Why does LabView 7.1 crash when using "Get Channel Info" vi ?

Hello,
I have written a program to get channel information for all my virtual channels. It worked fine in Labview 6i but when we upgraded to 7.1, it crashes with "Labview has generated errors and will be closed by WIndows". We have a SCXI-1001 with 6 SCXI 1102 modules, 2 SCXI 1102B modules, 1 SCXI-1102C module, and one SCXI-1140 module. Debugging reveals that the program crashes when the 1102C module channels are reached. I have attached the code I am currently using. Any help is appreciated. Thanks, Neil
Attachments:
maxinfo.zip ‏133 KB

Hello,
I have two questions for you please:
1. You mentioned early that debugging revealed that the problem was being originated on the SCXI-1102C module. Can you please try taking this module out and test your program again? Also try testing only one module and see if it works, then keep on adding more and see what happens.
2. I run your program on LabVIEW 7.1 and it didn't give me any problems. In general, anything on LabVIEW 6.1 cab be recognized by LabVIEW 7.1, so maybe the order of installation you did is not correct. Did you first take the board out, uninstall the previous version of NI-DAQ you had, install LabVIEW 7.1, then NI-DAQ 7.3 and then plugged the board in?
Please let me know about this.
Thanks,
LA

Similar Messages

Why does Adobe 9 standard crash when using the digital signature

When using the digital signature in Adobe 9 standard it crashes, it has been repaired, uninstalled and reinstalled and still crashes when putting in the digital signature and not understanding why. Also the digital signature was redone. Your thoughts on this would be most helpful.

I had the same problems and was VERY frustrated.
I finally solved my problem by uninstalling reader 9.1, air, acrobat.com and THEN after a restart, installing a lite version of reader 9.1 from this site:
Good Luck!
rufus78

Why does LR5 Beta Keeps crashing when using the brush?

When i use the brush LR5 beta keeps crashing. I have Windows 7 OS. LR5 beta crashes when I am working with the brush on an image. I have to close and re open, but with brush it just crashes again either on the same image or working on another image. Any ideas please?

LR 5 has been released. Please update to the release version and try again.
Download here.

Why does Illustrator CS5.5 crash when opening 1.5GB sized vector layered files on my iMac OS X?

Why does Illustrator CS5.5 crash when opening 1.5GB sized vector layered files on my iMac OS X?

1.5GB for a vector file is very large. If you can ever open this file would recomend file >> save as >> turn off PDF compatibility.
Can you please tell us why your file is so large, you may have a problem such as deleted global swatches, or an exceptionally large number of items in your symbols, styles, brushes palette. For even the most complex illustration filling the entire 227.54" artboard, you should be under 20mb if you have no embedded or linked images.

Why does my pages app crash when I try to email a document?

Why does my pages app crash when I try to email a document?

Check for an update. Also if you're on 3G, try to doing it over WiFi to see if it works better because sometimes the network just can't handle it so the app crashes to protect itself.

Why does App Store always crash when I try to open the appliction?

Why does App Store always crash when I try to open the appliction?

You don't have the typical symptoms that I associate the following issue with (normally the error kicks in just when folks visit the Store), but just in case try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

Why does my Iphone 5 ring when I get a call, but can not figure out why there is NO sound when I get a text?

Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???

Deborah,
The solutions on here did not work for me.   I tried.....
I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
(1) I have "do not disturb" scheduled correctly.   No partial moon on the main screen near the time and battery indicator.
(2) I have the ringer icon correct with no slash.    Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side.   I tried messaging with the bell as shown and bell with a slash and neither work.   The mute switch is not red (switch above the + volume hardware switch)     I enabled some assistant using the Settings menu.    And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
(3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds.   But they do not link with the actual hardware.
(4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
(5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes.   And the upgrade was successful but did not fix the text issue.
(6) I do not have it in airplane mode or silent mode.
(7) I reset all settings using Setttings > General > reset > reset all settings . this wipes settings but not data and media.
This is really frustrating.

Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

Why does Photoshop CC running slow when using Mixer brush tool

Why does Photoshop CC and Photoshop C6 running SOOO slowly when using Mixer brush tool??
Only to create one stroke it takes several seconds.
I have to wait a long time to do next stroke. I can't work with this. How do I fix this??
I have a new computer, a Mac Book Pro with 16 GB ram, so I have plenty of ram.

You really have to keep your brush size small with the Mixer Brush tool. And that necessitates keeping your canvas failry small as well.
Back a few years ago I did a whole painting with the Mixer Brush once and some of the bristle brushes - just to see if I could - and I found I had to really limit the brush size (e.g., to 50 to 75) in order to get enough responsiveness to keep painting. In that case my canvas was 4096 x 5120. It's not impossible to get a good, professional result, but you have to be careful about sizing things right.
-Noel

Why does pre pro cc crash when rendering?

Why does my pre pro cc crash when rendering? It has done this repeatedly

There can be a LOT of reasons. You'll need to start investigating and eliminating variables.
Start by turning GPU acceleration off if it's turned on, and go from there.

