Why does it show that FaceTime uses up memory?

Why is it whenever I use FaceTime it says I use memory when I check the time for when a FaceTime call was made? Do I use memory when I call people for FaceTime? If so how do I delete that used memory?

the facetime program on your iphone takes up memory.  How else do you think it can reside on your phone?  IF you could delete facetime (which you cannot because it is built in to the operating system on the phone) then that would free up memory on the phone.  IF you are referrring to the fact that facetime uses data (if your carrier allows facetim eover cellular data) then you can prevent that by only using facetime over wifi or not at all

Similar Messages

  • Why does safari show the last used page when the Ipad is turned on again

    Why does Safari show the last used page when the IPad is next used?

    Read this article:  Open iOS Safari to a blank page, http://www.macworld.com/article/159303/2011/04/ios_safari_blank_page.html

  • Why does BC show that I need to buy live hosting when I should get 5 free from CC?

    I bought CC earlier today and BC still shows that I need to buy live hosting. Why?

    Hey there,
    Reach out to BC support on this. It probably is to do with if you tried to use Adobe BC before with a different Adobe ID etc. There are some FAQ's in the FAQ section on this I believe. But if you reach out to support I am sure they can fix that up for you.

  • Why does VISA show that a non-present device is still present?

    I have NI VISA 5.4 installed and I'm using LabVIEW 2012 SP1 to control a USB HID devices using USB RAW. My computer is running Windows 7 Ultimate 64-bit. Using the VISA driver wizard, I created custom INF files that I have installed on my machine and the actual control portion is working great.
    My issue is that once in a while VISA seems to think that a disconnected device is still present. As you can imagine, this messes with my application as it tries to talk to unit that really isn't there. Using LabVIEW VISA VIs, the device can still be discovered and attempted to be communicated with (it will just error out though). When I open NI MAX, I see the device listed as present even though it is powered off and disconnected from the PC.
    While leaving MAX open, I can reconnect the same unit and nothing appears to change in MAX. The only difference is that now the device is actually connected and powered on. If I connect another unit, I see it populate in the device list. If I disconnect both units, the device I connected last disappears from the list but the first "phantom" device remains in the device list and is listed as present.
    The immediate workaround I've found is to reboot the computer. Things seems to work OK for some time afterwards but will usually crop up again while using more than one USB RAW device in this manner.
    Something else I just witnessed is that I left MAX and LabVIEW open on my work machine over the weekend and I still saw the phantom device listed as present  (it was not connected). I reconnected it and disconnected it and the device properly disappeared this time.
    Has anyone else ever experienced similar issues? Can anyone explain what is going on? Since it is critical that my application can use more than one device at the same time, how can I ensure that the devices that are reported as available for use through the VISA VIs are really there and can be used?
    Thanks!!

    actually, I was wrong.
    I am controlling another device where this behavior is not observed. As soon as the device is disconnected, LabVIEW knows it is disconnected and it will not show up when you use the "Find Resources" primitive in the VISA palette. The other device I'm using will still appear in the found list even it was disconnected.
    For each device a VISA session was opened and USB Interrupts were enabled. The only difference is that the device which "disappears" appropriately when disconnected has a serial number in its serial number descriptor whereas the device which hangs around does not have a serial number in the serial number descriptor.
    Maybe this is a clue to someone at NI.

  • Why does CC show that I have started by 30 day trial of Photoshop when I took out a subscription today?

    I took out a subscription earlier today and installed LR and PS. However CC desktop shows the message, "You started you 30 day trial of Photoshop CC (2014) 11 hours ago." I understood that I would have full access to PS and LR under my subscription with no further purchases needed.

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Why does it show that 4.2.9 is the latest version available when 4.3.4 is?

    I have the newest version of iTunes 10.3.1.55, and I check for new iPhone update and it says I have the latest update. Yet I know there is a newer one.
    I have the iPhone 4 from Verizon. What do I do?

    "Is the 4.3.4 going to be available anytime time soon for the Verizon? "
    No idea.  Apple does not announce such things.
    Since it will get ios 5 this fall,I doubt it, but who knows.
    "Why doesn't it just work for all the phone regardless of carrier?"
    No idea.  Apple does not announce such things.

  • Why does it show my Apple ID is disabled when I try to download puffin web browser?

    Why does it show that my Apple ID is disabled when I try to download puffin web browser. It works for everything else.

    If you still have problem, contact iTune Support
    https://ssl.apple.com/emea/support/itunes/contact.html

  • When I'm in a single story building that has alot of electronics , tvs , iphones cell phones ect- when I use find my iphone why does it show 3 different addresses as well as streets that are blocks from where I really am?

    When going to the gym and launching find my iphone- why does it show 3 different addresses and streets blocks away and then if I move in the building to another area it shows exactly where the phone is?

    Because the earth is large and you phone is getting your location from a satellite miles in the sky and you are under a roof.

  • Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?

    Why when i buy books on my ipad, when i log onto the store it does not show that i have purchased them?
    how many books and songs were therefore lost when i had to wipe my ipad?
    this is SHOCKING from Apple... this is not in my domain of settings!!!

    In the iBooks application on the Mac, there is a checkbox to sync highlights and notes across devices. 
    I don't see a similar setting in the iBooks app on my iPad.  It may require iBooks on the Mac as a mediator.
    Also:
    Can I highlight text and make notes?
    Yes, iBooks includes built-in Highlight and Note features. Highlight any word or passage of text within a book. You can also create a Note from your highlighted selection. Review your Highlights and Notes by tapping the Table of Contents button and then tapping Bookmarks. Highlights and Notes appear in their own section under Bookmarks. 

  • Is it free to send messages in iMessage to another county? if yes why it does not show that these messages from iMessage?

    Is it free to send messages in iMessage to another county? if yes why it does not show that these messages from iMessage?

    if you receive an imessage not on any internet connection you will receive it as a sms (green) and yes it counts toward your texting plan

  • I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer.

    I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer

    What print and paper sizes are you using?  Are you trying to print a borderless print?  Does your printer support borderless for that particular size?  Are you printing to the custom stock size or to a larger stock size?
    OT

  • When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    When i try to export my videos using quick time conversion FCE exits out on me. why does it do that?

    Does it always happen at the same time during the export?
    Can you play through the entire Sequence in FCE without any problems?
    What are your Sequence settings in FCE>
    Have you rendered fully prior to exporting?
    Which export settings did you use?
    -DH

  • HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

    I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

    Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
    It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

  • Why does firefox show up as a plugin on volume mixer?

    Why does firefox show up as a plugin on volume mixer? After updating a flash plugin into firefox (when it had requested me to update it), it no longer shows up as firefox in volume mixer. It now shows up as some plugin icon. I really don't understand this, and wish it to be the firefox icon again. What is going on and what happened? It names itself "Plugin Container For Firefox" What does that mean? It has been this way ever since, and nothing I have done has fixed this. Restarting, refreshing, reinstalling, clearing cache, etc. Can anyone think of something please? :(
    == This happened ==
    Every time Firefox opened
    == This happened just a couple days ago (june 25, 2010 exactly)

    I have this, but my volume on firefox doesnt work at all

Maybe you are looking for