Why does LR 4 not recognize Sigma lenses (NEX 7) automatically in Develo module for lens corrections

In Lightroom 4.6, "enabling lens profile" in the Develop module works perfectly for Sony lenses with NEX ARW files (NEX 7).
When i use Sigma lenses instead, nothing happens although "enable profile corrections " is ticked, no matter what is set next: auto, custom, or default....
I am getting tired to always have to fill in the 3 Lens Profile questions (but only for Sigma lenses) with 1: Sigma, then 2: search the lens in Lightroom's long Sigma list and click, and finally 3: hope it takes.
I am assuming that Lightroom reads the Metadata (where the Sigma and Sony lenses are fully described, I have checked!), but does not cooperate with Sigma, while Sony lenses work so well.
Why is that so and how can I get the proper lens profile automatically if the lens does have its own Adobe profile loaded?
Frustrated ...

Why is that so and how can I get the proper lens profile automatically if the lens does have its own Adobe profile loaded?
Frustrated ...
Pick the correct lens manually then choose 'Save New Lens Profile Defaults' from Setup drop down menu. Lr should remember the lens and use it as the default in future. See screenshot below

Similar Messages

Why does elements 11 not recognize nikon nef files

I have been using Elements 11 for quite a while for Canon Raw files with great success. It really works fine for me.
I recently bought a Nikon D300. For some reason Elements 11 will not recognize the Nikon NEF raw files.
W H Y ? ? ?

Thank you for your reply.
Answers to your questions:
I am using Win7 64 bit. Elements 11 has worked just fine until I attempted to process NEF files.
I always copy files to my HD before trying to process any.
How do I check to see if my Camera Raw module is current? EVERY time, regardless of day of the week or time of day, when do the Help/Update thing I ALWAYS get that message block about website is busy, try again. I'll bet I've tried it over a hundred times over the past two weeks or so. I have a feeling that it can't be that busy for that long. Or, maybe I'm just unlucky, or maybe your server is too small to handle the load.
Needless to say, I am really frustrated with Adobe.
Again, thank you for your reply, and hopefully my answers will provide a solution.
Regards,
ChuckWagner
R_Kelly <[email protected]> wrote:
R_Kelly created the discussion
"Why does elements 11 not recognize nikon nef files"
To view the discussion, visit: https://forums.adobe.com/message/6643873#6643873
>

Why does PS 7 not recognize Adobe RGB files?

I have an Olympus E-620 DSLR. When I set the color space in the camera to sRGB, after downloading the images, when I click to open them in Photoshop 7, the images are properly identified as sRGB files. When I set the color space in the camera to Adobe RGB, Photoshop does not recognize the format. Please see the picture below.
Question 1: Why does Photoshop not recognize the Adobe RGB files?
Question 2: What can I do to make Photoshop recognize Adobe RGB files?
Question 3: If I assign in Photoshop the Adobe RGB profile to an unrecognized Adobe RGB file, does that even make any sense? Is the "extra data" that Adobe RGB offers compared to sRB even there even if the profile is not recognized in the first place?
I am very grateful for any comments and advice!

Buko. wrote:
Are you saying that the file is really AdobeRGB and because PS7 is so old its defaulting to sRGB? which is why you are assigning?
Yes...if the file name starts with an underscore _IMG12345 then the image is indeed in Adobe RGB. It's a failure and limitation of the EXIF spec that only allows for two different EXIF tags relating to color space...either sRGB or "unspecified".
Since the camera makers wanted to offer Adobe RGB as a color space choice in camera JPEGs, the underscore was the ONLY way to say whether a file was in sRGB or Adobe RGB. Note that camera JPEGs do NOT have an embedded profiles, just the EXIF tag. And yes, Photoshop 7 is/was too old to understand the Adobe RGB underscore color space.
A lot of stuff has changed (sometimes radically) since that piece of software was released...heck, there wasn't even a Camera Raw until about 9 months AFTER Photoshop 7 was released. Camera Raw 1.0 was released Feb. 19th, 2003, Photoshop 7 was released about April 2002.

After update 7.0.2 why does my car not recognize my phone book ?

After IPHONE5 update my Nissan Maxima does not recognize the phone book anymore

Fixed it. Just needed some duster!.. Ha!..

Why does my iMac not recognize my iPod nano?

