Why does my app always ask for access to Contacts?

I have written an app in AppleScript, that tries to access Contacts.  Every time I run the app, I get a dialog asking me to allow access.  In Settings / Security & Privacy / Privacy, my app is listed as one of the apps that is allowed to access Contacts, and the box is checked.  I'm stumped.  Thanks for any suggestions!

I'm with you on this. Hopefully, someone will help us with this.

Similar Messages

  • Why does the app store ask for my payment details to be confirmed when i am trying to install a free app (facebook for iphone)

    why does the app store ask for my payment details to be confirmed when i am trying to install a free app (facebook for iphone)

    Just select no credit card click below
    http://support.apple.com/kb/ht2534

  • Why does Intel version always ask for my password when adding loops?

    When I add loops to the PPC version, it never asks for my password. I want this behavior on the Intel version. Always asking for my password’s really annoying. Thanks very much. Peace.

    Being able to to access, install and change anything on your computer with a simple keystroke is just not a good thing security wise. Maybe you don't download from unknown sources, use a wifi network, use public or work networks, IM, let others use your computer or let OS and software get out of date. But people reading this may not be in your situation. Most password hacking tools will start with single keystrokes and no password will gain access in a fraction of a second.

  • Apps always asking for access (N8)

    I recently had to factory reset my N8 to get rid of the phone lock bug caused by me inadvertently enabling MfE (the one where you can't turn off lock code even though MfE has been disabled).
    But after restoring everything, I'm getting very annoying behaviour from some apps and widgets. For example AccuWeather will ask for access to phone data and for user data as well as the usual "Allow connection to network" prompt. Also Maps will ask to select an access point but fails to remember it even in the same session so will ask again 10 minutes later.
    Some things are ok, like the email widgets that update without problem.
    I read somewhere that it might be to do with certificates and signing but I haven't a clue how to resolve it. I've tried uninstalling and re-installing AccuWeather and have installed an updated version of Maps since the problem started but there's been no change in behaviour.
    Any ideas?

    The Maps problem might be an access point issue but the AccuWeather is something else because it's asking for permission to access user data and also to access phone data which I know are related to security capabilities which would have been set when the apps were signed.
    It's not only AccuWeather that has this problem, I get it with some other apps too (e.g. AutoTrader) but not all. It might be to do with the type of technology the app was developed with (i.e. Qt, QML, WebKit etc), but you can't tell so easily.

  • Why does the App Store asks for wrong password

    Hi,
    I'm travelling a lot between the U.S. and Europe, which causes that I have 2 Apple IDs.
    So there are some apps I purchased with my US-Apple-ID, and some apps I purchased with my second apple ID.
    If I wanted to update my apps from both accounts it first asked my for the password of my 1st Apple ID, then the one of my second.
    This worked fine the past two years.
    Now it only asks me for one of them, but still wants to update all of my apps. Finally it says that this app has not been purchased before, but I can purchase it know by tapping "ok". (or something like this). I already bought it. why does it ask for the wrong password of the wrong apple id, I didn't purchase it with?
    Here are the steps I already tried:
    1. restarting my device
    2. Sign off and sign back in with my ID I purchased it with. -> Then tapping "Update All" OR just "Update" at a specific app stills asks me for the password of the wrong ID. (I did this with the appstore app and the settings app->AppStore)
    3. sign in with the ID I purchased it with, then search for the specific app and hit "update" (where it usually says "buy", or "free" if not installed yet). It still asks me for the wrong apple id.
    4. I'm not syncing my apps with iTunes anymore, just music and my photos. I don't want to sync my apps because I would have to reinstall all my apps again and loose all of it's data.
    5. I still can buy new apps with both accounts and then it's still asking for the right ID, I want to purchase it with (the one I'm currently signed in).
    6. Deleting the app, then sign in with the right ID, search for the ID and redownload the new version worked, but in this case all my app data is lost.
    7. In App Purchases are NOT working, it asks for the right password, but then it's says that I have to buy the app again. ?!?
    Do you have any idea, why this happend or why I'm unable to update my own apps?

    There is a 15-minute window. After 15 minutes of inactivity, you will again be prompted for the password next time you try to purchase/download something.

  • Why does my iPad constantly ask for a keychain security access code?

    Why does my iPad constantly ask for a keychain security access code?

    You might have some app updates or other itmes that are trying to download.

  • Why doesn't Photoshop touch ask for access to local photos on my iPad so I can grant access and edit?

    Why doesn't Photoshop touch ask for access to local photos on my iPad so I can grant access and edit?

    That's odd. Does this mean that you want to have the request or that you can't see the photos even though you enabled it over the privacy/photos?
    If you enable it - it's not necessary to get the request. If you want the request the safest way to get it back is to reset the privacy settings by going to iPad settings/General/Reset/Reset Location & Privacy
    thanks,
    Ignacio

  • Why does mac os keep asking for keychain password

    why does mac os keep asking for keychain password

    I'm getting this same problem. It seems random when it asks for the password, maybe every 3 or 4 days it'll ask when I plug it in at night. I've tried restoring from an older backup, which has not resolved the issue.

