Why does my AirPort Extreme Base Station lose the internet when I unplug my printer Ethernet cable?

I just changed ISPs to Qwest from Speakeasy. New modem. Now my etherneted (from extreme base station) printer (Brother HL1870N) doesn't work.
And if I unplug the printer ethernet cable from the base station, the base station loses the internet connection.
Any help would be appreciated.
thanks

whats the version on your airport extreme and what renerations is it?

Similar Messages

Why does my Airport Extreme Base Station keep appearing as a Shared device?

After installing 10.5 my Airport Extreme Base Station keeps appearing with a Windows PC icon under the SHARED list in the Finder, and I don't have a hard drive attached. Does anyone know why it's appearing, and how I can make it go away?

Even more weird in my case, I have the Airport Extreme show up twice under Shared. One shows an icon of the actual Airport Extreme which is the one that has the hard drive attached and that works fine. The second is named Airport-Extreme and has an icon like its a PC. lol Not sure what's going on here but if you ask me the first one should be there because that makes sense, but I have no idea why the second one is displayed. Must be some sort of bug.

Why does my Airport Extreme Base Station not recognize my iProDrive powered external hard drive?

My 500GB iprodrive is recognized when connected directly to any of my computers just fine. My AEBS recognizes flash drives just fine. But the two together don't work. I have tried reformatting to exfat, msdos(fat), extended, extended journaled, none work. Its a powered drive so I'm assuming thats not the problem. Help?

Its a powered drive so I'm assuming thats not the problem.
I have to use a powered USB hub with a 1 TB LaCie hard drive when I connect it to the AirPort Extreme, otherwise the drive is not recognized.
However, I can connect the same hard drive directly to my MacBook Pro and it works just fine without the powered USB hub.
Try formatting the drive in Mac OS Extended (Journaled), also known as HFS+, and try using a powered USB hub when you connect the drive to the AEBS.
If that still won't work, then you have to assume that the drive is just not compatible with the USB port on the AEBS.

Can I use an Airport Extreme Base Station from the USA in Europe ?

A friend of mine gave me an Airport Extreme Base Station from the USA to Germany. When I hook it up to my PB by ethernet cable the Computer can't find the Base Station at all. If I use my Sonnett Aria Extreme PCI card it finds the station but in the pop-up menu asking in which country I want to use the airport station it only offers North and South American countries. How do I go from here and why is my PB not finding the station when I'm using cables ? Has it something to do with different models for different countries ? Any idea ? Thanx

Here you go ...
Changing the Radio Channel on the AEBSn
Either connect to the AEBSn's wireless network, or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Setup, check these settings:
AirPort - Wireless
o Channel: <Use Automatic or select a preferred channel>

Can I use two airport extreme base station on the same network

Can I use two airport extreme base station on the same network

Here is my network setup:
D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
attached via ethernet to
5th generation AirPort Extreme Base Station - Main (Bought last week)
attached via ethernet to
4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
The main AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
TCP/IP Tab -> Configure IPv4: Using DHCP
DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
The remote AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1 (Everything else under this tab is blank)
Hope this helps with info needed.

HT201210 why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?

why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?

no into my labtop i have internet but for some reason when i plug my iphone into it it saids update servers could not connect to the internet please check to make sure u have internet and i do.

Airport extreme base station is turning off when computer sleeps

I had Brighthouse upgrade my modem to their "Lightning" package. They installed a new modem. I had to make some config changes to block their wireless router and continue to use my airport extreme. Everything is working but when my computer goes to sleep or is off, I can't get on the internet with my laptop or I-phone.

I had Brighthouse upgrade my modem to their "Lightning" package. They installed a new modem. I had to make some config changes to block their wireless router and continue to use my airport extreme. Everything is working but when my computer goes to sleep or is off, I can't get on the internet with my laptop or I-phone.

Why does my airport extreme have 2 of the LAN port on but not the main light after a lightning strike ??!

pleasee help!!

Unfortunately, this is a symptom that a power surge has damaged the AirPort Extreme. There is likely nothing that can be done other than replacing the device.
If you have an Apple store or authorized servicer in your area, you should take it to them so they can have a look at the device to confirm. As user stinkybumbler mentions, it would be a good idea to have any of your sensitive electronic gear plugged into a high quality surge protection device.

Airport Extreme Base Station as bridge for Westell DSL router

I have searched the forums & internet and for the life of me cannot get my network to work properly! I hope you can help.
Here is the situation (I rent so chances are we will not be moving hardware anywhere):
- Westell (Verizon) DSL wireless router downstairs connected to the internet, 1 iMac via ethernet, and 2 ibooks via Airport cards
- One lonely Powermac G4 upstairs that does not have a wireless card
- One extra Airport Extreme Base Station with firmware version 5.7 installed & connected via ethernet/LAN to the G4
I figured the "easy" thing to do would be to use the AEBS as a wireless bridge to get the G4 online. The network utility has occasionally thought that the G4 was connected to the internet, but the internet didn't work at all when it said that!
I have been configuring the AEBS using my wireless ibook (G3). I "unchecked" distribute IP addresses, and "checked" connect to network via WDS. I used the Westell's MAC address as the main WDS source. Under the "WDS" tab, I said to configure the AEBS as a remote station and the Westell router as the main station, and to allow wireless users to connect.
I have tried using the same Network name for each. WEP/WAP is NOT set up on either modem, so passwords aren't a problem. They are both set to channel 6. I am configuring the TCP/IP settings manually.
When the network names are the same, the internet either stops working, or the computers can't find the AEBS.
I don't understand why the AEBS seems unable to see the DSL network.