Why does Premiere 7.0 crash when capturing LIVE video and audio?

Why does Premiere 7.x Creative Cloud Crash when capturing live Video in about 10 minutes.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Why does my Mac keep crashing when playing Batman: Arkham City?

This is the second time I've played through this game. The first time I played the entirety of it without any crashes, but since then there was an Apple/OSX software/hardware update and now it crashes every 5 minutes or so. The update I'm talking about supposedly fixed graphics/GPU performance issues, so I'm wondering if that update is the problem now. Here's what I think is going on:
In order for the system to allow decent performance on the Retina model MacBook Pros, more GPU power had to be unleashed (either through some overclocking or just letting it run longer before slowing the processes down and kicking the fans up??) so they had to allow the GPU to get hotter, but now it gets too hot and so OS X is terminating the causal application, Arkham City, before any damage is done.
Also, no matter what graphics settings I use in the game the FPS rate average only changes from a low of 47 fps to high of 52fps. I'm not that into gaming, so I don't really know much about it, but that doesn't seem to make sense to me.
Here is a list of all the settings that I have ON when I get an average 45fps: Full Screen Anti-Aliasing: 8x; Detail Level: High, Dynamic Shadows: Yes, Motion Blur: Yes, Lens Flares: Yes, FXAA: Yes, Light Shafts: Yes, Reflections: Yes, Ambient Occlusion: Yes, V-Sync: Yes, and Particles: High
When I switch everything to either off or its lowest setting, it only gives me an additional 5-7fps, AND it still crashes, if anything, more often than when the higher settings are used. How can I get my Mac to let me play through this game like I used to?
The computer running Arkham City is a 2012 Macbook Pro with Retina Display, 15", Quad 2.7Ghz i7 w/8MB L3 Cache, 16GB RAM, and 768GB SSD, Nvidia GeForce GT 650M 1024MB + Intel HD4000.
Thanks for any help you can give!
P.S. If you haven't played the Batman Arkham series, I highly recommend them both (this current issue notwithstanding).

You can make an appointment with a Mac Genius at an Apple Store for a consultation. They will examine your Mac and try to figure out what might be wrong with it. The consultation is Free, whether you have AppleCare coverage or not.

Why does my Mac shut down when using Safari?

Every once in a while (randomly) my mac will reboot due to an error even when I only have the Safari Application open. How can I stop my mac from doing this. I have the 2011 macbook pro 13 inch with the latest OS (Mountain Lion). Everything is up to date but why does it keep shutting down?

Hi Sebaz, first try repairing permissions. Go to Applications-->Utilities-->select Disk Utility. Select your drive then select the First Aid button then at the bottom right click Verify Disk and after it verifies your drive click on Verify Disk Permissions on the left. If there any errors click on Repair Disk Permission. Reboot your machine and test your Safari to see if the issue comes back.

Why is my 15" rMPB crashing when using 2 Thunderbolt Displays?

Over the last few days my 2012 15" rMBP has been crashing periodically.
Today it continued to crash every few minutes, I tried resetting PRAM and SMC - didn't seem to help. After reading somewhere (not here) people having issues with Multiple external Displays, I onlly plugged in one of my 2 Thunderbolt Displays and it seems to be stable.
In my normal set up I use 2 - 27" TBD's and a 55" Sanyo TV via HDMI - it has worked great for over a year but now I am experiencing continued crashing when I have everything plugged in.
Is this a known issue?
I think this may be an issue with the last update - which was installed on my rMBP on the 9th or Jan (only 9 days ago)... that is about when I first started noticing an issue.
Is there anything I can do?

Welcome to Apple Support Communities
Note that your MacBook Pro is using the dedicated GPU and you have got two GPUs. The dedicated GPU generates more heat, and even more if you are using the GPU to display image in three displays (including your built-in display). I would not be worried if fans are working correctly

Why does my .vi not work when used as a sub vi

I have a vi that produces a picture on the front panel. Displayed in the picture are solid grey levels for testing. Two grey levels are chosen inside the vi and then the picture flickers betwen the two. When I run the vi by itself it runs wonderfully, but when I run it as a sub vi it does not work. Even when I just place the sub vi in the block diagram and connect all of the controls and indicators up it doesn't work.When I use the highlighter it shows that the control values go into the sub vi and the sub vi lights up, but there is nothing output from the sub vi to the wired indicators. When I open up the Block diagram of the original vi from which the sub vi came, and highlight it while running the subvi, it
shows that it is working with information running to all of the indicators. If I start a new program with only the sub vi in the block diagram and all of the controls and indicators connected, should it not behave as the sub vi? I will attach the vi that I am using as a sub vi, and I welcome anyone to place it in the block diagram of a new vi, connect all of the controls and indicators up and see if it works. I know that there is something completely obviopus that I am missing, but I can't see it. Any help would be greatly appreciated.
Attachments:
GL_Flicker.vi ‏74 KB

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Why does LabView 7.1 crash when using "Get Channel Info" vi ?

Similar Messages

Maybe you are looking for