Why does my Airport Extreme Base Station keep appearing as a Shared device?

After installing 10.5 my Airport Extreme Base Station keeps appearing with a Windows PC icon under the SHARED list in the Finder, and I don't have a hard drive attached. Does anyone know why it's appearing, and how I can make it go away?

Even more weird in my case, I have the Airport Extreme show up twice under Shared. One shows an icon of the actual Airport Extreme which is the one that has the hard drive attached and that works fine. The second is named Airport-Extreme and has an icon like its a PC. lol Not sure what's going on here but if you ask me the first one should be there because that makes sense, but I have no idea why the second one is displayed. Must be some sort of bug.

Similar Messages

Why does my AirPort Extreme Base Station lose the internet when I unplug my printer Ethernet cable?

I just changed ISPs to Qwest from Speakeasy. New modem. Now my etherneted (from extreme base station) printer (Brother HL1870N) doesn't work.
And if I unplug the printer ethernet cable from the base station, the base station loses the internet connection.
Any help would be appreciated.
thanks

whats the version on your airport extreme and what renerations is it?

Why does my Airport Extreme Base Station not recognize my iProDrive powered external hard drive?

My 500GB iprodrive is recognized when connected directly to any of my computers just fine. My AEBS recognizes flash drives just fine. But the two together don't work. I have tried reformatting to exfat, msdos(fat), extended, extended journaled, none work. Its a powered drive so I'm assuming thats not the problem. Help?

Its a powered drive so I'm assuming thats not the problem.
I have to use a powered USB hub with a 1 TB LaCie hard drive when I connect it to the AirPort Extreme, otherwise the drive is not recognized.
However, I can connect the same hard drive directly to my MacBook Pro and it works just fine without the powered USB hub.
Try formatting the drive in Mac OS Extended (Journaled), also known as HFS+, and try using a powered USB hub when you connect the drive to the AEBS.
If that still won't work, then you have to assume that the drive is just not compatible with the USB port on the AEBS.

HT3546 Does the Airport Extreme Base Station not work with the OS X Lion?

Ever since updated to OSX Lion can't get our airport station to work. Is it too old and won't work with this upgrade so do we need a newer airport?

Suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion which should work with your older AirPort Extreme.
You can keep both AirPort Utility 6.1 and 5.6 on your Mac and use the one that you want or need at the time.

Macbook w/Airport Extreme Base Station

I have a Macbook that I just bought 3 days ago. Like everyone else, I am having the same problem with wireless encryption.
However, when I turn off the WPA and just use WEP, I can connect but it seems to lag. What I mean is everytime I browse, it's almost like my computer needs to "reconnect" with the router. If I stay a a site for more than a couple of minutes the connection kind of goes to sleep. It shows I am connected but it just sits there, sits there, and then connects. When I am on WPA or wired I do not get this.
So, for my actual question, does the Airport Extreme Base Station have issues like this?
On Apple.com, people are giving it glowing reviews. On the net, the reviews are marginal at best.
Current Setup:
Macbook
Linksys WRT54GX4 w/SRX400
Thanks in advance!

I have several Linksys routers and also an Airport Extreme Base Station. I like the Linksys better. The AEBS has arguably better output power than my Linksys, but in my 1600 square foot house, it doesn't matter.
I also have a Macbook c2duo running OSX 10.4.10, and it drops off the AEBS just as much as any other router.
The downside of the AEBS is that it doesn't have a native web based management system. You've got to use the management tool to deal with the AEBS using SNMP protocol. It'd be nice if you had to manage 100 AEBS, but is a nuisance for home use. I found the latest realase of Airport utility (v5.2) to be very buggy on Windows XP - it killed my PC's abaility to negotiate a DHCP lease until I downgraded back to version 5.1. I ultimately went back to using my WRT54GS. The Linksys has lower throughput, but that only matters for specsmanship. The other thing is that Linksys can do multiple PPTP VPN pass through, but VPN pass through doesn't work on the AEBS unless you use bridge mode and static IPs.
I spent the cash for the AEBS, but in retrospect I would have rather put it towards memory upgrades, etc.
Bill

Using Airport Extreme Base Station As A Wireless Card?

Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station. So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Thank you in advance for any help with this.

Ernest Lohrer wrote:
Hi,
I don't know if this is even possible but here's what I'd like to do:
I've started to share an internet connection with a cousin of mine that lives in my apartment building. The connection is in her apartment and as far as I can tell the wireless signal is coming from the modem she has, there is no stand alone router/ base station.
She has an "integrated" modem/router/access point.
So far I've just been connecting using my iBook with the aiport card in it. No problems. I just had to get the ip number and password from her and I was hooked right up.
Here's my real question:
I also have a G4 Mini with no wireless card in it at all and an Airport Extreme base station from before we started sharing a connection. In the time that we've been sharing I haven't connected to the internet at all using the Mini. Now I'm wondering if there is a way I can hook the Airport Extreme to the Mini and somehow use it as a replacement for a wireless card in the Mini. Thus using the Mini connected to the Airport to connect just the Mini to the internet.
I'm not worried about the iBook and do not wish to reconfigure the way I'm using/ connecting with it. Everything is peachy with that.
If this is possible, how can I do it?
Set up the AEBSn as a "bridge" and connect the G4 Mini to one of the "wired" internet connections.

Why does the new Dual-Band AirPort Extreme Base Station act as a proxy?

The previous thread
http://discussions.apple.com/thread.jspa?threadID=1531675
has been archived and nothing came of it, but after testing, I'm certain that their findings are true.
The Dual-Band AirPort Extreme Base Station (AEBS) with firmware 7.4.1 acts as a proxy for TCP ports 21, 554, and 7070 when NAT is turned on. This can be verified by using Nmap on any external server known to NOT have the ports open and having Nmap return that the ports are open. You can telnet to these ports to verify that they're "open," even though they are not on the server.
This functionality appears to be undocumented and as far as I can tell, the only way to turn it off is to put the AEBS into bridge mode and having some other device do NAT further upstream.
As a computer professional, this functionality extremely undesirable, particularly since it is not documented and doesn't have an "off switch." I wasted a bunch of time with one of my network engineers because of this, thinking that some network router was spoofing our server. I also wasted a bunch of my time trying to detect whatever "stealthy rootkit" had opened a FTP server and some other botnet related ports on our server, when in reality, it was simply my AEBS tricking me.
Disabling NAT-PMP ("Enable NAT port mapping protocol") does not affect this.
Is it too much to ask to have a checkbox in the "Advanced" section of the AirPort Utility to turn this feature off?

Welcome to the discussions forum Michael Bennett2.
Thanks for investigating this odd behavior.
If you want your work to be noticed by those who can effect change, you'll have to tell Apple via their feedback link. It won't do any good to post it here.
http://www.apple.com/feedback/

Macbook does not see airport extreme base station

Hi
I set up my airport extreme several years ago. I recently noticed that, under "security," the guest network says "WPA2 secured," but the main network says "none." Is this a problem; i.e., does the main network lack security? Further, when I open the airport utility, it cannot find a base station.
What am I doing wrong?
Thank you!
ron

Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
Any help would be greatly appreciated.

RANT: Why is there no power button on the Airport Extreme Base Station?

I know there is no solution to this until Apple updates the next generation of Airport Extrem Base Stations; hopefully they'll add a POWER BUTTON to it.
I like to turn off my base station when I'm not at home and the only choice I have is to pull the plug out of the back. Why? Two reasons: cut down on my energy bill and SECURITY.
Not that it really uses much energy, but I'm doing the environmental thing here. And my network is password protected, but I just feel more comfortable having it turned off when I'm not there.
So, does anybody feel the same as me about this?
PowerBook G4 Mac OS X (10.4.5) My first Mac was a IIcx. Those were the days!

