Why does MMS work only after turning the iPhone off and on for iOS6?
I got the new iPhone 5. When sending/recieving pictures i have to turn the phone off and then on. For sending, it works for about 5 minutes and then i can't send anymore. I tried turning wifi off and leaving data on, turning LTE and wifi off with data still on, and other combinations. The only time it works is when i just turned it on.
The message you are seeing is telling you that you do not have enough storage on your device. That has nothing to do with iCloud storage.
iCloud storage is storage on Apple's servers hosting your online iCloud account. The storage on your device is local and cannot be expanded - it is whatever you bought with the device (16GB, 32GB, 64GB).
You need to delete things on your device to increase free space on the device itself.
For example, if you have a lot of pictures in your camera roll, you need to sync those to your computer's photo management software and storage, then delete them from you iPad.
You can delete apps you no longer need or use. You can delete messages you no longer read or use.
Bottom line is you need to remove stuff from the iPad itself to free up more space.
Similar Messages
-
The screen of my iphone 4 is blank and the phone does not respond even after pressing the on/off and home button, the only reaction is the vibration felt when I plug in to charge the phone. What should I do?
This is the ipod touch forum
-
I was trying to fix the internet on my iPhone so I turned it off and back on, then it still wouldn't work so I i turned my iPhone off and now it won't turn back on. Now when it's plugged into the wall or the computer the Apple Logo comes up for about 6 seconds and turns off, then back on for another 6 seconds then turns off again and it just repeats, and it really frustrates me. What can I do to fix it?
I had a similar issue with my phone.....it just shut off and wouldn't come back on even thought it was charged. My daughter toggled the mute switch several times and then she pressed and held down the home and lock buttons. It worked......would be worth a shot.
-
Why does keyboard work only after restart
This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideasconnected via usb/wacom... software=10.5.8
thanks -
I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.
csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport -
After updating my iPad 2 to iOS 6, I cannot connect to my router. I have turned the router off, left off for a considerable time, turned the iPad off and on, reset the network settings, nothing works. Any other suggestions? It is obvious many others are having similar problems, so the iOS 6 looks like a loser.
I have just upgraded from a 3 to a 4S and now I can't connect to my wifi. I've tried everything, resetting network settings, switching to boot, renewing lease, rebooting, turning off cellular data etc etc. nothing works!! Very frustrating!
-
why can't i access my itunes anymore? whenever i click on it, it makes my laptop freeze/slow down to the point where not even ctrl alt delete works properly and i have to turn the laptop off and then back on to get anything done. it has been this way for the last 2/3 days now and i have uninstalled and reinstalled it but it doesnt work
Hello there, bobbiefromIRL.
The following Knowledge Base article goes over some great steps for troubleshooting your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
My iphone4 got wet and was working right after but I shut off and have in bowl of rice by dehumidifier. But now it only turns on when plugged in. If I take to an Apple store will they be able to tell me if it's salvageable ?
Apple will not attempt to salvage it. They will offer you a replacement iPhone 4 for $149.
-
I keep getting an error code 05 when I try to use certain modes on my Rebel T3i. It seems as though my auto flash is stuck. Is this a common complaint....and if so.....what is the answer to deal with this issue. I have followed the instructions of turning the camera off and back on....to no avail. HELP!!
Hi Hydra171,
The Error 5 error code indicates a malfunction in the popup flash mechanism.
If this is not cleared by turning the camera off, then on, your camera will require service to correct this issue.
You may set up the repair for your camera here.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
HP LaserJet P1102w will only print wirelessly if I turn the printer off and on again
I have 2 Laserjet P1102w that work fine printing through USB. However, I was hoping this printer could become the standard wireless printer for individual users in the office. I have setup 2 different printers wirelessly with their own static, reserved IP addresses and they are connected to our wireless access point (WPA). We have all laptops that are connected to the network via the same access point as well as through hard wired ethernet. In all cases, they are on the same subnet.
Once I connect any laptop to one of these printers wirelessly through either the "smart install" client or the latest regular installation exe off of HP's site, it will print fine initially. However, whenever I undock the laptop or even just wait a few hours, the connection will be lost and I cannot print. The queue just says "Error - Printing" when I print sometihng. No errors in the logs. The connection will come back if I turn off the printer and turn it back on. This is very annoying and will probably not be acceptable to the users.
