Why does Lab View add control elements to some driver VI's!

Hi,
I have downloaded a driver project that was developed with Lab View 2009sp1. Now I will this project use with LV2010.
To do this I have the library installed in instr.lib. But when I opened some VI's I discovered that Lab View have added control elements.
Why is it so and how can I stop this behaviour?
Solved!
Go to Solution.

Surely that didnt just happen because you saved it in 2010. You downloaded a new set of drivers for 2010 from here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=AFAA2CBD85041C96E04400144F1EF8...
The second driver has more features.
Also, note that the two modes are different, in the second case you are specifying the current where as the first one is a constant current configuration for the load.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Similar Messages

Why does Adobe Acrobat now control the photos on my pc?

Why does Adobe Acrobat now control the photos on my pc?

Hi,
Thank you for your reply.
After I downloaded Acrobat, Adobe Reader tries to control viewing of my photos. When I plug my digital camera into the PC, all the files are labeled “PDF”; the files still have the .jpg extension, though. For photos on my PC, when I try to open them, Adobe reader insists on opening them, but it can’t, and I get the message:
“Adobe Reader could not open photo.jpg because it is either not a supported file type or because the file has been damaged”
I attached several photos to an e-mail that I sent after downloading Acrobat, and I could not open the photos before sending the e-mail (in order to verify that they were the correct photos before I sent the e-mail). Adobe Reader was my only option when I clicked “open” to view a photo, and it would not open the photo.
I assume that I did something during the Acrobat download process that has caused this situation. My plan is to uninstall Acrobat and then re-install it and this will hopefully remove this situation.
Any suggestions you have about this situation would be greatly appreciated.
Doug McLean
469-766-9679

Why does selecting "help" in Premiere Elements give me a http403 forbidden message?

Why does selecting "Help" in Elements Premiere 11" give me a 403 Forbidden message?

I have looked at hosts file.
If I understand your suggestion correctly, I have compared my hosts file entry with the link you provided:
http://1.bp.blogspot.com/-Zyw0c7iJGJs/Uz9A3uyRpMI/AAAAAAAABZo/6s9KihpCW0I/s1600/hostsfile. JPG
and they appear to be exactly the same.
[PS: Could an issue here be that my version of PE (11) is not the latest version (13)? (Or should using PE11 still permit use of the "Help" feature, without a "403 error" ?)]
From: A.T. Romano <[email protected]>
To: Don Giger <[email protected]>
Sent: Wednesday, October 29, 2014 3:09 PM
Subject: why does selecting "help" in Premiere Elements give me a http403 forbidden message?
why does selecting "help" in Premiere Elements give me a http403 forbidden message? created by A.T. Romano in Premiere Elements - View the full discussion
DonOma
Let us look at the hosts file and inspect its content for unwanted/unexpected entries.
STEP 1
Find the hosts file. In Windows 7, 8, or 8.1 64 bit, the hosts file is found in the path
Local Disk C
Windows
System32
drivers
etc
and in the etc Folder is the hosts file
STEP 2
Right click the hosts file, select Open, and then Notepad. Open the hosts file's Notepad document.
Do you see anything below the last line in the default hosts file as shown in the screenshot?
(Always backup the hosts file before editing it.)
http://1.bp.blogspot.com/-Zyw0c7iJGJs/Uz9A3uyRpMI/AAAAAAAABZo/6s9KihpCW0I/s1600/hostsfile. JPG
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6880653#6880653
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why does my usage add up to 9 but remaining is 18 on a 32 gb mini

Why does my usage add up to 9 but remaining is 18 on a 32 gb mini

You did not add in "Other".
What is "Other"
1. Cache for apps, browser, mail, Messages, Reading List
2. Saved games
3.Documents and data
4. Notes
5. Voice Memos
You can backup and restore to reduce "other" but they will start building up over time.

Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??

Why does the view window all of a sudden expand the content of the page I am viewing so that I have to go to "view" and click actual size??
Then a few minutes later, it goes back to expanded again, it is driving me crazy. how can I stop this????
Thanks for any help.

There could be a number of reasons, first thing to check is if you are clicking Command + or Command -. The Command 0 keystrokes restore Safari to the actual size. You can also reset Safari by Safari - Reset.

Why does the i5 add a contact to my contacts list for every person I have ever emailed? My 4 didn't.

Why does the i5 add a contact to my contacts list for every person I have ever emailed using Outlook and Gmail? The i4 didn't have this issue.

Hi drewskiiiiiiiii,
If you are having issues with your iPhone's Contacts application acting oddly, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Using lab view to control an Arduino led cube

Has anyone used lab view to control an Arduino led cube? It seems to me that you could make a pretty awesome project out of the two.

Hi there, I haven't done it my self but, you may find a tread at the LabVIEW Interface for Arduino Group including links to download the LabVIEW Interface for Arduino Toolkit . I think this will make the task easier. Good luck!
Alejandro | Academic Program Engineer | National Instruments

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Why does cloud logo not appear next to some songs in my iTunes library? Does it not save them for some reason?

Hello!
The cloud logo means that you purchased these songs from the iTunes Store but haven't downloaded them to your computer yet. If you want, click the clouds to download the songs and the cloud logo's will disappear for those songs too.

Create test sequence from lab view - add it to the .seq file

Hello All,
I have a query. consider an test sequence that has already stored in "Test.seq" format. let us say we have 5 test steps.
now is it possible to add a new test step to this existing test sequence using Lab VIEW. I mean if we enter a new test step this has to reflect in the existing test sequence "Test.seq". i.e in the "Test.seq" we must have 6 test steps.
If this is possible let me know how this can be done.

