Why does it take 5 hours to export a 7 minute video?

I'm using compressor, with the iPod settings for my footage I took with my canon hv20. I know it's a huge file but it shouldn't take THIS long should it?

Because HDV us a bee-atch?
Patrick

Similar Messages

  • HT5731 why does it take hours to download a 1/2 tv show after it's purchased?

    Why does it take hours to download a 1/2 TV show after purchase?

    Hello allison224
    Check out the articles below, it will give a starting point to troubleshooting the download speeds of a TV show form the iTunes Store.
    iTunes Store: Download times will vary
    http://support.apple.com/kb/ht1577
    Well known TCP and UDP ports used by Apple software products
    http://support.apple.com/kb/ts1629
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Regards,
    -Norm G.

  • Why does it take hours to upload a tv show or movie purchased on iTunes all of sudden?

    Why does it take hours to upload a tv show or movie purchased on iTunes all of sudden?

    Would be due to your network
    Check speedtest.net to verify current speed
    Check istumbler.net or netstumbler to verify any interference
    Make sure you are using ISPs DNS (settings - network - configure DNS - automatic)

  • Why does it take hours to download movies from the iTunes store?

    Why does it take hours to download movies from iTunes store to my ipad2?

    It depends on the speed of the Internet connection.

  • Why does it take. So much longer for YouTube videos to load on my iPad 1st gen. then on my iPod touch?

    Why does it take so much longer for YouTube videos to load on my 1st gen. iPad then on my iPod touch or my laptop?

    This is not the place to make a point. This is a user to user support forum. I do not need instructions about the use and care or alleged failure of cables. At no time did I ever say or imply that you were an idiot, that is your statement and words, not mine. Take the time to Google and you will find instances where there have been injuries and death dealing with 3rd party cables and chargers. The abilities that Apple has for manufacturing and what business decisions they make in creating their products is nothing more than speculation, and that is not allowed under the terms of the forum that you agreed on when you joined here. If you want to rant at Apple, then use the feedback link, www.apple.com/feedback. Other users cannot do anything for you.

  • Why does it take hours to sync and backup a 12GB data?

    Does anyone know why it takes hours and hours to just sync and backup my 16GB iPhone 3GS before it installs the iOS5? This is getting rediculous! Why do Apple force us to use iTunes?

    Shouldn't take that long although waiting a long time in between syncs can create longer backup times...  ie more data, apps, etc... to back up etc...  Make sure both iPad and iTunes are most current versions.  Make sure you are using the iPad sync cord that came with the device and not another from a iPhone or iPod.  Cables can screw up the deal.
    Start there first and let us know how it goes.

  • Why does it take hours to import mp4 files into iMovie

    I have some home movies I imported from VHS-C and compressed to mp4 files and now I want to start going through them in iMovie but it takes hours just to import a single clip (~575 meg).
    What can I do to speed this up? Would getting a Mac Pro with loads of RAM and CPU's help? Would converting to a different video format before I import work?
    Right now I have all this video I converted to digital and thus far spent days just importing and haven't been able to do anything with it yet!
    I'm using an iMac core duo with 2 gig RAM and the upgraded video card (best one they had at the time).
    Any help is appreciated!

    This worked fine for me, was exactly what I wanted.
    1 - Create the project in iMovie HD and then save and close.
    2 - Locate the file on your computer. Ctrl-click on the file and it will say "show package contents". Click on that.
    3 - You will then see some folder items inside that. Open up "Media" and then drag and drop your mpeg file into it.
    4 - When you reopen the project, you will be notified that there are files in your trash. You want to view them to find the file you just moved there.
    5 - Take that file and drag it back onto the project and you're in.
    A major blessing!

  • In attempt to burn blu-ray, I get QuickTime error 0.  Takes hours to export a 7 minute movie from timeline, then get notice it fails.  What's going on here?

