Why does it say headphones when i use the volume buttons

why does it say headphones when i use the volume buttons instead of volume when the headphones are not plucked in?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Similar Messages

When i play music on my ipad mini no sound comes out and when i use the volume button it says headphones like headphones are connected and they are not.

when i play music on my mini no sound comes out, so i push the volume button thinking it was turned down and it keeps saying headphones like headphones are connected and they are not even plugged in>

Hi Try a, reboot, press & hold power button & menu, button, hold both down until you see Apple Logo. Before you do Reboot, Sign out, of itunes on ipad then sign, back in this may help. Cheers Brian

I took my headphones out of my iPod but when I use the volume it still says there in. Why?

I had my headphones in and then I took them out. But my iPod insists I still have them plugged in. So now I can't listen to things out loud. I'm really aggravated because I tried plugging them back in and then out but it still says I have headphones in when I use the volume. How can I fix this problem?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

HT3728 Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

On the older version of the AE you can still use older airport utility.
But once you load the new one you cannot easily go back.. you can load an older 5.6 version though.. instructions below.
For 6.3 you need to run ipv6 local link.
see http://support.apple.com/kb/TS4597
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

HT201210 why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?

why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?

no into my labtop i have internet but for some reason when i plug my iphone into it it saids update servers could not connect to the internet please check to make sure u have internet and i do.

Why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet?

why does it say itunes can not contact the ipod update server because you are not connected to the internet when i am connected to the internet? i need to update my ipod i even changed the LAN settings and it stilll doesnt work

Have you seen this article?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
B-rock

Why does Itunes say it can't find the original file for a particular song?

why does Itunes say it can't find the original file for a particular song? and then asks if I want to locate it? I can't access a bunch of old song files. any new cds are available to me in itunes. all others are not accessible. how do i merge the new cd's with the old ones so that all the songs are playable in Itunes. thanks.

sheri 0713 wrote:
Of course, I have backed up to CD and/or external drive.
I'm wondering if you're attempting to maintain your library on your external HDD? If iTunes has been directed to use a location on your external hard drive as your iTunes Music Folder location (you can check this in iTunes > Preferences > Advanced tab) you MUST ensure that the hard drive is connected to the computer and mounted in the Finder prior to launching iTunes. If it isn't, it can cause this error to appear. This is probably one of the most common reasons this error begins to appear.
It seemed my purchased songs were the first to DISAPPEAR and I had to rebuy.(Nice scam in the bug?)
So... why not restore them from your backup? If, for some reason, this wasn't an option, you could have also recovered them from any iPod or iPhone they were currently synced to (http://support.apple.com/kb/HT1848), or, you can also email iTunes Store support and request a "regrant," which is a once-per-account exception they might be able to offer you and allow you to download missing purchases again.
I am now convinced this a HUGE BUG in 7.7.1. and possibly the previous version or two.
I'm not so sure... I've never run across this particular error (my library is stored on my internal hard drive, but copied to an external for backup purposes with an application other than iTunes or Finder. I don't think Apple will provide acknowledgment to issues experienced only by very small numbers of people... I'm one of those, perhaps foolish, individuals who allows my computer to download updates immediately, rather than waiting for fear of problems, and again, I've never had this error.
CG

My 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down

I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
Good luck!

Can anyone answer why photoshop CS3 shuts down when I use the scanner?

Can anyone help me with why photoshop CS3 shuts down when I use the scanner? I recently upgraded to OS X Yosemite.

Ask in the PS forum and be much more specific. You have not provided exact system information, crash logs, scanner details. That said, this may be a compatibility issue that can't be overcome.
Mylenium

Does the magic mouse not have the feature of viewing all open pages on desktop like you do when you use the side buttons of the wired mouse?

Does the magic mouse not have the feature of viewing all open pages on the desktop like you do when you use the side buttons of the wired mouse?

No, you'll have to use Mission control for that. It's either located on the dock, the F3 key on recent laptops on a swipe on the trackpad.
Regards,
Captfred

Why doesn't anything happen when I hit the download button for Mavericks OS X? I have a MacBook Late 2009 with Lion 10.7.5.

Why doesn't anything happen when I hit the download button for Mavericks OS X? I have a MacBook Late 2009 with Lion 10.7.5.

Down load fron the Internet OmniDiskSweeper (free) and open it. It will show you all of your files and the respective sizes.
In addition, click on your HDD icon in the upper right hand corner of your desk top with COMMAND I (I as in the letter i). What does it say about the space used and available.
You may be experiencing this phenomenon:
http://pondini.org/TM/30.html
Ciao.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran.

I am using a Microsoft Natural keyboard and when i use the close button on Ver. 5.0 or newer it closes the whole screen not just the active tab is there a fix for this

I am using a Microsoft Natural 4000 Keyboard
IF I update to Mozila 5.0 when i use the close button it shuts down the whole browser nut just the active tab
Is there a workaround for this because I like the close button feature

Could you try disabling graphics hardware acceleration? (I'm having trouble determining from your "More system information" whether it's enabled or disabled.) Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
If you restart Firefox, is the issue resolved?

Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?

Hi Guys! I have an Imac with Mac OS X version 10.5.8 and bought a wireless keyboard. Unfortunately I can´t use the volume buttons on the keyboard. I have checked almost everything, does anyone have any good idea?

Hello, try kguy's solution here...
https://discussions.apple.com/thread/2332457?start=0&tstart=0
First, Go to System Preferences, keyboard, and click on the Keyboard tab
Make sure that the checkbox by "Use all F1, F2, etc, keys as standard function keys" is NOT checked.
Next, click on the Show All button, and select Bluetooth. You should see your Apple Wireless Keyboard listed on the left side of the screen.
Click once to select it, and then click the gear icon at the bottom of the box, and choose Disconnect.
Power off the keyboard by holding down the power button on the keyboard for a few seconds until it show "keyboard Off on your imac screen, then turn it back on again.
The device should appear once again in your bluetooth list.
Try out the volume control buttons now, and see if that cleared things up

Why does it say headphones when i use the volume buttons

Similar Messages

Maybe you are looking for