Hi,
Well, what I have been able to do is this:
I have a Westell Wireless DSL router, just like the one mentioned here, and just like the one mentioned in the article I made reference to, the one started by Mr. Müller.
As was mentioned in the Mr. Müller article, there are some possibilities that will work. They were submitted by a guy named Duane, from Texas. He gives three alternate possibilities, which he entitled "Solution #1, Solution #2, and Solution #3. He says all three of these alternatives will work, and in reading them over I came to the following conclusions: First, he really knows his stuff, and second, his proposed solutions would probably work.
Based on his comments I decided to take a risk yesterday - I put my older Mac Base Station in a drawer and invested in a new Airport Extreme.
Anyway, I digress...
What I've done is follow Solution #3. And it works! I now have a connection from my laptop to the Airport Extreme base station and the internet. I am typing this message using that connection. All I had to do was disable the wireless connection of the DSL router (using their software, of course), and connect the Airport Extreme, via the LAN Ethernet connector, to the Westel DSL router.
Now, all that remains for me is to extend the range of the base station, using an Airport Express. I haven't had any success with that yet, but I see no reason why I shouldn't get it to work eventually. If you can help me out with that, though, I'd sure appreciate it.
Best regards,
Patrick
Macintosh G5, Powerbook G4 Mac OS X (10.4.7)

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Define static IP for both LAN and W-LAN devices with an Airport Extreme Base Station

Hey guys,
I have a lot of different devices connected to my Airport Extreme Base Station (5th Gen) either wirelessly or via ethernet cable. Since I control some of them via VNC and currently have to find the corresponding IP-addresses through trial-and-error, I'd like to define static IP-addresses for the computers in question. My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor. Two of the devices I want to remote-access are wired to a D-Link DES-1005D switch, which in turn is connected to the 1st ethernet port of the Airport Base Station. The remaining 3 remote clients are connected over 802.11n. All computers run Windows.
My problem now is that even though I was able to define static IP-addresses employing the "DHCP only" router mode, this didn't seem to work for the two computers connected via ethernet. Not only did I lose any internet connectivity with those, I even lost the ability to remote-connect to them using the VNC-viewer.
The question now is: how do I specify static IP-addresses for my ethernet devices correctly?
I hope you can help me.

My network consists of a cable modem connected to a TP-Link WR1043ND router in the basement, from which an ethernet cable leads to the WAN-port of the aforementioned Airport Extreme Base Station on the 2nd floor.
If you read the information in the other post, my answer would be the same here.
The Router Mode of DHCP Only is rarely used, and would only really be appropriate if your ISP was providing you with a fixed bank of multiple fixed or static IP addresses to use. This does not appear to be the case in your post.
If this were the case, the first IP address would be used as a Static IP address for your connection, and other devices on your network would receive the other fixed IP addresses.
99%+ of the time, you would use the Router Mode setting of DHCP and NAT on a network when you want the AirPort to perform as the main router for the network.
But......your post also indicates that you have another router upstream on your network from the AirPort Extreme. You would not want to run two routers in series on a network. That explains the problems that you are having.
The AirPort Extreme needs to be configured in Bridge Mode. It cannot be the "main" router on your network when you already have another router on the network. That is a fundamental networking rule.

Windows XP lost connection to airport extreme base station

I had a perfect connection after setting up my Airport Extreme with my Mac Book Pro and my HP laptop and one HP desktop then when trying repair media center. I did install the airport utility in XP but when trying to scan it cannot pick up my base station. It worked perfect before now I am at a hold and I don't know what direction to take.
Some questions.
How do I find the IP address on my Airport?
Do I need to create a new wireless network since the airport utility does not pick up the base station?
When I search available networks on the PC why doesn't mine show up?
Can someone point out the steps to take to get this crappy PC back on the internet, oh by the way it's my wife's and now she's on mine and I need to get her back on hers ASAP!
Thanks I appreciate your time to help out!

>How do I find the IP address on my Airport?
The default LAN-side IP address of the AirPort/Time Capsule is: 10.0.1.1.
>Do I need to create a new wireless network since the airport utility does not pick up the base station?
You shouldn't have to. Assuming that the base station is still providing a wireless network, you should be able to access it with the AirPort Utility. To do so, run the utility, and then, select File > Configure Other ... from the utility's menu bar. Enter 10.0.1.1 in the Address window and the Base Station Password in the Password window. If you did not change the Base Station Passwork, the default is "public."
If you are still unable to access the base station via the utility, then try temporarily connecting an Ethernet cable between the computer and the base station ... and then, try accessing it again.