    New problem just started 24 hours ago.  When I try to export from the time line to create a QuickTime file, a 7 minute movie on time line takes 3 hours to export and then the export fails, where as a few days ago, that export would take about 10 minutes at most.  I get the same failure notice when I try to share to blu-ray, DVD, or Vimeo.  Tried to use compressor, no such luck as compressor failed to make a .mov file.  I get QuickTime error 0 message about 5 minutes into trying to share to Blu-Ray now.   Does anyone know what is going on here?  I'm running latest update of Snow Leopard on an intel Mac Pro and the latest update to Final Cut Pro X.  I've also installed QT 7.6.6 to use in creating time lapse movie files.

    Same problem here, too. Final Cut Pro X 10.0.3 on OS 10.6.8. However, it is only doing it on ONE of my projects. A 4-second test project burned successfully.
    I'm  actually going to use iDVD to burn copies for a few people, so I only need the movie file from FCPX.
    Would someone please post best export settings for use on a DVD? In FCPX, the project is  in HD (1080p) with all media optimized to ProRes 442. I know it will have to be down-sampled to DVD resolution, but I've always been curious to know what settings will result produce the best possible quality in DVD resolution.
    Thank you!
    Bart

  • Why does it take so long for FCPX to render video for the various Apple Devices?

    It took 12 hours from FCP X to share 1 hour of video for iPad. It took over an hour to share a 3 min. video from FCP X via the new Compressor for iPad. It takes appreciably less time if I choose the DVD option (which now gives an error message in FCP X) or export as a Quicktime video.

    Only an idea but 1.4Gb to 22.5Gb hmm well that may take a while as it's having to make the file bigger add information to it? But the bigger the file to a smaller size the longer things will take. Always use compressor though it's a professional compressor well the last version was anyway and your MacBook Pro is fairly powerful. do you have it plugged in when performing tasks like these as It may be that performance is reduced slightly to conserve battery life but I'm not 100% sure on that but if you haven't I'd give that a go.
    J

  • Why does it take so long for a you tube video to load??

    when I try to play a video on you tube or on facebook, it just sits and spins. It takes about 20 minutes to play a one minute video! Can anyone help?!

    Not on the LAN - traditionally internet speeds were rate limiting - these days it's possible the LAN connection is especially with multiple wifi signal paths.
    Unless some app is transcoding the camera video on the fly I'd be surprised if LAn slownwss alone would cause these issues.
    What's the camera and what is the recorded video format?
    AC

  • Over 2 Hours To Export a 10 Minute Video Even With Other Editing Software

    Hi, I am having a problem with EVERY edititing software I have used. Recently that is. Anyway heres the deal. I got a new computer and it has been an amazing PC. It has a sticker on the front that says HD video editing as in it supports it. Which it very well does. Within the last couple weeks, I have had problems with editing my videos. I usually render 5 to 15 minute videos since I do YouTube. That would take between 10 and 30 minutes. Now, these videos are taking almost 3 hours give or take just to finish rendering. I have no idea why. It all started when I changed the settings in MSCONFIG to have maximum memory. I restarted my PC and got a hardware error. So I went into safe mode and undid what I had done. I also took out the RAM, and CPU to see if that was a problem. I then put it back in of course. I don't know every knick and cranny of Adobe premiere so please be very descriptive. I also remember that I was having trouble with the fan of my CPU. I couldn't get it to lock back down on the mother board. Could that be a problem? It isn't lock in on all 4 parts. Only 2 I believe. Any help is appreciated. Thanks in advance.

    Dumb me haha, I didn't even think of puttin in system info. I believe thats what you were asking? I am using Adobe Premiere CS6. I don't know what version though.
    My system specs are as followed
    Pentium Dual Core CPU E6300 @2.80GHz 2.79GHz
    RAM: 4.00 GB
    64 Bit Windows 7
    Nivida Geforce 210 Video Card
    The video files I render are M2TS and they are recorded with the Haupaugge Colosus @ 1280x720 in Arcsoft Total Media ShowBiz.
    I render them with adobe premiere in H.264 in 1280x720 @29.97 FPS with a Bit rate of 2MB/s

  • Why does it take hours to backup my iPad?

