Why does mac mail take so long to load with icloud

whenever I reopen mail it takes an extremely long time to load, since I switched ovet to icloud. I have tried to delete some extra mailboxes, didn't seem to help at all. any suggestions?

Try setting:
Mail > Preferences > General > Check for New Mail > [enter a good frequency]

Similar Messages

Why does migration assistant take so long to load?

I'm trying to set up a new Mac mini with info from old Mac mini. How long am I supposed to wait for this to work? I've tried 5 times via wireless and Ethernet. It spends 30 plus minutes gathering info. How long should it take? What is the best way to do this? (I'm not buying a FireWire cable that connects old style and new)

Your best bet is to use +Setup Assistant+ when your new Mac first starts up. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum). If you've already set up a user account on the new Mac, see the "Second Chance" instructions in the green box.
It will be much faster and more reliable via FireWire.
Ethernet will take longer, but don't try wireless; it's notoriously slow and unreliable.

Why does iPhone videos take so long to come up on the Apple TV?

Why does iphone videos take so long to come up on the apple tv?
1080P has a large file size but are there ways to get it to start to play faster?
Hard wiring it into the LAN helped a bit but what is really slowing it down? WPA2?
Thanks,

could be the wifi speed as in 56Mbit vs. newer 300Mbit version
or interfearing from other wifi networks which use the same channel
or microwave or dect phones which also operate on the 2.4Ghz band

Why does my MBP take so long to boot?

My MacBook (2006, Core Duo, 2GHz, 2GB RAM, 10.6, 5400rpm drive) cold-boots to the desktop in 33 seconds.
My MacBook Pro (Mid 2007, Core 2 Duo, 2.2GHz, 4GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 17 seconds.
My work MacBook Pro (Mid 2010, Dual-core i7, 2.66GHz, 8GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 6 seconds.
All of these are timed with nothing physically connected to the computers. Why does my oldest, slowest laptop boot in half the time of my newest fastest one? How do I bring the MacBook Pro boot times down?

My MacBook (2006, Core Duo, 2GHz, 2GB RAM, 10.6, 5400rpm drive) cold-boots to the desktop in 33 seconds.
My MacBook Pro (Mid 2007, Core 2 Duo, 2.2GHz, 4GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 17 seconds.
My work MacBook Pro (Mid 2010, Dual-core i7, 2.66GHz, 8GB RAM, 10.7, 7200rpm drive) cold-boots to the login screen in 1 minute 6 seconds.
Well it's a combination of the bloated beast of 10.7, it's auto-restore of programs and having more RAM for the Power On Test System to check on the second two machines that differs from the first.
You would think the faster hard drive would help on the second two machines in boot times, but that's not the case as it takes longer for 10.7 to get setup.
Plus Lion was just thrown out there like Vista was, half baked and tested little, 10.8 is the one they are tweaking to be better I can only assume.
Only thing I can advise is to drop all machines to 10.6, or make due reducing the restore at boot programs in 10.7.
You could do a Disk Utility > Zero Erase and fresh install of 10.7 on the last two machines, install apps next then files, keep the boot drive below 50% filled, that's the best you can do really for 10.7, do the same for 10.6 and it will be fast.
How to revert your Mac to Snow Leopard

Why does renaming masters take so long?

I've used Aperture since version 1, and have mostly been happy. But I've always wondered why, when doing a batch rename with "Apply to master files" checked, does it take so long?
A few minutes ago, I started the process for a mere 256 photos and I'm still sitting here waiting as it renames originals. This behavior is across all libraries and it even happens on a brand new small library.
The Finder can rename files almost instantly. iView Media Pro could do it as well (in 2005). I hope somebody can come up with a logical reason why in 2013 a simple master filename rename is the slowest part of our workflow.
For anybody saying to just rename them on import, I would rather wait until all cards from all cameras from an event are imported, arrange them by date so the renamed file sequence number is in the order that they were shot. If I rename them on import, the sequence numbers won't be chronological and that is why I don't rename on import (unless I've only shot on one camera, which is rare).
Does anybody see this changing in the future? (I've been sending regular feedback suggesting more robust renaming tools since 2007. Can I do anything else to speed this up?).
The rename process is done. Took > 5 minutes to rename 256 files. Seems like an eternity. It's been slow on every computer I've ever had, current one is Mac Pro 2 x 2.26 quad-core Xeon with 24 GB RAM, Application and startup drive is SSD, media files are on HDD.

Is there _anything_ else in your set-up that could be adding to the time it takes to write the names to disk? Disk-mirroring? Back-ups? Some kind of indexing (Launchbar, etc.)?
I rename tens of thousands of files, and while it is not instantaneous, I don't have to wait five minutes for a thousand files or more.
You might try something outside Aperture, such as the excellent NameMangler, just to see if batch renaming several hundred files is slow there. NameMangler was recently upgraded. It works astoundingly fast.
If you can't resolve this, you might be able to work around it by importing all files into a Finder folder, arranging by date, and then importing into Aperture and renaming on import. (I'm not positive this will work -- and I'm sorry, but I can't check it right now.)
HTH.
--Kirby.