Airport Extreme base station vs. Linksys router

Hi all -- I have a tech choice to make and I'm soliciting advice and war stories from those who have been in my place.
I have a DSL connection, G5 Mac and a Windows laptop. I've been connecting to the Internet via a Linksys WRT54G router -- the Mac is connected to the router via Ethernet, and the Windows machine connects wirelessly -- and I've been happy with this setup. I have it on good authority that I'll be getting an Airport Express in my stocking this year; I had done a little research and found that it is possible to make the WRT54G and the Airport Express work together, and was planning on doing some hacking and fiddling to make that happen in the new year.
However, last night my WRT54G seems to have died a horrible death -- all its lights started blinking at once, the Internet connection went away, then all the lights went out except for the "diagnostic" light, and now no lights come on at all. No idea what happened, but it seems pretty kaput.
So! I'm in need of a new wireless base station. I could get an Airport Extreme base station, or I could get another Linksys (or another off-the-shelf 802.11 router, but we'll just use "Linksys" as the catch-all phrase here to mean "not an Airport Extreme base station"). The most obvious difference is price -- the Airport Extreme station is $200, while the Linksys is more like $65. Another thing that irks me about the AE station is that it only has one LAN port. I do like being able to plug in my laptop to the wired network to do some diagnostics once in a while and it'd be a pain to have to disconnect my Mac to do so. And then there's nagging worries that the AE base station might not work as well with my Windows laptop.
On the other hand, I'm sure that setting up the Airport Express would be much, much easier with the AE base station. And I do like the idea of the base station being able to dial up if my DSL goes down (as it does from time to time). Basically, I am tempted by the AE base station feature-wise, but I'm kind of balking at paying three times the price and not getting even a second LAN port. Any advice, particularly from people who have used both types of routers in a mixed network, would be appreciated.

Replace your Linksys with another WRT54G. Then you can hook up your anticipated AX as either a client (connected like a computer), a wireless access point (connected using ethernet with DHCP disabled on the AX), or using WDS:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=607414

Airport Utility 5.4.2 was unable to find Airport Extreme base station.

I downloaded the new Airport Utility 5.4.2 to my 2009 24" iMac with Snow Leopard. Now it is unable to find my Airport Extreme base station or Airport Express. My iMac is connected to the network via the Airport Extreme base station but the Airport Utility cannot find it. All I get is this message "Airport Utility was unable to find any Apply wireless devices. Make sure the Apple wireless device you want to set up is plugged in and in range of your computer and then click rescan to try again". I clicked rescan numerous time with no luck. I even downloaded the Airport Utility 5.4.2 again with no luck. What is wrong??? Everything was working fine until I downloaded the Airport Utility 5.4.2.

Thanks for the info.
Following your same steps exactly, I am able to save the configuration file to the desktop, or navigate to another folder to save it at that location.
I was able to do this previously with 10.5.x and with current Snow Leopard. Notice that you list 10.4.x as your operating system. If you are still running this OS, it could be that 10.4.x does not allow this feature with 5.4.2?
Not sure if downloading another copy of 5.4.2 would be worth the pain, as I'm inclined to believe that it probably would not help solve your issue. If you decide to do this, please post back with your results.

Setting Up Comcast to Work with the AirPort Extreme Base Station

I just set up Comcast high-speed internet through the cable modem and ethernet connection and it works fine. What I need is a step by step instruction on how to set up the connection through my AEBS. I've tried to configure using the Admin Utility, the AirPort Set-Up Assistant, the Network panel---all with no success. I'm not sure what to enter in the boxes or what to check. I've read the "Designing AirPort Networks" PDF and it wasn't much help.
The AirPort Network was working fine with the dial-up connection I had before.

Voila! NOT!!!
I'm having the same problem trying to set up a friend's "new" Macs, and I cannot get them connected to the internet. I've also followed the same steps. I tried the resetting trick (unpluging, waiting, repluging the modem first, then the Airport Extreme Base Station.)
The DSL ISP is SBCGlobal. Their dsl modem is SpeedStream 5100. The AirportEBS is the about 4 year old white base station with the phone jack, and a WAN and a LAN ethernet ports. I'm trying to connect two iBooks and a MacMini.
Everything did fine for the past year with the modem in "regular" mode and only ONE Mac connected. When the new Macs were recently acquired, SBC techs said that the modem needed to be put into PPPoE mode so that multiple Macs could be connected at the same time. This was done. [The techs said in regular moden the modem does the authentication; in PPPoE mode the modem acts as a bridge and the AirportEBS is the router and provides the authentication. I am assuming the techs are coreect, but I don't know for sure.] The CAT5 ethernet cable from the modem goes into the WAN port on the AEBS. The computers all see the local wireless network set up by the AEBS.
However, when any of the Macs try to connect to the internet, the error message returns "No PPPoE server available." Resetting the modem and base station has not cured this. [n.b. Bypassing the AEBS completely by connecting the CAT5 cable from the modem directly to the Mac will provide internet connection.] Any other ideas? Sounds like both of us are having the same sort of problem.

Why does my AirPort Extreme Base Station lose the internet when I unplug my printer Ethernet cable?

Similar Messages

Maybe you are looking for