Why does Jaws works with the project when previewed in browser but does not when it is published?

I am using Jaws 15.0.110024 and Captivate 8 in windows.

Perhaps you need to add the published location to the list of trusted locations for the Flash Player?
Click here for info on how to do that
Cheers... Rick

Similar Messages

Does iPhone work with the Apple Hi-Fi speakers

Thinking of buy the Apple Hi-Fi speakers. Does it work with the iPhone?

Neil is correct, it does work, a previous version of the firmware had some problems and could trigger the warning message you refer to, suggesting airplane mode. In fact, airplane mode is a good idea because the GSM interference will be really loud on the HiFi.
The HiFi has been discontinued, have you been able to find one?
Message was edited by: deggie

Does this work with the macbook?

does this work with the new macbook?
Apple Mini DVI to Video Adapter
http://store.apple.com/Apple/WebObjects/ukstore.woa/6644042/wo/Dg4BvxbpYG2k3zYlb 4c1UxPXhbI/8.0.23.1.0.8.25.7.11.0.3
it dosent state the macbook though

thanks just got 1

GoPod - Does it work with the latest Ipod firmware?

I have a 5th Gen 60gb iPod and have used goPod in the past to remove the volume cap. But ever since updating my iPod with the latest firmware the volume limit seems to be very quiet compared to what it used to be. Is this because goPod 1.4 doesn't work with the latest firmwire?
Has anyone else had this problem or is it just me going deaf?
Cheers

I disagree with that rudolfraith.
When I plug my iPod in, launch goPod and then press uncap, it does say that it is now uncapped, but the volume limit is no difference at all. I even tested this by hooking my Ipod up to my PC and recording it capped and uncapped, the levels were exactly the same.
So I feel that goPod v1.4 doesn't work with the latest firmware.

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Does itunes work with the new intel core duo processor?

i want to go buy a new laptop and the one I have in mind has the new intel core duo T2300 or the T2400 processor. Can i still download itunes onto this computer? Does it meet the requirments becuase the download page says you need a pentium or BETTER? The new macs are putting them in their computers, but will the windows and intel duo be able to support the itunes application?

are you asking if it is compatible meaning will it
install/run or are you asking if flash is
optimized to take advantage of this particular setup?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
BAT06 wrote:
> I am currently looking at up grading to a new pc but
have heard that the new
> Intel Core Duo Processor isn't compatible with Flash or
Studio 8?
>
> Has anyone got a PC running with an Intel Core Duo
Processor, and if so does
> it work with Flash and or Studio 8?
>

Does iWeb work with the new Apple System?

I am thinking of buying the new iMacs but wondering if iWeb will continue to work with the new Apple system.
Does it?

Thank you everyone! You all have been a big help and I have copied the links suggested.
It's been a while since I last used the community. I later remembered to type in key words and found others with solutions too. So, extra big thank you for responding so quickly and Happy Holidays!

Firefox does not work with the USPS self ship web site. Will not allow printing of postage labels.

Some months ago, user "junkbondman" asked this question somewhat poorly, and partly as a result got a non-responsive boilerplate answer by someone who did not read the question's key (if cryptic) point:
> Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
That's too bad, because 16 other users identified "HAVE SAME PROBLEM" - as had, no doubt, a large majority of the 677 viewers of the question. However, maybe to get a better answer we need to start with a better definition of the problem.
The way that the USPS site <cns.usps.com> works to print a label is that addresses (return and forward) are defined, the package weight and value are specified, and then a shipping mode is selected before paying and printing the label. The shipping mode is selected in a section titled "Select a service type", via an embedded table using a vertical scroll-bar that Firefox cannot handle. [Firefox is not alone in that. For example, Safari under iOS cannot scroll the embedded table, but USPS provides a mobile app which mitigates that problem by presenting the table differently.]
Now, it should be stipulated that the table is the worst element in a bad page that does not begin to pass W3 validation [71 errors, 19 warnings - looks like government work]. However, other browsers (like Google Chrome) handle that table with apparent ease. The question is whether Firefox should be able to do so - and, if so, how? As of Fx 33.0, this still does not work.
NOTES:
(1) Unfortunately, to examine this problem requires setting up a USPS account in order to see the shipping page. Setting up the account is easy, but it is a small extra burden to examining the problem.
(2) The problem has been reported to USPS, but has elicited no sign of intelligent life.

