Why does labview 2009 32-bit closes up with no error message?

Hello.
I am developing an application using a PCI-6534 board, Windows XP SP3, and LabVIEW 2009 32-bits. In this application I am generating a 300 Hz signal using the P2.0 digital line. I am trying to make digital acquisition using the P0 port (8 bits), using N-sampling. The program that generates the 300 Hz clock, works with no problem. However, when I start running the program that performs the data acquisition, LabVIEW suddenly closes up with no error message. The LabVIEW windows just disappear from the screen.
As for me it looks like a LabVIEW bug.
In case anyone decided to help me, I could attach the programs so that you could check them.
What can I do to solve this problem?
Thank you.

I had the same problem with one of our applications. I supplied gigabytes of process monitor and desktop execution toolkit logs, but nothing was resolved. I upgraded from WS2003 and LV2009sp1 to W7 64b and LV2010, per NI's recommendation but the problem persists. I had the corresponding service ticket open for 3 months where NI said the application ran fine for them on W7 with 2010. (long story)
I understand your frustration, and I recommend getting your local application engineer involved as an advocate with application support.. If you pay for service, pound on them to provide it. My $0.02.

Similar Messages

Why does LabVIEW 2009 revert to the old icon editor?

Hi,
I have noticed that sometimes when I am trying to edit the icon in LabVIEW 2009, I get the old style icon editor from LabVIEW 8.5 days instead of the more advanced new one with layers, gliphys, etc. Once the old style editor shows up, there doesn't seem to be a way to go back to the advanced editor. Has anyone seen this behaviour? I have version 8.5 of LabVIEW still installed, should I remove it? Do I need to restart my computer?
Thanks.
Bob

Here are some of the errors I see ...
Attachments:
ScreenShot057.png ‏18 KB
ScreenShot058.png ‏112 KB
ScreenShot059.png ‏125 KB

Labview 2009 32 bit not running on xp 64 bit

Hi all,
I tried to upgrade to LabVIEW 2009 from LabVIEW 8.6 on 64-bit windows XP machine. Following about a 2 hour removal of 8.6 and subsequent installation of LV 2009 it turns out that the device drivers are not compatible with a 64-bit machine. On launching LabVIEW 2009 (32-bit) an error box appears stating that it is corrupt or missing files and to correct this using control panel etc. I have tried this and still the same error occurs and LV refuses to start.
All the license files are correct and the compnents are activated.
Anyone know how to fix this? Or should I go back to 8.6 and cancel my upgrade subscription?
Secondly, I am using a firewire camera and was informed that Ni-IMAQ legacy are no longer supported and to go to ni.com/ifo and enter legacy1394 to see how to download drivers etc for this. I end up on a page that says "not authorized".
Any help gratefully appreciated.
Solved!
Go to Solution.

Leeser wrote:
I agree that XP64 and LV 2009 are not compatible as I installed LV 2009 on another 32-bit machine with no problems. I was just surprised as there were no problems or issues that I came across for 8. on XP64. Ah well, a uninstallation and reinstallation lies in wait for me on Monday morning!!
As an aside why call it LV 2009 instead of LV 8.7 or even LV9.0...sounds reminiscent of an operating system!!
Regards,
Leeser
LabVIEW 2009 is according to the internal version scheme actually equivalent to LabVIEW 9.0. Why they changed the naming? I guess marketing told them to do so. Why then? Well marketing has some funny ideas sometimes. I guess since THE software provider in this world has started to do this since about Windows 2000 someone must have thought it to be the best idea since sliced bread and decided to do it for LabVIEW too.
Another guess is that in about 2010 there would have been something like 9.1, and 10.0 would then come out in 2011 and that sounded somehow to someone like a bad scheme so they decided to change it now. But maybe it will be forgotten and everybody returns to the old versioning at the begin of next year when 9.0.1 will come out, which would then otherwise be LV 2009.1??? Or maybe LV2009 SP1?
It has already happened with LabVIEW 6i (iMacs, iPhones, iAnything), LabVIEW 7 Express and LabVIEW 8.20 (following 8.0.1 and marking the 20th anniversary of LabVIEW, and being internally LabVIEW 8.2). All some marketing fun or hysteria.
Rolf Kalbermatter
Message Edited by rolfk on 08-17-2009 11:08 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Why does Labview allow a cursor in a indicator?

