Why does my 12" Powerbook run 18˚C hotter than my 15" iBook?

Both computers have 1.33ghz G4 processors in them, and 1.25gb of ram. Both have OS 10.4.8.
The iBook runs at 44˚ C according to Temperature Monitor.
The PowerBook runs at 62˚C if not higher.
I recently had the PowerBook's internal power input replaced as it wasn't working. Perhaps this is the case?
12" powerbook g4 1.33 Mac OS X (10.4.6) 1.25ghz ram

Assuming you're measuring the processor temps, 62º C / 144º F is on the high side of where the Powerbook should be running, and is about where the Powerbook fans should be turning on. Given normal room temperatures, you should see lower temps, more in line with below 48º-54º C (120º-130º if my conversion is correct), depending on what's running.
If you haven't already, you might want to run your Apple hardware test to ensure your fans are working. Insert the first OS X CD that came with your system (should say 'AHT Vx.x' in small print), and reboot holding the option key down. Choose the Apple hardware test, follow directions, and choose the extended test. You should hear when it turns the fans on.
When your PB is showing 62º C, have you opened activity monitor (on your hard drive in applications/utilities) to see if anything is using 100% of your CPU? Do you have any print jobs that haven't completed, which can cause the system to use 100% of CPU while looping when trying to reprint?
If nothing shows up here, have you tried a safe boot (reboot holding the shift key down) to see if you still run at the same temps? A safe boot does some background disk maintenance and doesn't load any startup items. If everything seems OK, reboot normally. If the problem returns, you may have an issue with a startup item, which you can view in your accounts systems preference pane, under login items.
Your Powerbook does use the case bottom as a heat sink for the processor, so the bottom may feel very warm (which is why Apple says to use it on a flat surface, and not a blanket for example, to ensure proper cooling).

Similar Messages

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Oh, PLEASE IGNORE the line:
deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
That was left there inadvertedly. Can't seem to find the edit button here...

Why does AAM Updates Notifier run so much?

Why does AAM Updates Notifier run so much? It seems to really be working my hard drive.

AAM updater launches automatically as you start the computer, so you can try preventing it from auto launch as per the operating system.
Though it is not recommended much. you can check it is Re: How to deinstall AAM Update Notifier
Moving it to download & install for resolution.
Regards
Rajshree

Why does my Mac Mini running on Mavericks so slow to start and load apps?

Why does my Mac Mini running on Mavericks take so long to start and load apps?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Why does my mac mini run great for first half hour then run so slow almost to a stop?

why does my mac mini run fine then after a half hour runs very slow?

EtreCheck version: 2.2 (132)
Report generated 4/30/15, 3:58 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Click the [Click to remove] links for help removing adware.
Hardware Information: ℹ️
    Mac mini (Late 2012) (Technical Specifications)
    Mac mini - model: Macmini6,1
    1 2.5 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 4000
        Thunderbolt Display 2560 x 1440
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 7:15:27
Disk Information: ℹ️
    APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (475.54 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. IR Receiver
    Apple Inc. Display Audio
    Apple Inc. Apple Thunderbolt Display
    Apple Inc. FaceTime HD Camera (Display)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
        Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
    Mac App Store and identified developers
Startup Items: ℹ️
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [loaded]    com.macpaw.CleanMyMac3.Agent.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [not loaded]    com.jdibackup.JustCloud.autostart.plist [Click for support]
    [loaded]    com.jdibackup.JustCloud.backupstart.plist [Click for support]
    [loaded]    com.jdibackup.JustCloud.notify.plist [Click for support]
    [loaded]    com.macpaw.CleanMyMac3.Scheduler.plist [Click for support]
    [running]    com.spigot.SearchProtection.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    CleanMyMac 3 Menu    Application Hidden (/Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: Java 8 Update 45 Check version
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Slick Savings Adware! [Click to remove]
    Ebay Shopping Assistant Adware! [Click to remove]
    Searchme Adware! [Click to remove]
3rd Party Preference Panes: ℹ️
    Fan Control [Click for support]
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         4%    WindowServer
         2%    fontd
         0%    taskgated
         0%    notifyd
         0%    cloudpaird
Top Processes by Memory: ℹ️
    836 MB    kernel_task
    82 MB    WindowServer
    66 MB    JustCloud
    66 MB    SubmitDiagInfo
    66 MB    loginwindow
Virtual Memory Information: ℹ️
    12.00 GB    Free RAM
    4.33 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    Apr 30, 2015, 08:42:48 AM    Self test - passed
    Apr 29, 2015, 09:04:50 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-04-29-090450_[redacted].crash

Why does my iphone 4s run out of battery so quick?

