Why does MSI P4N have no support for Intel Preslor and Asus Nforce 4 does??
Well as you've probably guessed it im new to the forums (howdy all ). I currently own a MSI P4N diamond motherboard and quite frankly i most dissapointed with what has been called (by too many reviewers) a great board.
First off i see very little changes taking place with each bios update, of which does not seem to happen regularly at all. (lets face it no board is perfect especially the Nforce 4 range from MSI for Intel CPU's).
Secondly overclocking a Pentium D 830, which i may add should be capable of overclocking very well on an Intel Nforce board, can barley reach 3.4 Ghz (i know its mobo issue as the CPU is water cooled and overclocks to way beyond 3.7 on an 955X board).
Thirdly the North bridge fan was poorly stuck on my motherboard in that on installing my motherboard into my case it popped off like the lid of a pringles tub by a slight movement of my hand .
And last but least... why does the MSI P4N diamond motherboard not support Intels latest 65nm CPU's when ASUS's and Gigabyte's Nforce 4 motherboards work well with the Pentium D and the 65nm range of Intel CPU's. Upon also reading about the next gen of Intel CPU's the Conroe, the 975X motherboards will support the future CPU via a bios update and it has been said that the same is likely to happen for the Nforce 4 range... however once again due to the lack of support for the MSI P4N diamond by MSI i believe all of us owners of this pathetic (an over statement really but its going to be that way if MSI keeps this up) over hyped motherboard will get a simple NO in the CPU support table for the next gen range of CPU's.
Where did you get the information regarding the MSI P4N diamond's release date?
Are you in the United Kingdom? As it was released at the same time as the other Nforce 4 boards here (i was on the edge of my seat waiting for the Nforce boards to be released on overclockers.co.uk for sale) In the end though i bought my mothreboard in October, which is a good few weeks after release.
Is there any kind of SLI 32 on MSI's plans? this is what worries me as they have made a move in the 975X department but have not made any further developmentes in the Nforce range for Intel, which to the average joe kind of indicates loss of intrest in this field from the company.
I am overall pleased with my motherboard, when using a single core CPU, as overclocking was a sheer joy, but as soon as the dual core CPU went in the mothreboard behaves like a drunk man coming from a pub. I am aware that the Nforce 4 chipsets struggle with the dual core CPU's but surely Nvidia were informed by Intel about the dual core CPU's being released in the future.
Similar Messages
-
ive cracked my ipod touch 4g screen does my waranty cover accidental damage for cracked screens and if it does do i just take it into an apple store for repair?
The warranty does not cover accedental damage like a broken screen. However, some time the Genius at the Genius Bar of an Apple store will replace the iPod at not cost. Make an appointment at the Genius Bar and ask. If not under warranty, Apple will exchange yours for:
Apple - Support - iPod - Repair pricing -
Hello, I have an error while trying to add move music into my itunes library. 'The itunes library file cannot be saved. You do not have enough previledges for this operaion? help - what does this mean?
Hi luxmi01,
Here is some information and troubleshooting on the permissions issues you are seeing:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Cheers!
- Ari -
Why do we have separate apps for phone, messages, and contacts?
I'm trying to reduce the number of apps that I need to run, and this one just boggles my mind.
Why do we have separate apps for phone, messages, and contacts?
The messages is to tightly coupled to the phone, that it doesn't make any sense for them to be separate.
The contacts app is nothing more then looking at the contacts from the phone app.
What's the story here?
Does it have something to do with the contacts also being part of email app?
Actually, that's my other biff... why are they entangled as such?
Phone contacts should have phone#, email contacts should have email addresses.
If you want a contact to have both phone# and email address, then the two apps (phone/email) should be combined.The contacts app is nothing more then looking at the contacts from the phone app.
What's the story here?"
The forums would be full of people complaining that you had to go through an additional step ( opening the phone app) to get to contacts. I use the contacts app from the home screen far more often then I use it in relation to calling someone.
I like the way it is far more than the way you propose.