Hello,
Why does Labview allow the user to position the cursor with the mouse inside a numeric indicator? Users think that just because they can put a cursor they should be able to type something and enter data. Is there a way to disable/stop the user from putting the cursor in a numeric indicator?
Regards,
Kaspar
Solved!
Go to Solution.

Disabling the indicator satisfies your requirements, but this is funnier. It would be even better if I calculated the position of the indicator and the "entry point" and just kept the mouse from entering, but I have a project to finish...
Message Edited by jcarmody on 03-27-2009 11:58 AM
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
move.png ‏4 KB
test.vi ‏9 KB

Installing 64 bit version of toolkit and modules for Labview 2009 64 bit?

Hello I recently contacted NIabout installing Mathscript and Signal processing toolkits for my Labview 200964 bit that I am running on Windows 7. I was sent the following link as aresponse: http://zone.ni.com/devzone/cda/tut/p/id/10383. From this link it is my understanding that I cannot run any programs thatcontain an astrestik, since they only work for 32 bit version of Labview? In particular I really need to use Mathscript. Is there any workarounds? Do I have to also install the Labview 2009 32 bit version? Doesanyone know when Labview will allow me to run everything in the 64 bit versionof Labview? Thanks.
Kevin

Hello Kevin,
There is no workaround available, and there are no released dates as to if/when Windows 7 x64 support for the toolkits in question will be introduced.
The LabVIEW Mathscript RT Module is not supported in LabVIEW 64-bit as mentioned at the bottom of the following page: http://zone.ni.com/reference/en-XX/help/371361F-01/lvhowto/labview_mathscript/ .
Vivek Nath
National Instruments
Applications Engineer
Machine Vision

Getting Error 08 when attempting to build exe using LabVIEW 2009 (32 bit) and Windows 7

Testing development platform on Window 7 vs XP. I received following message while building an executable using 2009 32 bit on Windows 7 machine. Same build will work on an XP machine.
Error 8 occurred at Copy in AB_Engine_Copy_Error_Files.vi->AB_Application.lvclass:Copy_Error_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2009\errors\Internet Toolkit-errors.txt
Any suggestions?
Thanks

For any who may be having this problem here is a little more information and what I did to get around the issue. (so far)
First I tried a simple vi with a while loop in a project and made an executable build. This worked. I double checked on an XP machine the project that I was having problems with. The executable was built successfully. I changed back to the Windows 7 machine. On the program compatibility trouble shooter I started the LabVIEW 2009 (32 bit) in the XP service pack 2 mode and selected run as administrator. The build was successful.
Note: was logged in as administrator and program would build a simple executable in Windows 7. The executable that would not build had more complex code that included serial communication and calls to lvanlys.dll and nilvaiu.dll.
This may not be a complete fix to the problem but at least in this one case it worked.

Why does LabVIEW allow me to have 2 controls with same name

Here's a general LabVIEW question:
Why does LabVIEW allow me to have 2 controls with the same name in the same VI? It seems like this only increases the chances of confusion. Especially when someone is just looking at a block diagram (or documentation of a block diagram).
No other programming language that I know of allows this. I realize that uniqueness of name is not as critical in LabVIEW as it is in any text based language. For example, in a text based language, if I had 2 variables called abc and I wrote a statement
abc = 12;
the compiler would not know which abc was being referred to. In LabVIEW, if we had 2 controls called abc, the equivalent of doing an abc=12 is writing to a local variable (which is always linked to one of the controls) and there is no ambiguity. Still, someone looking at the code cannot figure out which abc is linked to unless he does a right click>>Find>>terminal (or a double click).
Even though I have never and never will name 2 controls the same, I think it would be a nice constraint to see enforced by LabVIEW.
Any input from NI engineers on this?
Message Edited by S G on 12-18-2007 03:38 PM
S G
Certified LabVIEW Architect, Certified TestStand Developer, Certified Professional Instructor
Attachments:
Trial1.JPG ‏21 KB

I know when you copy and paste a control or indicator, LabVIEW automatically increments the label. But since you can hide the label, and show or hide the caption, there must be another mechanism that LabVIEW uses to keep track of all the controls. I thought I remember back in the "old days" (ver 6 or 6i) LabVIEW would give you an error if you tried to make two controls with the same name. Perhaps that was LabWindows/CVI.
I don't know where the index is actually stored, but if you look at a property node linked to the Pane, you will see an array of references to the controls and indicators. Since the references are stored in an array, I assume that any local variables are tied to the index of that array. Since the labels themselves are properties of the control, I guess there's no reason to limit what that label is. They all have a unique index number.
Interestingly, this array of references grows from the beginning. That is, any new control or indicator is put at index 0, not the end of the array.
B-)
Message Edited by LabViewGuruWannabe on 12-18-2007 08:45 PM
Attachments:
Labels.png ‏12 KB

Why does my 2009 27" imac keep shutting down?

why does my 2009 27" imac keep shutting down?

