Why does it show 54 photos on my About screen, when I have only 9 photos on my iPad mini?

Hello,
I have an iPad mini 2 (16GB White Wi-Fi) that I got for Christmas of 2013, and absolutely love it. I have had no problems so far. However, there is one thing that annoys me a little.
On my iPad, I have 9 photos that I took with the camera. On the About screen, it says I have 54 photos, and I have no idea why! I've disabled iCloud photo sharing, but I still have no idea why this is happening.
Does anybody know how to fix this? Any solutions would be greatly appreciated.
Thanks!

Do those 'extra' movies have a little cloud symbol? That means that you have access to the movie but it's stored in the cloud until you download it.
You can go into settings, scroll down to video and then change the setting 'show all videos', if it's showing all of them it shows what's on the device and available in the cloud. If it's not, then all you see is what's actually on your device.

Similar Messages

Why does Google show up as the search engine - when I have Firefox installed?

I installed firefox as my browser, because Google is having more and more problems and I do not want them as a search engine. But when I opened Firefox there was Google in the search bar????? It does not work. when I go to an initial website it is ok, but when I try to re-direct to another site - it hangs up and will not connect.

Google pays Mozilla to be the default search engine, but of course you can change it. The search bar is simplest: you just use the drop-down to choose a different search service. If your preferred site isn't available, let us know what it is. The address bar is next simplest, but you need to paste a new preference in through a slightly obscure method. <s>Changing the search box on the built-in Firefox homepage is the hardest.</s> ''The search box on the built-in Firefox homepage can be changed as described in the next post.''
There is some malware going around that redirects Google results to random sites. Usually the pattern is that using the back button to return to the results and clicking again will take you to the correct site. If you think you might have this problem, check out this thread: [https://support.mozilla.org/en-US/questions/939017 Google Redirect Virus Removal].
As with many security issues, choose any new software tools with a degree of skepticism because some of the purported cures promoted on blogs and fixit sites may be worse than the disease.

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Why does Messages still send my txt via SMS when I have the "send as SMS" option turned off?

Why does Messages still send my txt via SMS when I have the "send as SMS" option turned off?

I haven't missed any point, but you don't get it.
If people take "Send as SMS" being turned off as the iPhone shoiuld not be sending SMS messages without reading this text that is included below the option:
Send as SMS when iMessage is unavailable. Carrier messaging rates may apply.
They are idiots.
But you're saying you have this other piece of information that tells you that this option only applies to two iphones exchanging txt. Where did you obtain such information?
Copied from my previous post.
Under the Send as SMS option, the following is available:
Send as SMS when iMessage is unavailable. Carrier messaging rates may apply.
You should check available text below an option such as this so you know what it does.

Why does it show my Apple ID is disabled when I try to download puffin web browser?

Why does it show that my Apple ID is disabled when I try to download puffin web browser. It works for everything else.

If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html

HT1600 why does the apple TV say theres no connection when I have it?

Why does my apple TV want to recognize my internet password? and what does -39092 mean?

Hi MLFO!
I have some information here that I believe will help you troubleshoot this issue a little further. The article is about Wi-Fi connections and the Apple TV, and can be found here:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Follow the steps provided in that article and you should be well on your way toward resolving this issue. It may also be necessary or helpful to reference this article as well, which contains some useful settings for your Wi-Fi router so that it will connect to iOS and OS X devices more easily:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Why does my Mac stay on the white screen when I turn it on?

Why does my Mac stay on white screen when I turn it on?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 4
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 5
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 6
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 7
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 8
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 9
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 10
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Why does a skull come up on the screen when i turn the ipor touch on. it wont go away. how do i get rid of it?

why does a skull come up when the ipod touch is turned on. it wont go away how do i get rid of it?

Someone before you must have done it. Connect your iPod touch with your computer. In iTunes, under Devices, select your iPod touch, click Restore button and set up your device. Everything should get back to normal.

