Why does low resolution warning show when I used a high resolution camera

Hi,
I am just learning about iphoto, and have been uploading photos I took with a 4 mega-pixel camera. I have printed out photos at Kodak printers directly from the camera, and they came out great. However, when I upload the photos to the Mac, then burn them to a CD, and try to print them they come out blurry and have the low resolution warning. Does anyone know why that is happening? Is there a setting that decides the photo quality when pictures are uploaded?
Are the photos I have now "doomed" to be at low resolution?
Thanks

The "share" function actually places a mini-library on the CD so that it can be loaded into another Mac that has iPhoto. Just like in your library, the CD will contain, for each photo, the original "out of the camera" version AND the most recently modified version AND a thumbnail for viewing within iPhoto. Apparently the thumbnail was the one that was inadvertently selected for printing and, of course, the resolution is minimal.
If you want to burn a CD for use on a PC or to give to your favorite photo-finisher, create a folder on the desktop and "File/Export" the contents of the album to that folder. Then, EXIT iPhoto and burn the CD with the contents of the desktop folder. After checking the CD and confirming that all is OK, you can trash that folder.

Similar Messages

  • Why does "low battery" warning always come up when I start the iMac?

    I've been getting a "low battery" warning lately when I turn on my computer. I've tried 3 sets of new AA batteries (bought from 3 different stores), but that doesn't seem to help. Of course it could be caused by the unlikely event that all three "new" battery packs were not fresh, but that's unlikely.

    and you're talking about the mouse ... the keyboard ... ?
    also, does the message vanish after a while? what does the battery indicator say?

  • Why the subvi can not show,when i use call by reference node.

    I used a call by reference node in function pallete,i follow the labview manuals and examples(dynamic load example), but i can not see the subvi show when the program running.
    Attachments:
    comshow.vi ‏75 KB
    交流稳态频谱.vi ‏19 KB

    Hi Sunny,
    Open your subVI,
    1. go to File->Vi Properties (or Ctrl+I)
    2. choose Window Appearance category
    3. choose Customize
    4. check "Show Front Panel When Called" (and "Close Afterwards ..")
    5. save the VI, close it and try again.
    Let us know if it's OK ...

  • Video play drags - Why does H.264 video drag when played using iPhoto?

    I recorded video using a Canon HD camera (VIXIA HFM301). I downloaded the video to my MacBook Pro. When selecting the video from my photo library to watch, the replay drags; almost looks like the video is blurry. When i download to my old PC, it does not drag.

    Material from a Camcorder goes into iMovie for processing, not iPhoto. Then you export the finished work and import it to iPhoto or wherever you choose. iPhoto is designed to get lightweight video from point and shoot cameras, not material from camcorders.

  • Why does my browser go "back" when i use my mousepad

    my browser randomly goes back to the last browser when i use my mousepad.
    == This happened ==
    A few times a week

    thanks Pat. its fully updated.
    Did you go to the mfgr's. Web site, and look at the driver downloads, and then verifying that you have the latest one installed? The reason that I ask is that the OS, and most driver update utilities, will be about 6 mos. out of date, if not more.
    Also, new computers are loaded with a "master" disc, that was probably created at least 6 mos. before it was used to setup your computer, if not a year. The drivers are very old. With a new computer, the first two things that I do are: clean off any "bloatware," that the mfgr. installed, and then update the OS, and ALL drivers. I have seen drivers that are 3 - 4 years old on a new factory build. All good custom builders, will not install bloatware, and will update the OS and all drivers, before delivery. On an assembly line, that will never happen.
    Good luck,
    Hunt

  • Why does my apple id show when i send text messages?

    Since I updated my iphone to ios 5.0.1, the person I'm texting sees that they've received a message from my apple id instead of my phone number. How do I change this so I show as the contact they have saved in their phone?

    This must be a new glitsch. Mine is doing this too and sending all messages to all of the devices on my icloud account. Very irritating. Is this recent? Mine just started two days ago.

  • Why does my adobe pp crashes when i use adobe media encoder

    I have app v7.0, mybe this is CS1 or not, but still, how can i fix this problem?

    Welcome to the forum.
    While gathering the necessary info, this ARTICLE might help you find out what is happening just before and during the crash.
    This ARTICLE will give you tips on setting up your computer for an editing session.
    This ARTICLE will tell you the types of info that can be so very useful, and necessary for us to help diagnose from our computers.
    Good luck,
    Hunt
    PS - just click on the words "ARTICLE," and you will be linked to those.

  • Macbook does not recognize iphone 5s when connected using usb cable that came with charger

    I have a mac book pro Retina, 15-inch, Late 2013 and iPhone 5s. When I connect iphone to the macbook using the usb cable that came with iphone charger, macbook pro is not recognizing the iphone 5s.
    Does any one have any solution for the problem

    iOS: Device not recognized in iTunes for Mac OS X
    BTW, this is the Mac Pro desktop forum

  • Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

    Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
    When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
    I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • WHy does my iPhone not show up in my iTunes when I plug it in?

    WHy does my iPhone not show up in my iTunes when I plug it in?

    It could be for any number of reasons. Since you do not identify the computer OS you use, here is information for both.
    Windows:     http://support.apple.com/kb/TS1538
    OSX:     http://support.apple.com/kb/TS1591

  • Using Windows 7 and LR 5  when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword.  Why does the Library Filter showi

    Using Windows 7 and LR 5,  when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword.  Why does the Library Filter showing pictures that do not match the query

    Dan,
    Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding".  There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics.  There is no overlap between the two sets of pics. 
    I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn".  I found two occurrences of "gwenn":
    gwenn
    schwartz
        {gwenn}
    From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
    The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
    This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
    So LR is operating correctly here, if not in a way that's easy to understand. 
    It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family.  A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc.  Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe".  Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

  • HT2242 Why does my Itunes store show up in Japanese/kanji when I've got my language specified as English?

    Why does my itunes store show up in Kanji/Japanese when my language and country selections are in English?

    I'd like to add one more thing.  I need to update my iPod as I'm using version 1.0.2 PC -- Before I do this, I'd like to back up my iPod.  As I noted above, I am afraid of doing something and accidentally wiping out my iPod (since that's where everything seems to be).

  • Why does my internet password show up when I reply to an email from my cell?

    Why does my internet password show up when I reply to an email from my cell?

    this question is extremely broad. can you describe what you mean? where does the password show up? in the signature line? as the subject? in the body? and what internet password? your home provider? your cell provider? what's the password for? your email account? or is your phone password protected? details.

  • Why does my exported swf show more content than actually on frame?

    Why does my exported .swf show more content than actually on frame?
    My problem is relatively simple, though, I had some trouble finding a solution to it:
    When I play my exported animation using flash player in Google Chrome, if the window is bigger than the resolution flash document/frame, it shows content not meant to show up on the frame -- like parts of a huge background that aren't supposed to show up yet.
    In other words, how do I constraint the .swf to the white background/document resolution?

    Anyone? I'd appreciate it if someone replied soon -- I am done with my project once this issue is resolved, and I am excited to publish it.
    Please respond if you have any useful knowledge on the matter!
    Thanks!

  • Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

    Why does images in preview are in a different position and resolution than in design view? In design view I have to place the images of screen to fit in preview.

    Already changed in different settings. Here is a screenshot when set to "Original Size".

Maybe you are looking for