics Since Last Report:          1
Thu Feb 6 15:29:32 2014
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d89ff3, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff7acd4a2a7c, CR3: 0x0000000085d3b000, CR4: 0x0000000000000660
RAX: 0xffffffff4bffff56, RBX: 0x0000000000000000, RCX: 0x0000000000000001, RDX: 0x0000000000000000
RSP: 0xffffff807867b7c0, RBP: 0xffffff807867b800, RSI: 0xffffff7acd4a2a7c, RDI: 0xffffff8065292000
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0xffffff7f81d44200, R11: 0xffffff800f8b45e8
R12: 0xffffff8065292000, R13: 0xffffff807867b860, R14: 0x0000000000000001, R15: 0xffffff7acd4a2a7c
RFL: 0x0000000000010286, RIP: 0xffffff7f81d89ff3, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff7acd4a2a7c, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff807867b470 : 0xffffff8000220792
0xffffff807867b4f0 : 0xffffff80002c4794
0xffffff807867b6a0 : 0xffffff80002da55d
0xffffff807867b6c0 : 0xffffff7f81d89ff3
0xffffff807867b800 : 0xffffff7f81d8a694
0xffffff807867b890 : 0xffffff7f81d8b4ed
0xffffff807867b8d0 : 0xffffff7f81d472a1
0xffffff807867ba40 : 0xffffff7f81d8bd6d
0xffffff807867bb00 : 0xffffff7f81d44346
0xffffff807867bb60 : 0xffffff8000655f3e
0xffffff807867bb80 : 0xffffff800065681a
0xffffff807867bbe0 : 0xffffff8000656fbb
0xffffff807867bd20 : 0xffffff80002a3f08
0xffffff807867be20 : 0xffffff8000223096
0xffffff807867be50 : 0xffffff80002148a9
0xffffff807867beb0 : 0xffffff800021bbd8
0xffffff807867bf10 : 0xffffff80002af140
0xffffff807867bfb0 : 0xffffff80002dab5e
      Kernel Extensions in backtrace:
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d390 00->0xffffff7f81dfbfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 b0000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f8089e000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80865000
BSD process name corresponding to current thread: iPhoto
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 11526391261403
last loaded kext at 23020191300: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8234b000, size 28672)
last unloaded kext at 522057763087: com.apple.driver.AppleFileSystemDriver    13 (addr 0xffffff7f8254c000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AppleBluetoothMultitouch    70.12
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
com.apple.driver.AudioAUUC    1.59
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleHDA    2.2.5a5
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMikeyDriver    2.2.5a5
com.apple.driver.AppleBacklight    170.2.2
com.apple.driver.AppleMCCSControl    1.0.33
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.AGPM    100.12.75
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AudioIPCDriver    1.2.3
com.apple.driver.ApplePolicyControl    3.1.33
com.apple.GeForce    7.3.2
com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController    4.0.8f17
com.apple.driver.AppleUSBCardReader    3.0.6
com.apple.driver.AppleIRController    312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    33
com.apple.iokit.SCSITaskUserClient    3.2.1
com.apple.iokit.IOAHCISerialATAPI    2.0.3
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.1.0
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleFWOHCI    4.9.0
com.apple.driver.AirPort.Atheros40    505.67.1
com.apple.driver.AppleAHCIPort    2.3.1
com.apple.nvenet    2.0.17
com.apple.driver.AppleUSBHub    5.1.0
com.apple.driver.AppleUSBEHCI    5.1.0
com.apple.driver.AppleUSBOHCI    5.1.0
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleACPIButtons    1.5
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.5
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
com.apple.nke.applicationfirewall    3.2.30
com.apple.security.quarantine    1.4
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
com.apple.driver.AppleMultitouchDriver    231.4
com.apple.driver.IOBluetoothHIDDriver    4.0.8f17
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.driver.DspFuncLib    2.2.5a5
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.iokit.IOSurface    80.0.2
com.apple.iokit.IOAudioFamily    1.8.6fc18
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleGraphicsControl    3.1.33
com.apple.driver.AppleHDAController    2.2.5a5
com.apple.iokit.IOHDAFamily    2.2.5a5
com.apple.nvidia.nv50hal    7.3.2
com.apple.NVDAResman    7.3.2
com.apple.iokit.IONDRVSupport    2.3.4
com.apple.iokit.IOGraphicsFamily    2.3.4
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
com.apple.driver.IOPlatformPluginFamily    5.1.1d6
com.apple.driver.AppleSMC    3.1.3d10
com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
com.apple.iokit.IOBluetoothFamily    4.0.8f17
com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.1
com.apple.iokit.IOUSBMassStorageClass    3.0.3
com.apple.iokit.IOUSBHIDDriver    5.0.0
com.apple.driver.AppleUSBMergeNub    5.1.0
com.apple.driver.AppleUSBComposite    5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
com.apple.iokit.IOFireWireFamily    4.4.8
com.apple.iokit.IO80211Family    420.3
com.apple.iokit.IOAHCIFamily    2.0.8
com.apple.iokit.IONetworkingFamily    2.1
com.apple.iokit.IOUSBUserClient    5.0.0
com.apple.iokit.IOUSBFamily    5.1.0
com.apple.driver.NVSMU    2.2.9
com.apple.iokit.IOHIDFamily    1.7.1
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    177.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    331.7
com.apple.iokit.IOStorageFamily    1.7.2
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.5
com.apple.iokit.IOPCIFamily    2.7
com.apple.iokit.IOACPIFamily    1.4
System Profile:
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GA11N
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x26200000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1003, 0x06400000 / 3
USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x020b, 0x06430000 / 4
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 6

Why does an unknown error occur when I try to save a document as a word file?

why does an unknown error occur when I try to save a document as a Word file?

