Why does it say, "Cannot Restore Backup" when I try to restore my iPhone using iCloud on iOS 7.1.1?

When choosing iCloud backup I choose the most recent backup but then after a few seconds it says "Cannot Restore Backup", what do I do?

its not possible to restore to a backup from a newer IOS

Similar Messages

  • Why does error code 4005 pop up when i try to restore my ipod 5?

    why does error code 4005 pop up when i try to restore my ipod 5?

    Have you tried this support article ?      http://support.apple.com/kb/ts3074

  • WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD??

    WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD ???

    How are you trying to charge it, via a computer or the wall plug ? If a computer, then a lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
    If the wall charger then have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If that doesn't work then have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
    And for info typing in capitals is considered SHOUTING.

  • Why does it say "unsupported language/platform" when I try to download Adobe Standard? I have the latest updates of IE and Google Chrome and have tried both.

    Why does it say "unsupported language/platform" when I try to download Acrobat Standard? I have the latest updates of IE and Google Chrome and have tired both.

    The message doesn't mention IE or Chrome - it mentions language/platform.
    So...what is the language of your system?
    And what is your platform - by which we mean for example Windows Vista or Mac OS Lion.

  • Why does it say Apple ID disabled when I try to update an app

    Why does it say my Apple ID is disabled when I try to update an app.? My ID works for everything else. Also, I thought with the new iOS update that apps are supposed to update themselves but mine haven't.

    On your Mac/PC open iTunes (make sure it is updated). On the tabs on the left click on "iTunes Store". This will change the window on the right to the iTunes store. The top right corner should have your Apple ID or Sign In written. If there is an Apple ID written click on it and Sign Out. The corner should then change to "Sign In".
    Now click on Sign In and sign in with the wrong/incorrect Apple ID that you no longer wish to use or update from.
    Once logged in, click on the down arrow that shows when you move the pointer on the top right corner where it should now show the apple id, and select Account.
    The page that opens up should have a section called "iTunes in the Cloud" with a tab on the side saying "Manage Devices".
    Click on Manage Devices. Its should list your iPhone or iPad that you no longer wish to use with this Apple ID. And click Remove.
    Once its confirmed click "Done" and from the top right corner select Sign Out.

  • Why does it say session timed out when I try to make a purchase please help

    when ever I try to make a purchase and answer the security questions after it says session timed out evey time so I can't download apps please help
    -fron yours truly gandalflord69

    Try resetting the questions
    Forgotten Security Questions/Answers
    You need to contact Apple by:
    1 - Using this form
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57
    3. Contact Apple by:          
    Apple ID: Contacting Apple for help with Apple ID account security
    For general  information see:
    Apple ID: All about Apple ID security questions

  • Why does Safari say "Blocked Plug-in" when I want a video?

    Why does Safari say "Blocked Plug-in" when I want a video?

    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.

  • HT3702 Why does it say invalid security code when I'm prompted to sign in?

    Why does it say invalid security code when I'm prompted to sign in. I have intered my security code from my credit card several times. It will not allow me to use the app store, even for free purchases.

    Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
    If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
    And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

  • Why does my FCX program quit suddenly when I try to capture from my camcorder?

    Why does my FCX program quit suddenly when I try to capture from my camcorder?
    When it opens it says "no codec found". I used HDV Apple intermediate codec 1080i60. What codec should I use?

    Do you mean Final Cut Express or FCP X?
    These are two different apps.
    Al

  • Why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    why does an unknown  error (-42110) appear when i try to play a rental movie that has downloaded already?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • Why does SMS tell me "not allowed" when I try to add an existing contact to one of my SMS Groups?

    Why does SMS tell me "not allowed" when I try to add an existing contact? 

    If you are running Tiger, you don't have time machine. 
    You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups.  The free versions do a lot and you can upgrade to the full-service versions for small change if you need more.  The one time I used SuperDuper! for cloning a volume it worked just fine. 
    (My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

  • HT201210 my iphone says it needs to be restored but when i try to restore it it says it cant be restored and theres an unkown error

    My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error

    Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
    01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
    [01:41:37.0017]    Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
    [01:41:37.0017]       Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
    [01:41:37.0017]          Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
    [01:41:37.0017]             Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
    [01:41:37.0017]                Depth:5 Error:Exception at :0:
    [01:41:37.0017]           - kBBUReturnTimedOut(8)/16: Pinging timed out
    what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
    This is the line of the log that appears and when the restoration is correct:
    amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
    Regards.

  • Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the d

    Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.

    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • TS3694 Why am I getting error code 3194 when i try to restore my ipod?

    Why am I getting error code 3194 when I try to restore my ipod touch 4th generation

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    http://support.apple.com/kb/TS3694#error3194
    Also see:
    iPhone Error 3194 - How to Fix iTunes Error 3194?

  • Why is showing an error of 3194 when i try to restored my phone

    why is showing an error of 3194 when i try to restored my iphone

    http://support.apple.com/kb/TS3694#error3194
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

Maybe you are looking for

  • Airport Extreme + shared USB hard drive // Mac + PC Access

    We are getting ready to purchase an Airport Extreme for our home network. Here's what we are working with: 1) Airport Extreme 2) MacBook 3) MacMini 4) PC 5) TBD USB hard drive that will be connected to AirPort Extreme *for use as shared hard drive* F

  • I got my T510!!! Er, how do you do a few things....

    It looks awesome.  I'm just starting to play with it now.  i7 620-m processor, win7 ultimate, 4g ram. Unfortunately I haven't owned a thinkpad since 2001.  And there is no user manual included, nor any user manual available online. If anyone could te

  • Getting mail on my ipad

    Can anyone help?  I am trying to get my mail to open via m new ipad but it will not allow me to do this.  I have checked all the information is correct but it just keeps telling me to check. Anyone know why?

  • Problem Pushing Printer Preferences through Group Policy

    Most of the time, networked printers that we push through group policy preferences show up just fine on our clients (Windows 7). About 1 in 10 computers fail however, and it's driving me up the wall! The computer that fails is not consistent, meaning

  • Error after download

    Hi, I made a MVC application which creates a csv-file. Afterwards it gets uploaded to the client. My problem at Win2000 PCs with IE6: After the first download, the Internet Explorer shows an error. (Unknown error, error code 0) In this iView nothing