I recently purchased an iPod nano, with the touch screen, for my wife. Obviously she wanted to immediately connect it to our iMac 27" and transfer her music files. But the iMac does not recognize the iPod, whatever we try. It does not turn up in iTunes, the Finder or System report, and it does not charge. The really strange thing is that the computer has no problems with my HTC Wildfire, running Android. It also has no problems with flashdrives, our portable hard drive or printer. Only the iPod. So much for the "Im a mac and I always work.. diddely."
I have tried the following:
Reset the iPod nano by holding the power button until the grey apple appeares
Restore the iPod nano from a PC running Windows XP (Which had no problems recognizing the device by the way)
Tried to connect with two different cables (Wich again both worked well with on the PC)
Updated iTunes to the newest version
Ugraded from Snow to Lion
Reset PRAM, NVRAM and SMC
Shouting
None of those has made any difference. What should I do next?
My Mac is a iMac 27", produced in 2009, 3,06 GHz Intel core 2 Duo, 4 GB 1067 MHz DDR3 Ram S/N: W80031TH5PE. Running MacOS X 10.7.2
The iPod is a nano, latest generation with the touch screen, Model no: A1366 EMC No: 2385. S/N: DCYFX08WDDW2

Reformatting will wipe out everything you synced to it. Check out the iPod nano (6th generation) - User Guide for reformatting instructions and other troubleshooting suggestions if you have not already done so.
Suggest that you do a search through Knowledge Base
Read the postings listed in the "More Like This" column over here: ---------------->
If you are still having problems after doing the above and in view of Apple Stores not replacing and/or charging you for repairs, strongly suggest that you call Apple Customer Relations @ 1-800-767-2775. Explain to them exactly what you stated in your postings.
Good luck!

Why does my bank not recognize my computer every time I log on, and this only occurs when I log on with Firefox not other browsers

I log on to by bank and firefox remembers my account #, but when the next screen pops up the bank does not recognize my computer. Each time after answering the correct security question ,I check the box to remember this as a personal computer but it never does. This only happens when I use Firefox, not other browsers. The other browsers remember the acct and that it is a personal computer.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
We hope to hear from you soon.
I would not recommend storing any bank information on your computer, for various security issues.

Why does my computer not recognize my iphone?

My MacBook Pro is not recognizing my iPhone 4. The iPhone is making the beeping sound as it is plugged in, but iTunes does not show it on the left side panel and it is not showing up on the desktop. I have tried using a different cord (the one to another ipod), but it did not solve the problem. The cord I'm using has worked fine to charge it to the wall. Is there a setting in iTunes that I need to adjust in order for it to recognize or do I need to make an appointment at the Apple store to have them look at the iPhone? I bought the iPhone new just two days ago, so it shouldn't have any problems (ha), and otherwise it has been working just great.
Any tips or suggestions? I would appreciate any help I can get!

http://support.apple.com/kb/TS1591?viewlocale=en_US

Why does Boot Camp not recognize Windows ISO image(s) ?

Dear friends,
My intention is to install Windows 7 on my Mac
(I've several Windows OS .iso images)
in the "BOOTCAMP" called partition, created by Boot Camp 3.0 application, on my internal drive.
This is a 32 GB partition, being FAT32 formatted,
but any version of Windows 7 (when installing)
will surely want to be on an NTFS volume and reformat it.
I've already burned 3 ISOs, with Toast Titanium 10.0.7 (speed : 2x, less not possible), on 3 DVDs :
— 1 DVD -RW with W7 Enterprise x64 (with folders and strict ISO 9660 names) ;
— 1 DVD -RW with W7 Enterprise x86 (32-bit) with one unique ISO, alone ;
— 1 DVD -R with W7 Ultimate x86 (32-bit) with one unique ISO, alone.
*Boot Camp doesn't recognize these discs as Windows installation DVDs*,
and so does nothing but wait.
I'm sure that something is missing on the disks to be recognized
as bootable Windows installation discs,
but I absolutely don't know what (setup.exe, for example, or another .exe file ?).
Do I have to do something with the burning options
(strict ISO 9660 naming, Mac names authorized, Hybrid Mac and PC,
Joliet names or not, folders or not, etc.)
Do I have to do something with the ISO image (any ISO I have), and how, and what ?
I've also activators and many other things (.exe files),
but I think they have to be used AFTER installation.
Thank you very much in advance for your help !
With my kind regards,
Olivier Herrbach
Message was edited by: Olivier Herrbach

Dear baltwo,
Thank you very much for your feedback.
I'll go there immediately. It's obvious for me that only one .iso file, alone on a DVD, can't be sufficient, comparing with +(but I don't know what)+ is on a Microsoft Windows Install DVD.
With my kind regards
Olivier Herrbach
PS : I didn't have any time to reply to anyone, when I asked "How can I move something (copying it) without leaving original in it's place ?". Someone had the answer : "Drag and hold down cmd while releasing mouse". OK, it works, but you have to have good nerves, because folders open when doing that (I changed delay in Finder Preferences to the slowest), and there's also another inconvenient : I don't trust in copy (I want a one by one byte result), so I have to write what Get Info says BEFORE, and compare it after that with what Get Info says. In this case, I prefer to return to my old habits.
PPS : I observed, and I will tell it somewhere when possible, that *Get Info gives false informations*.
For example, I copied a folder with 58 items inside. Get Info didn't give me the same number of bytes for the copy as for the original. So, I did Get Info for *EACH of the 58 items*, wrote the results (in bytes) on a paper, and after adding *all the bytes of the copy*, found THE SAME NUMBER *as the total size of the original.* That's how I waste my time !
Good evening, hoping to read you somewhere soon.