''I get the "pointer" mouse cursor when mousing over the blue bar, and I can click on it and scroll the contents as with any other scroll bar, but the bar doesn't move up and down in sync with the content being scrolled: it just stays put. If I do not slide straight down, the blue bar may twitch a pixel left or right.''
Great description! - sorry if you implied that earlier and I misunderstood, but I think that description adds crucial details:
* must hover over the ''blue'' part of the bar (representing the visible part of the table) and
* get the "selector" cursor (the pointing finger), then
* hold that click while scrolling (inside or outside of the table doesn't matter, as long as that click is held) to the needed table row, then
* release the click, and the table stays in place to allow a selection.
Most pages with an embedded scrollable input form (like the box I'm typing in on this page) do not change to the selector cursor when hovering over ''any'' part of the scroll bar, either ''blue'' (representing the visible part of the input form) or ''white'' (the invisible part of the input form). And it is common to click in the ''white'' part of the bar as a way of saying "show what is not visible". You can't do that with these USPS input forms, which behave differently.
Now, even with this method, that remains a very unintuitive (because the scroll bar does not reflect the position, and because the actual ''selections'' never get the "selector" cursor) and awkward way to work, so there is no visual feedback on either part of the operation.
And, I must try to understand why some browsers treat this differently. For example with Chrome (like Firefox), the cursor changes to "selector" in the blue part of the scroll bar, but not in the white part, but with Chrome (unlike Firefox):
- a ''click'' in the white ("invisible") part of the scroll bar or
- a ''drag'' on the blue ("visible") part of the scroll bar
causes movement in the required direction - altogether more intuitive behavior.
Bottom line: At least there is a way to make this work with Firefox, but it is awkward, to say the least. It will require a lot more thought to think about:
* how and why some browsers handle these non-standard input forms with such intuitive behavior (that is, behavior that is familiar in more standard input forms),
* whether the fact that Firefox is less accommodating in that regard is a reportable bug, or whether Firefox should not have to worry about sites (like usps.com) that can't be bothered to comply with standards.
What do you think about those questions?

Why Wont GPS Work with the Nokie 5530 + Nokia LD-4...

Ok, ive played around with all the settings, etc. The only lights being displayed on the ld-4w gps module are the green light and the blue light. the gps light is not turning on. it is all paired with the nokie 5530 phone.
Ovi maps is installed, all the firmwire is updated.
When i start the application 'Location' (the one thats included with the phone), it says searching for GPS devices. Then it says 'Waiting for gps', then (nearly instantly) it shows 'GPS Not Availible' and exits. After that it displays 'No Connection'.
I have tried by going into my back garden and doing this but it still does not work.
However, when I use ovi maps and type in a route, it displays 'Waiting for GPS' for a long time, then it does not connect either, but then it also asks for an internet connection, which i dont have as i dont have any credit on my phone, and i also dont have wireless internet.
If this is the problem, then why doesent the gps light on my ld-4w even blink?
Please help, i need this GPS module up and running before my sisters birthday party lol (17th april)....so please help..its urgent!
Solved!
Go to Solution.

Woohoo!! I finally got this working...what I did was I held the power button down for about 10 seconds until the lights alternated between green and red, and then i turned it back on again. Then while holding the power button down, i plugged it in the charger.
Then i turned it back on again, and paired it with the 5530xm again, and it showed waiting for gps for about 5 mins, then it displayed some co-ordinates! Then i started ovi maps then it showed my location!
Yeeeaaaahh!! it finally works!! Looks like it wasent nokias fault after all!!

Does smartfix work with the trial of pre elements9?

If've downloaded Premiere Elements 9 (german) to see if it will fit my needs. Especially the automatical fixing problems seams to me to be a great thing. But now starting a HDV 1920x1080 project, adding and analysing tracks (wich have smart tags now, like shacky, low audio and so on), I don't get ask if I want to fix the problems if I drag them to the timeline. Neighter can I select the Smartfix entry in the context menue after right clicking on the scene in the timeline.
So is smartfix eighter not as good as promised, or is it disabled in the trial version?

On the forum at Premiere Elements support site http://Muvipix.com, someone else reported that the Smart Fix feature does not seem to work with AVCHD Lite files -- although it does with AVIs.
So, apparently, this function is, for some reason, limited in the files it can be applied to.

Does it work with the Octava toslink 4x1 HDMI switcher?

Anyone using atv with the Octava 4x1 HDMI switcher? I'm reading reports of non-functioning HDMI switches. That would suck.