Could, also, be failing hard drive , power supply or logic board.
You may have to make an appointment and take your iMac in to Apple or Apple authorized repair center for diagnostics and a repair estimate.
If your iMac has a 1 TB internal hard drive, it maybe a Seagate drive and maybe eligible for free replacement under the Apple Seagate 1 TB internal hard drive replacement program.
If you can get your iMac running, you need to backup all of your data ASAP!. Either backup to optical disc, flash drive/s or purchase an external hard drive for backup. You can use a data cloning program such as CarbonCopyCloner or SuperDuper to make an exact copy of your iMac's internal hard drive.
You can check for eligibility for free hard drive replacement by inputting your iMac's serial number here.
http://www.apple.com/support/imac-harddrive/

Does LabVIEW 2009 support multiple monitors?

Does LabVIEW 2009 support the use of multiple monitors for development? Screen real estate use in LabVIEW is difficult. It would help if the developer could use more than one monitor.
In LabVIEW 2009 can you pin certain items to appear or pop up only on a specific monitor?
Can you have Front panels only show up on one monitor and Block Diagrams on another monitor?
How is this done?

dbaechtel wrote:
Does LabVIEW 2009 support the use of multiple monitors for development? Screen real estate use in LabVIEW is difficult. It would help if the developer could use more than one monitor.
In LabVIEW 2009 can you pin certain items to appear or pop up only on a specific monitor?
Can you have Front panels only show up on one monitor and Block Diagrams on another monitor?
How is this done?
Not exactly like this, but LabVIEW VIs remember thier last location when saved and will come up at that positiont, unless that is entirely out of the current desktop in which case they will default back to the primary monitor.
Also VI server supports multiple monitors too by giving you back a list of monitor rectangles so you could do a little utility that runs in the background to do what you want. Most likely you will not like such a deamon that pulls your diagrams and panels around as you move them on your screen, but you can try it out.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Why does illustartor CC open then crashes and i get a message saying windows don't know the prob?

why does illustartor CC open then crashes and i get a message saying windows does not know what the problem is. everytime i open it, Now i know it works on my computer becuase i've used illustartor plenty of times on my current desktop but ever since today its been acting wierd and work so i've unistalling and reinstalling but still nothing works then i tried installing on another hardrive still did not work and i cleaned out my registryies, optimized my disk, and cleaned temp files tooo so i just do not know what went wrong and i really need help i have class assignments that i have to get done in illustartor so if anyone can help me and let me know what the problem is and what i have to do i would really apreciate it.

Hi J,
- Do you see an AICC splash screen? If yes then could you please let us know where exactly it crashes i.e. while loading which plugin or font?
- Do you have any 3rd party plugins installed? Can you please remove those (do take a backup of them) and see if AI launches fine? This way you would be able to find the plugin creating the problem.
- Did you install any OS or Ai update after which it started showing the problem?
- Please check if you have all the Verdana family fonts installed.
Let me know if any of these work.
Thanks,
Dhirendra

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why does my application icons have a cirle with a slash on them?

why does my application icons have a cirle with a slash on them?

That means those applications cannot be run on your computer.
There are many different reasons why that situation could arise, but without more information all we can do is speculate / guess. For example, you upgraded the OS and the apps will not run in the new OS.
If you need more specific answers.ost back with more information, e.g. what version of Mac OS X? when did this first occur?

Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

CT, I suspect that I either mistated the question or don't understand how to set the default back ground. In any case, with the background that I have set in system settings, and this is the background to which my sessions consistantly boot, new desktops come up for the second or up to the third background with this initially set background. Then in the third or fourth desktop creation (I seldom go beyond four), the background for the new desktop, is one that I was using one or two months ago...

Why does my iphone4 sometimes say it can't move certain messages to Trash?ages in

Why does my iphone4 sometimes say it can't move certain messages from my inbox to Trash?

That would depend on how your wifi or cellular data signal is, if its weak you'll get that message.

Why does labview 2009 32-bit closes up with no error message?

Similar Messages

Maybe you are looking for