Why Does Captivate 4 Take So Long to Close?

I’m using Captivate 4. Sometimes it takes a long time to close a project and the next time I open Captivate, it takes a long time to open, moving very slow through “loading content.” Once I remove and re-install, and then update the patch, it works. But then it does it again. Someone said that it has to do with a corrupt preference or settings file, so when I re-loaded, I didn’t make any changes like adding for example, the alignment bar (which I usually use). Is there anything else that can be done? Does Captivate 5 have a fix for this by any chance?
Phyllis K. Day

Welcome to our community
Unless something has gone catastrophically wrong, you should never have to perform the uninstall/reinstall/reapply the patch hokey pokey. So that's just wasted effort. There is a simple way to perform what I call the "Factory Reset".
I recently described how to do this in the thread linked below:
Click here to view
I might question why this is needed at all. Perhaps you are unaware of some things that help you avoid issues with Captivate.
For example:
How many slides are in your projects? We normally recommend keeping projects somewhere between 50-65 slides as a rule of thumb guideline for the upper limit.
Where exactly are your projects residing when you make edits? Frequently we see folks working with projects on a network drive. This is less than optimal and will often cause issues and slowness and project corruption. Work locally off your C drive and periodically copy the project the network server to be backed up.
Hopefully something here was helpful to you... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Why does my iphone take so long to turn back on when the battery runs out?

Ok, granted, I am guilty of not always plugging my iphone in when it gives me the low battery warning. But why does it take SOOOO long to get enough charge to turn back on? If apple is taking suggestions, then my suggestion is that you should just be able to plug it in and it should be ready to use within a minute, like other cell phones. I've had my battery die mid phone call, and then had to wait for it to get enough charge to call back. I know its maybe only about 5-7 minutes but that seems like forever to return a dropped call. Does this happen to anyone else or is something wrong with my phone? Any suggestions?

Apple set the default to 10 minutes before you can use the iPhone. After 2 minutes you'll get an image of the low battery. It's in the iPhone Users Guide, page 49.

Why does FiOS internet take so long to connect when I boot my computer?

Windows Vista Home Premium Service Pack 2. M424WR modem/router. Every time I turn on my computer or even if I reboot, internet takes up to 2 minutes to be able to use. My computer doesn't detect any internet connection until, it seems, it's good and ready. The modem is NEVER turned off and everything else in the house dependant on the internet connection doesn't have a problem. Phones, wireless lap tops, or the PS3. Why does it do this? I have put IHA messenger on manual in startup. But I still get the same problem. Is there any way to fix this? It's so annoying.
And Please, Verizon support, don't send me any private messages that say to call verizon support or asking me to send you my verizon account info. I absolutely HATE that when you guys do that. I'm not spending half my day on hold, and you don't need to know that to answer why the computer is taking so long to find the internet connection. If you don't know why it's doing it, then say you don't know why, or better yet, don't even respond at all. {Please keep your posts courteous}

I have both an XP machine and a Win7 laptop. Both take time after booting to access the network. The culprit is Norton (Symantec). In both cases it runs a security check BEFORE it allows network access.
You may not have Symantec products installed, but if you have any other antivirus software it it probably doing the same thing.

Basic Question: why does exporting Movie take so long?

I import an hour long H264 640x480 movie into imovie. It takes about eight minutes.
I then add a few chapter markers. That's all I need to do.
Then I export as a large movie, also H264. It takes four hours.
So why does it take so long, as it is the same format? Is it just because the size is a a little different? Is there any way to export the movie at the same size as it was originally? Then would it export more quickly?
Thanks.

TimK wrote:
… What is a res?
I assumed that imovie did support h264, as up to now it has been exporting all my movies as h264 by default.
ooops, sorry: res=resolution
iM is meant for Camcorder imports - those trigger the import routines: .dv gets 'cloned' into Events, HDef gets converted into the AppleIntermediateCodec ... which offers the two (three) standards 1920x1080, (1440x1080/anamorph for HDV/'HDef on tape' sources) and 1280x720 ...
The EXPORT codec h.264 isn't meant for editing, but optimized for playback and file-size.
technically, a AVCHD/mts IS h.264
but to avoid technical probs, Apple prefers to transode into intermediates, aic.mov for consumer editor, proRes for FCPX ....
there's playback-codecs and edit-codecs ... for instance, playback-codecs (mp2, h264, Sorenson, VP6 etc) do not store every frame ( ! ) to reduce file-size; now, you like to edit with frame precision ... what shall happen?
an edit-codec contains any solid frame ... = file-size mucho bigger ...

Why does Mountain Lion take a long time to shut down my MacBook Air when I chose "Shut Down?" Much longer than before the upgrade.