Why does my iphone 4s run out of battery so quick?

What do you mean by 'quick'? If you mean a few hours then I think it is normal (it's normal for me: 4+ hours for me depending on what I use it for). If you play apps with really good graphics it will make the battery go quicker. If you don't use it for much, then the battery might have gone out-of-sync with the battery percentage it thinks it has (I am not sure if this happens with apple devices though)

Why does the iPad 2 run out of memory

Why does the iPad 2 run out of memory?

First ...read deggie's response. Makes sense - even a computer running a large amount of RAM can run short on memory depending upon the operation you are performing so sometimes you have to do what is available to "clear" the memory.
You can ...close apps and restart the iPad on occasion. You close apps by double tapping the home button to bring up your recent apps in the multitasking tray. Tap and hold down on any of the icons until they all begin to wiggle. Then tap the minus signs in the corner of the apps to close them. Close all of your apps in that area. Also take note of how many apps are down there. That may have something to do with why the iPad is running out of memory. Tap the home button twice to return to the home screen. Then restart your iPad by holding down on the sleep button until the red slider appears and slide to shut off. To power up, hold the sleep button until the Apple logo appears and let go of the button.
If you do this once in a while, it may make a difference in how your iPad performs. In any event, it will not hurt anything.

Why does Magic Mouse use much more battery power than the keyboard?

I have the Bluetooth versions of the keyboard and the Magic Mouse. I use the same rechargeable batteries in each. Yet the mouse has now come to the end of a THIRD set of AAs, while the keyboard still has 60% of its first set.
Why? They are both constantly in use, so why does the Mouse drain batteries so much faster than the keyboard? Viz: the mouse about once a week (two, max), while at this rate, it will be another month or more before the keyboard drains.

Actually I don't! I consider myself a 'power user' in that I will always use the keyboard first, and I learn keyboard shortcuts for nearly everything I do regularly.
I would guess my use is 50:50 at worst?

Why does my iPhone 4 have a different Model # than those on display at Appl

Why does my iPhone 4 have a different Model # than those on display at Apple?
I noticed while in my local Apple store today that their iPhone 4's have a higher Model # in their Settings --> About screen. When I compare mine vs. theirs, why is my Model # lower?
My biggest fear is that Apple will secretly correct the hardware issues on the iPhone 4 & screw over everyone who bought it early by not doing a recall since it would cost them an arm & a leg.
See screenshots of both units compared:
http://yfrog.com/md88epx

They are basically batch numbers as posted by several forums other than Apple. One forum in Canada listed 8 batch numbers of iPhones residing in their country with the last code of "C/A". Mine is "LL" for some reason in the USA. I would have thought it would be "US" but there is probably a more detailed thread on this code choice by Apple.
Also review this Apple thread for more:
http://discussions.apple.com/thread.jspa?threadID=1674986&tstart=523

Why does it take iMovie longer to import video than the length of the video? For example- it took 2 mins and 15 secs to import 2 mins and 4 secs of video...

why does it take iMovie longer to import video than the length of the video? For example- it took 2 mins and 15 secs to import 2 mins and 4 secs of video...

It's not like playing a tape. It has to convert it from whatever format you currently have into a codec suitable for editing (Apple Intermediate). This will take longer or shorter depending how compressed your original format is, and on the ability of your CPUs to catch up.
Matt

TS2755 Why does my iPhone send my text message more than once

Why does my iPhone send my text message more than once

settings - message - send&receive - make sure your cell is the default
then starte a new converstation from - your cell number

Why does it take longer to download a movie than to watch it

why does it take longer to download a movie than to watch it???

Most likely reason is a slow internet connection.
Test is at speedtest.net on a computer, you need 6 Mbps for instant HD.
AC

Quad G5 - One processor runs 20 degreesF hotter than the other!

I use an app called Hardware Monitor to keep tabs on the various sensors in my G5. Today, for apparently no reason at all, CPU A (both cores) runs 20 degreesF hotter than CPU B!!! Not to mention 20 degreesF hotter than they ever did in the 4 months I've had the system. It does not matter if the computer is idle or if I give it a heavy work load, CPU A is always about 20 degrees hotter (it varies about 5 degrees -- for example, A is 122.3dF right now, and B is 103.0dF). I did a clean OS install on a different drive and took readings again, sure enough, it is the same. I removed all peripherals, check inside for dust, debris, etc... I can find no reason why this would happen! So far it has not been a problem, all the fans and pumps run at normal speeds. In the past my temps varied from about 98dF when idle, to about 150dF when under heavy load. CPU A now is 122dF - 165dF! Anyone have any ideas?