Hi Judy,
Deleting the Preferences files seems to be missing from your list.
Quit AppleWorks,
In the Finder, go to:
username > Library > Preferences
In the Preferences folder:
Locate and Delete the File com.apple.appleworks.plist
Locate and Open the Folder AppleWorks
In the AppleWorks folder, delete the following files:
AppleWorks 6 Assistants Cache
AppleWorks 6 Preferences
AppleWorks 6 Translators Cache
Optional:
AppleWorks Button Bars
This file contains your Button Bar preferences. If you have made changes to the Button Bar, but hanve NO issues that can be traced to the Button Bar, it may be left in place.
Regards,
Barry

Why does the iPod duplicate songs when updating my playlists?

Why does the iPod duplicate songs when updating my playlists? Also, you cannot use the "show duplicate songs" feature on the iPod - I suppose that is because it is not supposed to duplicate songs on the iPod. But, if that is the case - why does it do it?

Try resetting your iPod, press and hold the power and the home buttons together approximately 15 seconds until the Apple logo appears. If that does not work try going into Settings>General>Reset>Reset All Settings. If that does not work try connecting to you iTunes library via the cable and un-sync the library from your iPod then sync the library. For the next 2 options backup your iPod first, then do a Restore iPod from backup, if that doesn't work... As a last resort Restore your iPod as New. I too had the red circle and square after updating to 7.0.4 the last resort fixed mine, others have reported doing all the above, all have had reports of fixing the problem and not fixing it. Give it a try, hopefully one of these works, Good luck.

Why does ical rearrange my events when i print?! 10.9

why does ical rearrange my events when i print?!
I'm on a macbook pro running the latest version of 10.9
Everything is organized the way I like it, but once I go to print, it rearranges the order of my events!
How do I fix this?
Thanks!

I had the same problem a few weeks ago and called apple support. The solution is as follows:
Most apple users have multiple devices using icloud such as an iPdad, iPhone, and other computers. In my case, I had two computers, two iPads, and one iPhone. After speaking to apple support, I realized that one of my ipad's setting were set to delete events older then 2 weeks. In short, if you are expeirienceing problems with ical deleteing events, you better check all your devices. If just one of them is set wrong in your preferences, you will lose past events. Even check computers you gave to your cildren or other members of the family. You will probably find out that the settings on one of these machines is causing your problems.

Why my tax reporter number range is running so fast?

hi experts,
I really don't know why my tax reporter number range is running so fast. I ran the tax reporter for only like 15 times for only 30 employeess in production but the tax reporter number range goes upto 9234. why is that so. how does numberrange in tax reporter works and how do i fix it.
Thanks,
Rahsmi

Thanks for that. Arun, i checked that but its like this which is standard SAP thing
no.     from         to   current number    EXt.
1       1           8999    20
99      9000     9999      9659
Ext. is not checked, so its all coming internally. what u say?

Why does Safari go into limbo when I try to search for some things?

     Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
    If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
having with Safari since I installed Yosemite.
     Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
     Any help or suggestions would be great
     Ron

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my iPhoto quit unexpectedly when transferring pics to 32gb memory stick

why does my iphoto quit unexpectedly when transferring pics to a 32gb memory stick at the same place each time?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Why does my mac sometimes freeze when waking up?

Why does my mac sometimes freeze when waking up? It only happens sometimes, but also happens spontaneously. 21' iMac 2011 model. It just started recenlty after a new firmware update from apple. Any advice or reasons why would be appreciated.

boot to lion recovery and run verify/repair on the hard drive. verify will say: appears to be okay OR needs to be repaired. No matter what outcome, you will repair anyways (as it will do some updating on the volume)
Process: hold command R during startup/ wait till you see mac os utility (might have to select english as the main language first) then disk utility/ select macintosh HD on the left, and then verify/repair on the right bottom side. Cheers!

Why does my ipod turn off when I dim the backlight?

why does my ipod turn off when I dim the backlight?

Probably because you do not have the headphones plugged all the way in. Make sure the plastic on the headphone jack is flush with the body of the Nano.
Incidentally, you are not running iOS 1.x

Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

Why does my macbook shut down when I am watching a film using airplay on apple TV?

why does my macbook shut down when I am watching a film using airplay on apple TV?

It appears to shut down and all the open programmes are closed

Why does it report missing *.dll when running standalone programs on a separate PC without LabVIEW?

Similar Messages

Maybe you are looking for