Mountain Lion takes a long time to shut down. Much longer then Lion.
Any comments appreciated.
Alan

The honeymoon is over?

Why does iMovie 11 take so long when looking in a folder?

A little bit about my configuration. Recently I manually moved some large video file folders onto my Mac from my PC. Some of those folders had mixed media (don't know if this makes a difference but I'm mentioning it) ... avi, mp4, mpeg.
When I do a File/Import and the finder window opens to find the files, sometimes it takes FOREVER (= 5min or more) for the file names in the folder to come up for selection.
What is iMovie 11 doing while that beach ball is spinning? It's a new iMac with the biggest processor and video card Ram available so I hope it's not a performance issue.
Thanks.
c

Welcome to the Apple Discussions. What type of Mac are you using? How much memory and free space on the hard drive? What mode, Events or Photos do you open first? If it's the Photos mode do you have the Event titles selected to be displayed and are they all open or closed?
Do you have sharing enabled, i.e. look for shared photos and share photos, selected in the iPhoto/Sharing preference pane? Do you have the Advanced preferences set to look up places automatically and why type of internet connection do you have?
OT

Why does iMovie 09 take so long to process imported film

This may not precisely be a question in the vein of "hey help me fix a crisis," but I am still a newbie to the new iMovie. I have used the old versions for years, making various projects. I got very comfortable with it. Now, though, I have to reimport a ton of old analog film (about 250 GB) due a dead hard drive (yes, sad times and another lesson in why you must have 2 copies of back-ups).
Anyway, in the old iMovie, you told the app to import and it did. If you had 30 minutes of film, then it took 30 minutes. Boom--done.
With iMovie 09, I spend the 30 minutes, and then when I tell it to stop importing, it then takes another bit of time (seems to be about 1/3rd or so of the original length) to then process the film. Can anyone tell me why? What is the point and how does it help me?
Then, is there any other way to import film into my computer besides iMovie?

It takes longer because iMovie has to create thumbnails for the media browser. It captures thumbnails every few seconds so that it can divide up the movie in the media browser for easier skimming and clipping. On my computer, it told me it would take 15 minutes to process a 32-minute Keynote presentation video export.

Why does my printer take so long to print one page?

i have an HP photomart C3180 all-in-one printer, everytime i hook it up to my mac and try to print something it takes about an hour to print one page, its super slow and its driving me crazy , im sure i have the right driver installed from apple for this printer, i dont want to install there CD cuz thats just more crap on my computer, i thought maybe apple's drivers would work. i have a Macbook pro, 10.8 if that helps in any way.
thanks

Get the latest driver from here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
What kind of file are you printing? from what program? Does this happen with plain text files from TextEdit? Have you asked HP support for their help?

Why does iMove '08 take so long to process video??

In iMove '06, I could record from my DVR into my machine, edit out what I didn't want, then immediately export the video to iDVD to burn it. The entire editing/burning process took about 1.5 hours. Now due to the fact that iMovie has to process the video for the media browser, the entire editing/burning process took almost 6 hours (for 1.5 hours worth of video). I find this to be very disturbing. My time is valuable & the new program is taking much, much longer to do the same things I used to do in about one fourth the time. I do really like the new editing feature, as it allows me to be much more precise than in iMovie '06. Is there something that I should be doing different?? I had iMovie use the 'medium' mode for the sharing preparation. Should I use the 'low' setting instead?? And, once I have finished my editing, is there a way to directly export the video to iDVD, without having to 'prepare' the video for sharing in the media browser?? Any input will be greatly appreciated. Thanks in advance.

It takes longer because iMovie has to create thumbnails for the media browser. It captures thumbnails every few seconds so that it can divide up the movie in the media browser for easier skimming and clipping. On my computer, it told me it would take 15 minutes to process a 32-minute Keynote presentation video export.

Why does Firefox 30 take SO LONG to install?

I have been trying to reinstall Firefox from scratch on this machine. However, it's taking so long to install I have now given up.
What was I doing wrong and what can I do to put it right? It should not take FOUR HOURS to even get half way through the install, surely? At one point I wondered if it was just looping around between download and install. I like running two browsers so I can test if websites showing down in one are working in the other. My choices are Firefox and Chrome. Well, they have been up until now, seeing as Firefox won't install in a timely manner.
I'm typing this in Chrome and using Windows 7 on a Windows 8 compatible year-old netbook. I am not willing to install Windows 8, so I'm hoping there's another option. I can't even get the Troubleshooting information widget thing to work so either me or the machine is really having a bad day.

Thanks. Now have my preferred second browser back. It took a while but it is now installed and working, which is more than you could say for the previous version I tried to install.
It still hasn't cured the root problem with the machine but at least I've proved that it was unlikely to be related to Firefox.

Why does mac mail take so long to load with icloud

Similar Messages

Maybe you are looking for