Why does my 3850-24T-E running 3.6.2aE with IP Services licence not support GLBP?

Hi all,
Just upgraded two 3850-24T-E's to 3.6.2aE (cat3k_caa-universalk9.SPA.03.06.02a.E.152-2a.E2.bin) and I have triple checked that the IP Services licence was loaded from factory.
Even although the Cisco Feature Navigator says that 3.6.0E supports GLBP (See below) I can't execute any of the 'glbp' commands in interface configuration mode so obviously it's not supported:
ukxxxxAAxx01(config)#int vlan 100
ukxxxxAAxx01(config-if)#glbp ?
% Unrecognized command
ukxxxxAAxx01(config-if)#glbp
Can anyone explain what I'm missing? 3.6.2aE isn't available in the feature navigator - is it SO different from 3.6.0E?!
Thanks!
James.

You're going to have to give us more information to work with.
1.  When did this start happening?
2.  Have you added anything new to your system before this problems started?
3.  When did you put Google Chrome Helper on there? XScan?
4.  What other apps or functions are working strangly on there? 

Similar Messages

  • Why does LabView crash when I run it in parallel with a temp/ RH logging probe?

    I am running LabView 6.1 on windows 95. Up till now I have had no problems. However, we recently acquired a Temperature / Humidity probe which plugs into the Com1 port of the computer and logs the data using it's own software. Since then, when the two programs are used together, eventually LabView crashes with the following error message: Failure, 'image.cpp, line 5793.
    Can you tell me why this occurs and what the solution is?

    Taking a shot at this. It could be because the two programs are trying to access the same type of logging program(excel??). Only one link can be active at a time or they crash. Try running it without saving the data and see if it crashes.

  • Why does my iPhoto open and run slow since upgrading to OSX 10.8.5

    Why does my iPhoto open and run slow since upgrading to OSX 10.8.5?  I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.

    Why does my iPhoto open and run slow since upgrading to OSX 10.8.5?  I have an Imac - Intel 2.5 GHz quad core I5 - with 20 GB of memory. Before the upgrade it was much faster.

  • What is application memory and why does my macbook pro keep running out of it?

    what is application memory and why does my macbook pro keep running out of it?

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

    Why does it say "The configuration data for this product is corrupt. Contact your support personnel." when trying to install itunes64installer on my b4 bit windows 7 acer pc? Any help would be much appreciated...

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Why does Apple iPad Camera Connection Kit no longer work with iOS8

    Why does Apple iPad Camera Connection Kit no longer work with iOS8?

    The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised

  • Why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • On my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

    on my mac why does it take so long to send a Email with an attachment, on my mac why does it take so lone to send a Email with an attachment

    It depends on the size of the attachment and the speed of your internet connection.
    Next time you send an email with an attachment do these two things:
    In Apple Mail (I assume you are using Apple Mail), under the Window menu select Activity. Arrange the Activity window so you can see it.
    Then open the separate application located in the Utilities folder called "Activity Monitor" and arrange it so you can see it at the same time as the Activity window in Mail.
    In Activity Monitor program, select the tab labeled "Network." Watch the "Data sent/sec" portion. Then send your email, while watching the Mail Activity window and also the Activity Monitor program window Data sent/sec area.
    You should see the mail being sent with a progress bar in the Mail Activity window and also you should be able to see how many bytes/sec or KB/sec or MB/sec your internet connection is giving you in the Activity Monitor window.
    Example: my internet provider gives me about 20 Megabits per second download and 5 Megabits per second upload. To convert these to Megabytes per second (Activity Monitor shows things in bytes, not bits), simply divide by 10 (not the exact thing to do, but close enough). So I get 0.5 Megabytes per second upload speed. When I send a file that is 5 Megabytes in size, it takes about 10 seconds if I am getting the full upload bandwidth. If I am getting less than that (which sometimes happens), it will take proportionately more time. Either way, you can see what is happening with these two windows.
    If your internet provider is supposed to give you, say, 5 Megabits/sec upload (0.5 Megabytes/sec), but you see only say, 5 KB/sec (=0.005 Megabytes/sec), sent in Activity Monitor, then your emails are taking a long time because you are getting only abut 1/100 the speed you should be. You might want to check with your internet provider about that.