Why does MacBook suddenly not recognize printer?

My HP Photosmart D5069 printer was working fine but suddenly the print jobs would not start. Things originally got a little quirky when I tried to connect to an USB hub but then I disconnected everything and reconnected and then it worked okay until this latest problem. There was a perpetual exclamation point next to the printer name in the print dialogue box. I tried to reset the printers but now the Print Browser won't recognize the HP printer at all. This happened with my last printer (Lexmark) and I finally just tossed it but this HP is new and I know it's not a printer problem as I downloaded the latest drives and the HP updater confirms I have the latest software on my MacBook.
Any ideas on how I can get the MacBook to recognize the printer like it always did in the past?
Message was edited by: bdprod

I need a bigger trash can!
Printer is not listed in System Profiler. USP port indicates there's nothing there.
I did get the printer to work for half a second after leaving it unplugged overnight. I successfully added the printer in the Printer Set Up utility. Unfortunately, the paper jammed and after dealing with that, the printer went offline where it remains now. Maybe it needs another full night's rest.

Why does ACR CC not recognize QPcalibration from Nikon D810

I used to make color calibrations with a QP Card 203:
1) Take a picture of the QPcard in the actual light with f.ex. Nikon D300S,
2) use QPcalibration to create a named colorprofile,
3) wich shows in CameraRaw 8.7.1 Camera Clibration in CameraProfile dropdown list and in LR Develop Camera Calibration Profile. (If the picture is taken with Nikon D300S)
But this does not work with Nikon D810.
The computer runs Win7 x64 professional(DK).
LR 5.7, ACR 7.7, Ps CC 14.2.1 x64
It has cameraprofiles in
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera
and in
C:\users\username\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
Everthing seems to work as it did with D300s except:
I can´t persuade ACR and LR to show my new QP profiles!
What is wrong?
/Carsten

Hi,
This is a Nikon D810 picture.
https://www.dropbox.com/sh/frsdricgrpk9op2/AABWrHp-5QwX2TpJnUdQMcLDa?dl=0
It will be interesting if you can find the profile in LR or ACR.
I'll wait anxiously
/Carsten

Why does apple tv not recognize my apple id?

I'm using Apple TV and trying to share it on my network. Why doesn't it recognize my id when I put it in. It was working before but I couldn't get it to recognize my laptop so I reset my account and now it says it doesn't exsist. I'm on wireless all the way around. The account works fine for my laptop's iTunes. Any help would be welcome. Jason

Welcome to the Apple Community.
Please tell us what you are trying to do.

HT201320 Why does auto fill not recognize my email address

I have set up auto fill. It use to work fine till I cloud was installed. Now when I use auto fill all the information is filled out. But when the page refreshes, it comes back as a invalid email address even though everything is correct. Is there a solution.

Was this group email successfully sent by your .Mac
account?
No; that was the first time I received the error message.
How many recipients were included with this group
mailing?
30+
Do you send a number of messages to a large number of
recipients on a daily basis with your .Mac account?
No; I do periodically, maybe 3-4 times a year to announce major changes with firm. Emails have worked in the past but possible I did them from my road runner account.
As with most other email accounts, .Mac has a sending
limit on the total number of recipients per message
and the total number of recipients for all messages
sent in a 24 hour period.
You ISP at home is RoadRunner but you use a different
ISP at the shared office?
Yes; trying to find out who it is.
If you are also accessing your RR email account with
the Mail.app and RR is not your ISP at the shared
office, are you able to send messages with your RR
email account and SMTP server when connected to the
internet at the shared office?
I access the RR email via the RR website, not via the Mail App.
Just hitting all angles in an attempt to eliminate
possible causes of this problem.

Why does my iPad not give me the option to enter a phone number for iMessage or FaceTime?

I don't have the option to enter a phone number in iMessage or FaceTime on my iPad. I used to have that option, but it has disappeared.

Use an email address. You can get a gmail.com address just to use for FaceTime & Messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

TS1398 Why does my iPad2 not display the WiFi icon?

Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

Try the following:
1. Reset the AirPlay devices
2. Reboot the router
3. Reboot the iPad
Note: The AirPlay icon is now in the Control Center

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

Why does LR 4 not recognize Sigma lenses (NEX 7) automatically in Develo module for lens corrections

Similar Messages

Maybe you are looking for