Really an airport
being tunred off for the time you dont use it isnt
going to save the environment that much I am sure
there are plenty of environmental accidents that ruin
your hundreds of hours of energy use over the years
in mere seconds.
I'm not just thinking of myself when I speak of the environment and energy use. If everyone that has an Airport Network at home turned it off when they were not at home, I think it would make a significant difference. People need to think nore of their impact on the world instead of viewing just their one little piece of it.
It's like the people who leave their desktop computers and monitors on all the time. Turn the friggin' things off if you're not there and if it's not performing any function. Those devices are just eating up energy.
PowerBook G4 Mac OS X (10.4.5) My first Mac was a IIcx. Those were the days!

Does firmware update 7.1 break the Airport Extreme Base Station?

Does firmware update 7.1 break the Airport Extreme Base Station?
See Digg
http://www.jayhaynes.net/2007/04/donot_install.html
April 10, 2007
Do NOT install AirPort 802.11n Firmware 7.1
This Firmware 7.1 update for AirPort Extreme Base Station with 802.11n should definitely NOT be installed.
Here was my problem:
I used AirPort Utility 5.1 to install the update. It is automatic - launch the utility and it asks if you want to install the update. I said yes because I had problems getting two AirPort n base stations networking together to extend my range (I gave up finally and just used an AirPort Express to extend the range).
After the firmware update, some sites would not load at all (www.nytimes.com) and others took forever to load. And worse, I could not send any email from any of my IMAP accounts. It seemed to be a DNS problem.
I have two 802.11n AirPorts, so I finally went back to the other one (7.0) and everything worked fine. The Apple tech support guy offered to replace my broken (7.1) AirPort.
Foolishly, I wanted to make sure the problem was actually with the 7.1 update and not the AirPort itself. So I updated my second 802.11n base station with 7.1. And it casued the exact same problem (some sites not loading, no outgoing email).
The Apple tech (at this point I was speaking with a wireless specialist) put me on hold to test a few of his AirPorts to see if he could revert back to firmware 7.0 or (ii) install a clean version of 7.1 (in case the version on my drive was corrupted).
Unfotunately neither option was possible, which is a design flaw in AirPort Utility.
Apple is sending me two new AirPorts in 1-2 days, which is great service, but I will not be installing firmware update 7.1 again. Fool me once...
http://www.apple.com/support/downloads/airportextremebasestationwith80211nfirmwa re71.html
AirPort Extreme Base Station

Turns out that the firmware 7.1 does not render the AEBS useless.
My problem was resolved when I turned off my DSL modem, the AEBS and the computer. Then restarted in same order going to the next one after the first is compeletly up and running. I had no problems whatsoever after that.
Seems that the firmware update makes the IPs 'stick' somehow. I would think that even a reset of AEBS might have done it but I never got to that stage.
All my computers came alive in no time.
I suggest Smith tries this. Simply reset the whole network. Ah yes, my cable modem has an internal battery, I needed to disconnect this too. Only then did the modem go into the 'acquiring' or 'distribution' mode.

Airport Utility does not see Airport Extreme Base Station

Purchased Airport Extreme yesterday at Apple Store to replace old Netgear Router. Wanted wireless network to work with 2 identical HP Laptops running XP with SP3 and 2 iPod touches, and possible future purchases of iPad 2 and Apple TV. Installed Airport Utility software from CD on Dell Studio running Windows 7. Connected Airport Extreme to cable modem and Dell Studio. Ran Airport Utility software to configure Base Station but it did not recognize the Base Station. Base Station had blinking amber light. Did have internet connectivity on Dell Studio, and wireless internet connectivity on 2 iPod touches, and on one HP Laptop. No wireless internet on other HP Laptop. But wireless internet connection was unsecured and Airport Utility did not see Airport Extreme so could not configure it to make it secure. Contacted Apple Customer support. After 30-40 minutes of attempting several different possible fixes only able to use Airport Utility to configure Airport Extreme remotely, wirelessly, from one HP Laptop, not the Dell Studio that is directly connected to the base station. Now that the base station is configured the network is secure. However, second HP Laptop cannot connect to primary wireless network. I created password protected "Guest" network using Airport Utility, and laptop is able to connect to this Guest network. From reviewing forums am now able to configure Airport Extreme with Airport Utility by using "Configure other" on Dell computer. But utility cannot find device by scanning. Would like to find way to (1) have Airport Utility on Windows 7 Dell see Airport Extreme by scanning and not using "configure other," and (2) have 2nd HP Laptop connect to primary network and not "guest' network. Any assistance would be greatly appreciated. Thanks.

Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
Any help would be greatly appreciated.

IMac does not see Airport Extreme Base Station wirelessly

Trying to use my existing PC hooked up to Airport Extreme BS via ethernet cable, which works fine. I then open Airport Utility on my iMac and it scans for wireless devices but it can't see the AEBS (located beside it). Opening Base Station tab and there are no solid headers to click on, just the soft grey headers. I am fairly new to Apple product so if I've left any info out to further troubleshoot please let me know.
Eventually I would like to connect my Apple TV, located downstairs, wirelessly as well as use an Airport Express (wirelessly) to boost the signal if need be due to concrete walls and floors in construction of house.
I have OS X Version 10.5.8 (up to date), Intel, Airport Extreme Wireless Card.
Thanks for any help out there.

Bob - Thanks so much for your quick reply. I followed your suggestions and, to go into perhaps unnecessary detail, I'll write what I did. I completely disconnected the Airport Extreme Base Station (AEBS) from my computer. I disabled Windows Firewall, uninstalled my anti-virus program, and uninstalled Airport Utility and Bonjour, recycled by cable modem (took out the battery and unplugged it for about 20 seconds), then restarted my computer. After the computer booted up, I verified that windows firewall was disabled, reinstalled Airport Utility and Bonjour, then reconnected the cable connecting the AEBS to the computer (to one of the three ethernet ports, and I tried each of them in case one was faulty) but not to the cable modem as my firewall was disabled and had no anti-virus software. I also reconnected the AEBS power chord. I opened the newly reinstalled Airport Utility software and it did not find the base station. Only when I used "configure other" was I able to access the AEBS. I recycled the modem again, but that did not help. I turned on the firewall, installed anti-virus software, connected the AEBS to the modem, the light turned green, and I was able to access the internet on the primary computer and the wireless network gave me internet access on my laptops. But I was still not able to have my main computer, the one directly connected to the AEBS able to see it, and configure it, without utilizing "configure other."
Also, any idea why one of my laptops can only access the "guest" network? When it attempts to connect to the primary network it will stay on "acquiring network address" for what seems a few minutes, then switch to the "guest" network and connect immediately.
Any help would be greatly appreciated.

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

Problem consistently printing via new (summer 2011) AIRPORT EXTREME BASE STATION and Brother wireless printer (model HL5370DW). What am I doing wrong?