  • Why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

    why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

    Probably Spotlight is indexing your HD? To stop this indexing, have a look here:
    http://www.thexlab.com/faqs/stopspotlightindex.html
    marek

  • Why does my iMac panic and crash when I scroll with my magic mouse or trackpad

    Question Why does my iMac have kernel panics whenever I scroll with my magic mouse or trackpad

    Sorted....needed a new logic board...£800... thank god for applecare

  • Why does this site have online chat when you can never actually chat - always "not available"?  I was trying to get a simple question answered without calling and being on hold for 10 minutes?

    Why does this site have online chat when you can never actually chat - always "not available"?  I was trying to get a simple question answered without calling and being on hold for 10 minutes?

        Hello flabucki,
    Help is just a post away for you my friend! I can help with your questions right here. May I ask what question do you have? Both myself and the community would love to assist in any way that we can.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Why does iPhoto start up every time I start the computer. I have not checked any box at shut down.

    Why does iPhoto start up every time I start the computer. I have not checked any box at shut down.
    Thanks,
    Bill

    Is it on your Log-In items?
    Do you have a disk or device formatted like a camera card attched to your computer - say with a FAT format?

  • Why doesn't my iPhone connect to tv? Keeps saying "this accessory is not supported by this iphone"

    Why doesn't my iPhone connect to tv? Keeps saying "this accessory is not supported by this iphone"

    I assume you are running ios 8.x.  It's a bug.
    Wait for a fix from apple.   ... OR ... You could buy a new Apple brand connector. The latest connectors will work, even the older apple brand connectors do not work.  OR try re-booting your ipad. OR wait until the video starts then attach the connector.
    more info here:
    Re: 30 pin to VGA adapter won't work since iOS 8
    unable to use HDMI adapter after iOS 8.0 upgrade

  • I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

    I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
    It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

  • Why does Firefox have to make it so difficult to get answers--I am not going to be able to check the website to see what anyone might reply to my question on crashing?

    I have no way of checking to see if anyone answers this. Why does Firefox have to make it so difficult?
    What does this means: DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
    Suddenly all my tabs closed. Then Windows told me I had a gazillion infections. Then a tiny strip appeared saying it was Firefox and these little blocks started to fill up the little strip as if it were downloading something--there was no way to cancel this so I cut the power. Now when I try to use the Firefox icon, I get the message above.
    Am I supposed to remove the old Firefox stuff and start from scratch? I am stuck using Internet Explorer.
    I went to the Firefox website and tried to download it again, but McAffee jumped in and said there is something wrong with Firefox and I should register with them that I am downloading Firefox (I do not have McAffee). Then I got a security warning saying Firefox is not safe.
    I am completely at a loss as to what to do next, since I don't understand any of this mumbojumbo.

    Here's the story on one of your infections, namely JS:Redirector-EH[Trj]: http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Trojan%3aJS%2fRedirector.H
    The main problem with malware is that it uses the installation to proliferate by contacting hostile servers to download more of the same rogue code.
    Firefox doesn't have the option to "Run" a file. You can only "Save File" or "Cancel". If you downloaded it with IE8, then yes, you can run it, but that's not what I wanted you to do.
    What you should do now is to disable System Restore. You can open System Properties by hitting the Windows logo key and Pause/Break key together. Then click the "System Restore" tab. Then checkmark the box which says "''Turn off System Restore on all drives''". Reboot to clear its contents. System Restore unfortunately makes a backup of all executables which includes viruses so that when you reboot without deleting them first, System Restore reinstates them again.
    After you complete that step, run Avast and Malwarebytes again to make sure the system is clean.
    Then go to the Windows Update site (link on your start menu) and install the missing patches which enabled your machine to become infected in the first place.
    Once the system is clean, repeat step one to download Firefox again, but please do not run the file. If you don't see the option to "Save File", cancel the download, but it should be there. You can use this direct download link to download FF4.0.1 [http://www.mozilla.com/products/download.html?product=firefox-4.0.1&os=win&lang=en-US Download Firefox 4.0.1]
    Run the file after you download it to the desktop.

Maybe you are looking for