Kevin Key wrote:
I just installed the 3.0.2 firmware upgrade and I still can't get my Apple TV to transmit HDMI video to my TV via my Sony STR-DH500 receiver. All other components - Blu-Ray player, Scientific Atlanta cable TV converter, and Acer laptop work just fine with the HDMI switch in the tuner.
AppleTv is notoriously fickle with some switches/AV receivers over HDMI.
Question is whether this is due to an over rigorous HDMI implementation by Apple but it would seem odd that other manufacturers just had lax implementations.
Apple TV works when connected directly to the TV, but I really don't want to have to keep swapping HDMI cables.
No, I agree very frustrating. HDMI great when it works!
Have you considered connecting via component to the TV/receiver and analogue or optical audio ?
Is this lack of compatibility due to heavy-handed anti-piracy measures on Apple's part?
Doubt it, it happens with unprotected material presumably too.
Apple TV is the first Apple product I've ever owned, and will likely be the last. There's one good thing about Apple TV: the interface is awesome.
Yes, makes up for lots of other things.
But, I should be able to connect it via an HDMI switch, shouldn't I?
Yes, it's not necessarily AppleTV at fault but when other devices all work it certainly suggests it's the problem.
And Apple won't give me any support over the phone unless I pay $49?!
I wouldn't bother I doubt you'd get anywhere other than being advise to try a different switch or plug into your TV.
Is anyone else having this issue?
Yes, with certain device pairings several posts comment about this.
While some non mainstream brand switches might not be implemented well you'd expect Sony to be ok.
Is there anything else I should try?
Apart from component no.
Is there a hack that can fix this problem?
No.

Does Airplay2 work with the new 2G Nano?

I am going to pick up the new 2G Nano (8GB model) today, and I'm looking for a good FM transmitter for it. I currently have the Transdock Micro for use with my "old" 1G Nano, and I'd like to have a transmitter that does not have to be plugged into the charger, but I like the idea of being able to plug in a seperate DC charger for the really long trips. (I know, I'm picky).
I was just wondering if anyone has tried the AirPlay2 with the new Nano yet, or if anyone has any other suggestions for me? I sent an email to XtremeMac about this and am awaiting their response, but I'd like to hear some real-world experience from you guys on here.
Thanks for the help!
cwguth
MacBook Pro 2.0Ghz, 2GB RAM, 100GB 7200 RPM HD Mac OS X (10.4.5) iPod Nano

Hey!
I've got the Airplay2 for my 30Gb.It works fantastically well,very seldom do I need to re-tune it,works well in built up areas too!As for the Nano,not sure about that.I tried it on my wifes "old" 2Gb Nano,could'nt get it to work though!
It is supposed to,the incar holder for the Airplay actually supports the Nano and allows you to also plug your charger in whilst installed in it.Very neat.
Chers,
John

Does Expose work with the wireless keyboard?

I've been trying to use Expose with no luck. I hit F9 and I either fast forward through a video or nothing happens (depending on whether iTunes is on).
I've opened Expose in preferences and confirmed the keys, even changed them to see what happens. Nada. I can only think that it might have to do with the wireless keyboard. I do have Expose set for my mouse but when I deselect that it doesn't change the fact that I can't access with my F buttons.
What do you think?
Cheers,

Julien-
I have the Apple MC184LL/A Bluetooth Wireless Keyboard. The brigtness control works with mine, as do most of the other functions.
Try cycling the keyboard off and on. Hold the power button until the green LED goes out. Then press it one more time to turn it back on.
You might try resetting the iPad's network. Go to Settings-General-Reset-Reset Network Settings. Then you may need to reconnect your WiFi and Bluetooth.
If that doesn't help, try resetting/rebooting the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart in a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

Will the iphone 5 digital av adaptor (lightning to hdmi) work with the projector input on my new Sony PJ780VE Videocamera when I connect my iPhone 5 to it?

Hello....I am new here...first posting.....I have recently bought an iphone 5 and also a new Sony PJ780VE camcorder but with a built in projector that allows external input. I am wondering if anyone knows whether the iphone 5 lightning to Digital AV (HDMI) adaptor will work with this Sony projector input okay if I go ahead and purchase the adaptor from Apple. The reason I ask is that I read on the net that Sony are announcing an adaptor for iphone 5 to allow this connection....at least that's my understanding of this....so do I need a proprietary Sony adaptor to facilitate this connection???

i have the same problem but had nothing to do with an update, it worked christmas day charged overnight and didn't work the next day

Does firefox work with the Hypersnap-Dx pro for screen captures. I can't get it to work with scroll option??

I have been using Hypersnap dx pro for awhile now with firefox but it won't work with auto-scroll to get the whole page. Thanks.

A mouse, which is a pointing device, will not work with an iPad...there is no cursor for the mouse to move around. You must use the touch screen.

Why does Jaws works with the project when previewed in browser but does not when it is published?

Similar Messages

Maybe you are looking for