This is only speculation, but it may because your coolant is not flowing at peak efficiently. What could cause this? There are micro-channels the coolant flows through to cool the processors. They may be starting to clog up for some reason or another. If the processors get to hot, the unit will go into thermal shutdown, so you don't need to worry -- yet. I would keep your eye on it and if the unit shuts down while you are working on it, check your logs for lines with "thermal" in them and get the unit looked at. Your LCS may need to be replaced at that point.
Also, make sure you have/get AppleCare!
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
 An Apple User Group 
ITMS: MacOSG Podcast >>

Why does NiVisaServer.exe is running when Labview is running??

I am running two identical test setups for some system testing. The PC configuration and test cases are same on both the setups. I am using Labview version 8.5 . I observe the setup running with NiVisaServer.exe is slow as compared to the other setup. The same file is not running in the other setup. My question is , does NiVisaServer.exe slow down the Labview execution?? Why does NiVisaServer.exe is not running in the other tester eventough both are identical??

More than likely it might have been accidentally set to start up when the PC starts. See attached screenshot for where this is configured in MAX.
Attachments:
VISA Server.png ‏85 KB

Why does apple mail keep running on my system, i never use it

My macbook pro runs Lion, the latest version.
For some reason, apple mail program starts up, and it is a program I have never used, nor do I plan to.
I made a trip into the store and they did a quit, but of course, that doesn't solve the problem.   No real
answer for why its starting, who/what starts it, and how to prevent it.
Each time its running I have to click 2-3 dialogue boxes before it will let me quit, and it prevents the machine
from going to sleep if its running and I'm not aware of it.
Apple told me they were using the mail program to synch between the iphone and the machine.   Although I did
install cloud, I do not use it. My machine has so many problems, ever since I bought it, and I have had so many
trips to the apple store, without real explanations or solutions.   What has happened to the great produce we
knew and loved?    Complexity and the post-modern era are upon us.
I have logged 71 hours of tech support time on the iphone, so I no longer work on trying to solve that problem.
I actually work for a living and have no time for this.   The sad thing is I am in a position to recommend products
for my employer and some major new budgets in the health sector. I loved my mac for years and years.. always
buying a mac, making arguments for macs when all around me had pc's, etc.    Now I am starting to doubt the mac.
I hope that by participating in the mac community there will be some simple answers, and I don't have to spend HOURS
of frustration for things that should not be a problem in the first place.    We bought apple one-one, but the website never
works, and although they told me to call to make the appointment, it is just the general number and there is 45 minutes
of scratchy music with someone who does not know how to make one-one appointments....
Sorry to ***** and moan here....       I'm sure I'm not the only one having these frustrations.

etresoft, I think you are being unnecessarily harsh to gloriastitz. She is frustrated and doesn't understand computers at the level you do. What she is experiencing is frustrating, so she is frustrated. I have been a help-desk professional for over 15 years now, and emotions are part of the business.
I know it has been over 6 months since gloriastitz posted her reply. I hope she got a useful answer, but I fear we have satisfactorily scared her away from seeking help.
So, the first best response to tell someone is that the problem they are experience is almost certainly fixable, but may require more information to solve. You tell them you understand their frustration (even if you personally don't experience frustration or don't understand why people my express frustration publicly about a problem that frustrates them). It's just good protocol.
Then you work with the person to break down the problem into steps. If you don't have a ready answer and don't think you might even know the answer with sufficient data, then back out and leave it to others to tackle.
I've been having a similar problem with my Mail program. The cause is still unclear to me after vieweing the logs and changing settings where I know them to be. There appears to be a setting that is not clearly placed in any of the typical UI locations for initiating the desired action for either a feed: or mailto: call.
etresoft wrote:
gloriastitz wrote:
I'm sure I'm not the only one having these frustrations.
I think you are. This is not a place to rant and complain. It will just encourage people to give you unhelpful responses. If you want to complain, go elsewhere. If you want help, ask for it.
For example, can you explain what those dialog boxes actually say? Regardless of who is starting Mail, it will not prevent your machine from sleeping.

Why does my 12" Powerbook run 18˚C hotter than my 15" iBook?

Similar Messages

Maybe you are looking for