    Why is it that when I try to back up my iPad the backup starts alright but after a short while it seems to grind to a halt. I have made it a habit to monitor the affected folder on my MacBook Pro and it is pretty clear that, although the backup indicator in iTunes keeps on spinning, the backup files remain unaffected after the halt. My present attempt, for example, has now been going on for two hours and 45 minutes without any indication of it coming to an end.
    My solution to this slight inconvenience is to delete the backup file from within iTunes and create a completely new backup. This, however doable, is not too convenient because it takes some extra time to do this.
    So what am I to do about this. Should I just patiently sit tight and hope for the backup to complete (hoping it will) at some undetermined future point in time? Or is there any other way of coming to grips with this?
    Johnny

    Shouldn't take that long although waiting a long time in between syncs can create longer backup times...  ie more data, apps, etc... to back up etc...  Make sure both iPad and iTunes are most current versions.  Make sure you are using the iPad sync cord that came with the device and not another from a iPhone or iPod.  Cables can screw up the deal.
    Start there first and let us know how it goes.

  • Why does it take hours to download movie

    It takes 5-8 hours for me to download a movie either to purchase or rent, does anyone know who or how to fix this?

    You most likely need a faster internet connection.  What do you get with a speedtest app?

  • Why does it take hours to download a rented movie from iTunes.

    When I rent a movie or TV show from iTunes with my AppleTV (2), the download starts and I get a message saying the download will take an an hour and 45 minutes to download.  Then when the download it complete and I start to play it, I get a message saying downloading - and the rental never starts. 
    My AppleTV (2) it running the latest version, and it's plugged directly into my router via ethernet.  I have reset the Apple TV, router and modem.
    Netflix  and YouTube streaming through AppleTV are immediate and seem to work fine.

    What is your actual internet speed? use www.speedtest.net and post the results.
    A sustained 6 Mbit/s or faster Internet connection is recommended for viewing High Definition movies and TV shows, and a sustained 2.5 Mbit/s or faster Internet connection is recommended for Standard Definition content. Internet connection speeds may vary depending on your ISP and other factors.
    Using Netflix or Youtuve is not a good test as Youtube is must lower quality than HD rentals, and Netflix uses a variable quality download system that reduces quality based on your internet speed.

  • Why does it take hours to download a movie on Apple TV?

    Recently I rented a movie on Apple TV, but it took ~5 hours to download it to my chagrin. Is that normal? Later, I down loaded my second movie rental (3-hours), watched a portion,came back to resume viewing, and had to slowly down load it a second time. Wha' hoppened?

    What is the actual speed of your conection (www.speedtest.net)
    8mbps required for instant 1080P
    6mbps for 720P
    Check istumbler or netstumbler for network interference
    Make sure you're on your ISPs DNS

Maybe you are looking for

  • Nulls and Empty Strings

    I have an ODBC application whose backend has been changed from Access to Oracle. There is one particular query that is causing problems. The query contains a where clause with something like "field = ''" in it. This query is intended to pick up recor

  • Customer creation in R/3 from PI data using IDOCs

    Hi All, I am creating customers in SAP r/3 system using IDOCs which are coming from PI system in the form of XML files. For that DEBMAS and ADRMAS message types and DEBM process code is used for creating or changing customer master data. Existing fun

  • File attachments on Mobile Devices

    I created a simple test form with a file attachment button. It works in my PC browser, but hitting the button does nothing on my Android device. Is file attachment not supported on mobile devices and smartphones?

  • BED n other Taxes not Displaying in Purchase Order Printout.

    Hi MM experts........ I had done the CIN configuration settings, system is calculating the tax correctly, but the problem, If I take a printout of Purchase Order its not displaying any taxes like BED, Ecess and SEcess. Can any one tell wht configurat

  • Wrong Case or ClassCastException

    Hello everyone I use JWSDP2.0, JDK is jdk1.5.0_12 I have tried to generate class by the command: xjc -p test.jaxb poll.xsd Following is the schema <?xml version="1.0" encoding="UTF-8"?> <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" element