So I wanted to do more testing and connected both printers to my laptop wirelessly and made sure they could print successfully. I opened 2 command windows and ran a ping -t on each IP address to see at what point the connection dies. The ping will reply until I undock and go from hard wired / wireless to just wireless.. then it will say "Destination unreachable" and I can't even access the web interface. Even if I redock to hard wired / wireless, I still can't print unless I restart the printer.
This happens on 2 different laptops with 2 different p1102w printers. Any clue as to what's going on here and how I can fix it?
Edit:
If I have both wireless and nic enabled, once I undock the laptop, the ping -t changes from replying to the ip of the printer, to replying to the address of the wireless adapter with "Destination host unreachable".
For example:
IP of printer: 192.168.2.95
IP of wireless adapter on laptop: 192.168.2.25
ping 192.168.5.95
Reply from 192.168.2.95
Reply from 192.168.2.95
*undock"
Reply from 192.168.2.25 Destination Host Unreachable
Reply from 192.168.2.25 Destination Host Unreachable
This does not happen if I disabled the nic and run only off the wireless card. So the workarounds are to either turn the printer off and back on if I undock every time, or disabled the nic.
At this point, I just want to understand why it is like this?Mowaffaq, you may want to determine whether you are making those changes in the master printing preferences (versus the adjusting the session printing preferences from within your application).
Click "Start", click "Printers and Faxes" (or "Devices and Printers"), right-click your printer, and select "Printing Preferences". On the "Paper/Quality" tab, you should be able to specify A4 as your default paper for all future print jobs.
Hope that helps. -
Why does my guides dissapear after i save my pdf and open it again?
Why does my guides dissapear after i save my pdf and open it again?
Basically i use guides a lot when creating or editing PDFs, however when i am done editing and i save my work and close it. The next time i open up the pdf to edit, my initial guides when i created the Pdf is missing. This is really annoying. does anyone know how to fix this problem?Yes go to preferences, and then click on security and privacy.
-
While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?
Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.
-
Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.
What operating system do you have on your computer?
-
WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?
WHY DOES PAGES CLOSE QUICKLY AFTER OPENING A DOCUMENT .DOC AND REPORTS ERROR?
HAVE YOU UPGRADED PAGES, WHATEVER VERSION THAT MAY BE BECAUSE YOU HAVEN"T TOLD US, TO THE LATEST VERSION WITH SOFTWARE UPDATE…?
AND WHY IS YOUR CAPS LOCK STUCK DOWN?
PETER -
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
since upgrading to 10.8, my wireless stalls out. The drop down under the wireless icon says “Wi-Fi: Looking for networks… and has a rotating gear. I have to turn the wireless off and then back on to get back on the internet. Does anyone have a solution? All iPhones and iPad and windows computers work fine.
Maybe you are looking for
-
I've started working on ebooks for my company, using print layouts in ID6, stripping them back to the basics and following the 'best practice' notes from Adobe and others. My test publication has front matter, followed by a Contents page and then the
-
Using the pre-configured SCCM 2012 SP1 endpoint protection templates for Exchange 2010?
I am looking to update the exclusions for SCCM Endpoint Protect clients performing server AV protection on Exchange 2010 nodes. Within SC there are a number of pre-defined templates, including ones for Exchange 2007 / 2010. However when I analyse the
-
All my templates for printing are made for 5x7 crops. So my cameras are all 4x6 crops and I want to import my images and have LR crop to 5x7. I've tried to save a 'preset' to save 5x7 but it doesn't save that crop? I can save everything else except
-
Is possible to change my Ipad?
I was wondering if its possible to change my Ipad 2 for the Ipad (gen 3) . If I could,how much do I have to pay? Thanks
-
I want to do RS232(115200 braud rate) and 5 channel(100H
z each) read simultaneously, what you think would be the best way. I have done some trials with the usual VIs you can find in demos however there is a delay which makes my RS232 data corrupted or my analog input read too slow to acquire the signal co