Thanks in advance for any help you folks can offer. I'm a newb here and will try to offer as much detail as I can about the dilemma at hand.
Scenario: Home network has been recently set up for wireless internet access via NEW Airport Extreme Base Station (purchased September 2011). Units accessing the network include: 2011 Macbook Pro, 2011 Macbook Air, 2007 Macbook, 2009 Macbook Pro, 2 iPhone 3GSs, and a 1st-gen iPad (and a partridge in a pear tree AEBS is configured to run WPA2 encrypted network, as well as a WPA2 guest network. I am attempting to yoke a BROTHER HL5370DW wireless B or G/ ethernet / usb-capable printer to the main network such that any and all units can print wirelessly or its equivalent (i.e., via printer hooked to AEBS through USB hub)
Problem: Despite configuring the Brother printer to recognize the main WPA2 network I created, I am unable to get wireless printing to work. My workaround was to physically connect Brother printer to AEBS via USB, specifically using a Belkin USB hub (after all, I wanted access to usb drives, as well as the printer). This workaround works ONLY SOME OF THE TIME. Generally, after a fresh boot of any computer or after a restart of the AEBS, any given computer will be able to print (i.e., any computer wirelessly connected to the main WPA2 network recognizes the printer). HOWEVER, at random times, printer access is gone (as is access to USB drives connected to AEBS's usb hub). Wireless networks are still up and running when that happens. IS THERE A WAY TO GET THE USB HUB's devices (i.e., printer and usb drives) to ALWAYS REMAIN AVAILABLE AS LONG AS THEY STAY CONNECTED TO THE AEBS? In other words, what accounts for the intermittent loss of the usb peripherals?
Sometimes, I just shut the airport off on whatever computer is having this problem, and the problem goes away. Sometimes, the problem is present across all computers in the house, sometimes only a few are affected. I can ALWAYS see the AEBS in the Airport Utility if the AEBS is connected to the particular computer via ETHERNET CABLE.
My theories:
- true wireless printing (i.e., without usb hub workaround) doesn't work because the N network somehow isn't backwards compatible with the Brother printer, which, i believe, is B/G. Although...isn't Wireless N networking supposed to work with BG devices? I did find a thread (https://discussions.apple.com/thread/2570774?start=0&tstart=0 ) that explains some of the particulars of WPA2 encryption and Wireless B/G issues, but it was beyond my level of comprehension (I'm a psychologist, but not an Apple Genius
- The usb workaround is only intermittently viable because of some flaw in the Airport or Airport Utility that causes dropouts to happen when a Macbook Pro or Air's lid gets closed or one gets opened after having been at a different network (e.g., at my office).
QUESTIONS:
- Should I try to use my old router (7 year old Linksys WRT54G) as an access point and connect the Brother printer to that G-router? How do I do that?
- I wouldn't mind just relying on the usb hub method if I could just insure more consistency (i.e., no random dropouts of peripherals). How could I do this?
Rule out:
- wireless printing works on my printer - it was being recognized back before the AEBS. I had the Linksys router running a WEP network and had the wireless printer talking with no cables to the router and the computers. (I just don't want to revert to using WEP encryption given its lack of security and my trying to protect HiPAA related health information on behalf of patients)
Any help will be greatly appreciated.
Thanks in advance!

13 ASCII characters = 104 (aka 128)-bit WEP
encryption
If turning off WEP works, then you just need to
provide the cameras with the "Equivalent Network Password".
One of the problems with WEP is that the actual
standard relies on a 10 character HEX key for 40bit
WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain
algorithms to convert simple alphanumeric passwords
(or passphrases) into HEX keys, thus enabling the use
of simple easy to remember WEP password rather than
lengthy HEX keys. The problem is that different
vendors use different algorithms to generate the HEX
key and therefore a ASCII password on an AEBS will be
hashed differently on a non-Apple client and vice
versa.
You may find the following article helpful:
- Apple article, especially the part about
"Third-party client to Airport".
Brilliant idea about trying the system with No encryption on... that DID solve the problem... almost.. once I turned off the encryption option, and restarted the Airport, I got a dialog box showing that the "Base station needs attention" but it didn't indicate WHAT kind of "assistance" it needed. Nonetheless, I closed out of the Airport program only to find that the indicator light, which had been Green, was now, flashing Yellow and I could not connect anything, including my computer. I opened the Airport program again and found the ONLY way I could get the Green light on was to select some sort of encryption option... then the light would go Green again but my cameras would not hook up again, and when I went back in and ONLY changed the option to NO encryption, I got the yellow flashing light and the "this base unit needs attention" warning...
I think your suggestions are almost on the mark... is there any way of reconciling the WEP coding between the cameras and the Airport??? Or turning off the encryption option and STILL have Airport work?
Thanks again for your help and suggestions... I really appreciate it.
geoff

Why does my Airport Extreme Base Station keep appearing as a Shared device?

Similar Messages

Maybe you are looking for