You can leave feedback for Apple at:
http://www.apple.com/feedback -
Why do I need a membership to install Lightroom 5 when I have paid already for the software and need to activate it and I will be finished?
you don't need a cc subscription to use the purchased copy.
download the installation file and use your serial number to activate when given the licensing option during installation. you should install 5.7 instead of installing 5.0 and updating.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'. -
Does Mail (Mavericks) have any limitations for size, numer of mailboxes, folders, messages, etc. ?
Ah, so you're not considering running OS X Server here, you're running OS X client and asking about the mail client — looks like both the Apple bot that suggested that support article and I were confused.
Mavericks Mail.app does have a few flakies that I've noticed but does work. If Mail.app gets confused, restart it and see if it's less confused. If the accounts get confused and start tossing the password prompt, remove and re-add the accounts. When re-adding the accounts, don't use the Internet Accounts path, use the Mail > Preferences path.
Do make a backup or two before the Mavericks upgrade, and most definitely configure and use Time Machine or some other backup tools after the upgrade.
If you do decide to go to server (which is where I'd thought this question was originally headed), then you can download everything to your own local server — that'll take some add-on software to pull the mail from your ISP, or a set of mail-forwarding rules to push the mail, and some command-line tweaks to relay the mail out (as you're probably on a DHCP dynamic residential IP address), but that'll work, too. -
On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.
My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
Appreciate suggestions.
[The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]Is your Yahoo account set up as POP3 or IMAP?
-
it says "waiting for changes to be applied? its been like that for 3 days and if it does sync all my music are grey and wont play on my ipod? any suggestions? im really getting frustrated ! -__-
Try:
"Waiting for changes to be applied": Apple Support Communities -
The iBooks page on my iPad2 has locked. I cannot move on the page. I can close the page, and everything else is working fine. THis happened in the middle of a download. Does any one have any ideas for unlocking, resetting, or somehow getting the iBooks page to work? Thank you.
Just re-set the App -
Open the App
Hold down the power button until the slider appears
Hold down the home button (Don't use the slider) Until the App Closes
You might lose your place, but shouldnt be too hard to find it again... -
Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?If that's the best you can do why don't you get on another forum?
-
I have an iMac 17" 1.83ghz intel core from 2006. I need to reformat the hard drive. Which system do I reinstall - the system disk in came with or can I install 10.6.8 which is what it's running now. And does the system have to be for an iMac?
Reformat usiing the original install disc then update to v10.6.8.
Mac OS X 10.6: Reinstalling Mac OS X -
Why do you not have a support phone number in the UK?
Why do you not have a support phone number in the UK? This is unacceptable. You are almost imposible to contact when help is needed. This seems to be the only way! Please let me have a number I can contact you on
These are user to user forums. If you need to contact Adobe Support here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/ -
Why do I always have "Insufficent Content for Edit" error message ?
Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
ThanksTom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks -
HT4623 I have a tmobile iphone 5 is their a reason why I don't have the update for ios7?
I have a tmobile iphone 5 is their a reason why I don't have the update for ios7?
Connect to itunes on your computer and try.
-
HT5691 Why can't I purchase applecare support for my iphone5 that was bought from ATT?
Why can't I purchase applecare support for my iphone5 that was bought from ATT?
not online like I usually do.
when I enter the serial number, it shows standard warranty with no option to purchase exended applecare+
Maybe you are looking for
-
PHP mail() function not working
Hello, I am having a problem sending mail with php while hosting my own website with apache on my mac. First of all I would like to note that I do not have a large background with web hosting and php. Everything that I did so far was just suggestions
-
Photos are suddenly all displaying as solid black images in slideshow
All my computer photos show correctly on the TV screen as thumbnails. When I click on one photo or click on slideshow, they all show up as solid black. As thumbnails they are normal pictures. Has been fine until today.
-
I was copying a data CD which had a bad file. When I hit the bad file, the message appeared "The Finder cannot complete the operation because some data in "the source file" could not be read or writte. (Error code -36)". When I click okay, the Copy m
-
hi, I need to run a cron job every alternate wednesdays...in a year Any suggestions???? Thnx, Enz
-
I don't know if its only in my head or not, but whenever I plug my iPod into my iHome, headphones, and my radio transmitter; I have to turn it up a bit more to hear it. The lack of sound is especially apparent when I watch movies (I can barely hear t