Why does the clear history button disappear sometimes even when I have browser history showing?

as per question.

Is this for the Android build, Firefox 10? If so, my advice would actually be to try the latest Aurora build -- it uses a different user interface altogether and is the new product we're focusing on entirely, which will shortly replace the version you're running.
Try that one and see if the problem still exists there. More info here: https://wiki.mozilla.org/Mobile/Platforms/Android#Download_Aurora

Why does CC say I can 'Try' an app when I have pre-paid 1 year?

I am having trouble downloading apps from the Creative Cloud app on my Mac book Pro.
It says Try where it should say Install.
Why is this? I don't want to have to DL the app from my browser, it kind of defeats the object of having the CC app.
Please help.
Thanks

I believe if your subscription does not include applications it can list them as Try rather than Install. If you are not getting access to what you paid for try contacting Adobe Support directly thru chat.
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

Why does my phone say not enough star age when I have nothing saved on it when I try

I have the 4s 16 g. Everytime I try & download an app, it says not enough storage and I have no pic's. No music. No videos. I also purchased 15 more storage on iCloud and it shows it's available?

I have the 4s 16 g. Everytime I try & download an app, it says not enough storage and I have no pic's. No music. No videos. I also purchased 15 more storage on iCloud and it shows it's available?

Why does my iPod crash to the home screen when I open an app?

My iPod touch has been crashing to the home screen when I stay on aps such as Safari, Facebook, or the App Store for a short period of time. For example, when I go to the App Store to update my apps it crashes right away, wheras in Safari it wll crash after a few minutes of browsing the web.
Are there ways to prevent this from happening?
Thanks so much!

Have you tried the basics from the manual?
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software)

Why does iphoto stay in the background off screen when I open it and won't stay on screen?

Since yesterday every time I try to open iphoto it stays out of sight. I can bring nto view using mission control but I cannot work with it.
I have downloaded mountain lion and iphoto but I still have the problem

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

Why does my cache go up to 600+ kb when I've only visited onr site? This is happening w/ the latest auto update. No wonder I can't connect to anything!

I just noticed this, so it's an addendum to my last question/problem with the "latest edition". Thanks!

Sounds like your wi-fi signal strength has degraded. Try rebooting your wi-fi router, or get it serviced.
Do you have similar issues with any other wi-fi routers?

Why does Installer stay stuck on password enter screen when installing apps?

When installing apps through Installer (from .dmg disk images and .pkg packages), everything works smoothly until it asks me for a password. When I enter it, Installer goes back to the screen before it asked me for the password. When I click next, it asks me for my password, and the cycle repeats. I tried removing my password to no avail. I can install .pkg files from the sudo installer -pkg command. I dont know how to do this for installers that are in app form.

Same issue when trying to unlock locked preference panes in System Settings. Here is the log.
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Got user: DK
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Got ruser: (null)
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Got service: authorization
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_principal_for_user(): No authentication authority returned
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_principal_for_user(): failed: 7
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Done cleanup3
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): Kerberos 5 refuses you
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_record_check_pwpolicy(): retval: 0
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in od_record_attribute_create_cfstring(): returned 2 attributes for dsAttrTypeStandard:AuthenticationAuthority
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Establishing credentials
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Got user: DK
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Context initialised
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Got euid, egid: 0 0
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done getpwnam()
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done setegid() & seteuid()
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): pam_sm_setcred: krb5 user DK doesn't have a principal
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done cleanup3
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done seteuid() & setegid()
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): Done cleanup4
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Apr 20 21:38:13 DKMBP authorizationhost[1834]: in pam_sm_setcred(): pam_sm_setcred: no domain found skipping
Apr 20 21:38:13 DKMBP com.apple.SecurityServer[24]: UID 501 authenticated as user DK (UID 501) for right 'system.preferences.accounts'

Why does it show 54 photos on my About screen, when I have only 9 photos on my iPad mini?

Similar Messages

Maybe you are looking for