Michels,
Guenter mande a very good point. Make sure to take a look at the forum thread he linked to see the licensing implications of creating your own Sequences.
There is a very good forum thread that discusses how to create steps programmatically. You can find the forum here:
http://forums.ni.com/ni/board/message?board.id=330&message.id=7785&requireLogin=False
Regards,
Santiago D

Completely new to lab view and need to get some stop watch help please

OK I am new to lab view so please be patient with me. I have a need for a stop watch that is triggered to start when two voltage values differ by more than 0.110V and then stop counting when they return to within 0.110v my goal is to capture the total amount of time the two voltages differ and record it along with the rest of the data is this possible and how would I do it? Thanks I am running 8.5

danger831 wrote:
thanks for the quick response but thats not really enough info to help me as I am very very unfamiliar with lab view and have only been using it for a few days(mainly just plugging in copied sections) so hopefully someone can give me a little more help. But the good news is I am now looking into taking one of the Lab view courses but that probably won't help me with this problem this week. thanks again for your help
For starters, try to write the name correctly. It is LabVIEW, not lab view.
Seriously though, your best way of learning to is try some things yourself first. Look through the examples that ship with LabVIEW for the components Raven suggested (while loops, shift registers, etc.) We could give you a working example but you will learn far more by trying things for yourself. As suggested, try a few things and then post what you have done and what you are having trouble with. From there we can answer your questions rather than just do it for you.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

When creating keyframes on timeline, why does it sometimes add bezier handles and sometimes not?

OK, so one of the key steps in my workflow is to do a pass of manual audio 'normalization'. Yeah, I keep getting the feeling that there might be automated tools that could do a better job, but I'm also listening for content.
But what is driving me a little crazy right now is that sometimes, the ctrl-click adds a normal keyframe and other times, it adds a control handle for a bezier curve. This is especially frequent when doing speed ramps, but it's just so inconsistent that it drives me nuts.
I am working on one timeline and halfway through the sequence, it comes to a clip where it ALWAYS adds bezier curves. And when I try to drag the keyframe down, it grabs the bezier handle instead, creating this bizarre S curve.
I just don't know what I'm doing differently in that segment compared to other places. Hundreds, if not thousands of edits like this and I haven't come across a problem like this.
Undo, and do it again causes the same thing.
But one segment over, creating keyframes doesn't create any bezier handles.
Production Premium CS6

This is helpful as it explains why suddenly there are a few in a row that are bezier.
But it doesn't explain what it is that I did to make them bezier in the first place. It just seems random. I'm just control-clicking on the timeline.
When I get back in the office, I'll check on this a bit more carefully.

Why does the straighten tool in Elements 11 freeze when I try to use it?

When I click on the straighten tool and then click on a horizontal line on my photo, as I attempt to draw the line across the photo it freezes after a fraction of an inch and rotates the photo before I've drawn the line along the horizontal feature I'm using and it's always wrong. I had this problem with my downloaded trial version of Elements 11 and it appears on the version I purchased in the store today.

I was able to replicate this problem and believe it may be a bug, although I did find a "workaround".
The straighten tool was only drawing for a very short distance and then I would no longer see the straighten line. Of course, this prevented me from using it properly. I followed the suggestions in this thread and reset the preferences. The Straighten tool worked normally until I enabled the ruler under the View settings. Once, the ruler was enabled the straighten tool started doing the same thing it did before. I turned off the ruler and it started working normally again without re-opening the program. I tried the ruler both in the default inches measurement as well as pixels (my personal ruler preference).
The workaround would be to turn off the ruler while straightening. However, I hope this is fixed in a patch. I didn't have this problem with Photoshop Elements 9, the last version of Elements I had prior to upgrading. For the record, I'm running Windows 7, just installed Photoshop Elements 11 and immediately downloaded the updates, which I believe was just the Adobe Raw 7.3 update.

Why does List E .add take an E, but remove take an Object?

The various add methods of the java.util.List<E> interface take an object or collection of type E, but remove(Object o) is generalized. Why is that? And how do non-E objects get into the list?

Moreover, imagine doing something like this:
list.remove(methodXyz(someArg));
if methodXyz returns a reference of type"supertype
of E", you'd have to add a cast first beforecalling
remove; unnecessarily so.But a superclass of E cannot be added to a List<E>;So what? methodXyz can still return an instance of E, using a reference of type Object e.g.
only an E or a Collection<? extends E> can. So (as
long as I'm redesigning a fundamental interface :)
maybe it wouldn't be a bad idea to require the
downcast to be explicit.There is no problem whatsoever with not having Generics applied here, and in some cases it might be more convenient not to do it. So why do it then?
that the interface's remove takes an Object. Since
remove(Object o) is designated as optional, is there
any reason that I should provide it?Maybe you need it one day...

Why does Live View not work with the following: @media only screen and (max-width: 480px)?

When I use the above media query in my stylesheet Live View ceases to update the viewport. I have to update it manually each time I add or change a style. This is not the case when I use styles under a common tablet sized query @media only screen and (max-width: 768px), or when there is no query at all. Is this a bug or is there something I am missing here?

Code errors might account for the discrepancy. Validate your code and fix any reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Why does Lab View add control elements to some driver VI's!

Similar Messages

Maybe you are looking for