  • I downloaded Adobe Flash 7 times.... why does my system keep asking for it?

    I downloaded Adobe Flash 7 times.... why does my system keep asking for it?

    Read Before Posting: How To Get A Useful Answer To Your Question

  • Why does my G5 not ask for my pswd when mounting a .dmg when my iBook does?

    i have an app on a disk that i am trying to put on my iMac G5. it opens but does not ask for my password. when i click the installer it goes through a couple stages but then says "there is nothing to open". so, i take this disk and put it in my iBook, it opens and i get the prompt asking for my password, i type it in, click the installer and the app installs no problem. i've opened apps from a disk before on my iMac with no problems. i get the same error response if i use the diskmounter or disk utility. if anyone has any ideas i'd be almost next to eternally grateful.
    cheers.

    To backup your data. So that if you get a new iPhone or your iPhone gets stolen or something like that, all your data will always be safe.

  • Why Does Logic Pro Repeatedly Asks for Serial # and XSKey When Started?

    I've purchased and installed an upgrade to Logic Studio 9. I previously used Logic Pro 7 but did not have it installed on my MacBook Pro when I installed Logic Studio 9.
    The installer asked for the Logic Studio 9 serial number which I entered and then prompted for the original serial or XSKey. I dug out the Logic 7 XSKey, plugged it in and it was accepted so I could continue with the installation which completed successfully.
    So far so good.
    But now Logic Pro 9 asks for the serial number and XSKey every time I run Logic which isn't what I expect. I re-enter the new serial number and then plug in the XSKey which is accepted and the software runs as expected, but I would prefer not to have to do this every time I start the application, in particular because I don't want to carry the XSKey around with me at all times.
    Why isn't Logic 9 storing my serial number? Why does it ask for the serial # and XSKey every time I start the application?
    I'm not running Logic as an admin user. Could this be preventing Logic from storing the serial information?
    Any help would be greatly appreciated.

    I had this when upgrading from 7 to 8. What I did was plugin the xskey BEFORE I started the upgrade and it never asked for a key or serial again after that.

  • Why does my itouch constantly ask for my Apple ID password after updating to OS 5.1 even when I just leave it alone?

    Ever since I updated to OS 5.1 my itouch has been asking me for my Apple ID password roughly about 6 times a day when I just leave it alone, like I'm not even downloading anything for it to even ask for my password so what is the deal? I've already tried doing a hard reset, still the same. And no I have not done a factory restore that's just a last step I'll ever do, it's just annoying to be constantly asked for my password.

    You might have some app updates or other itmes that are trying to download.

  • Why does the App store ask if I want to create three security questions when, in fact, I am required to create three security questions to use the App store?

    This is sooooo lame. I'm given the choice of "Not Now" when asked if I want to create three security questions, but clicking "not now" logs me out rather than letting me download the app I came for. Is this sort of poor design typical for Apple?

    Then why doesn't Apple simply say:
    "To download the app you must first create three security questions and answers. Do you wish to create the questions now so that you may then download the app?"
    As written, the text implies that I could download the app without creating the questions first. Good design calls for a clear and direct statement that an act is mandatory when it is mandatory.
    Best
    Jim

  • Why does my iPad keep asking for my iCloud password?

    My iPad gas started asking for my iCloud password all the time since downloading 12 days of Christmas app which included 2 free downloads of  a song And a video these didn't download correctly and are not stuck in limbo can't get them to finish downloading or delete them and  i am frustrated about having to constantly enter my iCloud password I have entered it 15 times while typing this 16 now!!! Help

    Some people just solved the problem by deleting the account from the device for a moment "Settings > iCloud > Delete Account" and then added it back again.

  • Why does 7.0.1 ask for previously saved passwords on last version?

    I installed version 7.0.1 on a pc and I get asked to put in previously saved passwords (on last version)...is this right or am I getting hacked by an imitation Mozilla?

    Hi Edgardo,
    Thanks for your help !!
    Yes, I know it is only I label file. I guess I was too anxious and wasn´t clear, sorry.
    I mean the SM installation is asking for a label  DB2/UDB::RDBMS:DB2/UDB:.
    Which means any version of DB2/UDB , ok ?
    What I was saying is that I only have DB2 LUW medias. Exaclty the version DB2/LUW:V9, which is "DB2 v9.1.0.356".
    What I dont understand is why doesn´t SM 7.0 cannot accept a higher version, as it is asking for DB2/UDB....
    Otherwise I will have to download an older version of DB2, what I wouldn´t like to do, ok ?
    Thanks a lot !
    Enio.

Maybe you are looking for

  • External Tables & Non English Characters

    Hi I am new to external tables, i wanted to know what i need to do to upload the data which is of non-English characters, Example i need to upload the data where the single file will have data for more than one non-english characters. 1. English 2. C

  • Newbie: Is the CMS output HTML or Java applets?

    Hi! I am looking for what software to buy: Microsoft or Oracle. In that regard, I see that Java is the development language. Does this mean that the web-interface for clients is based on Java applets, or does the Java-application just generate HTML-c

  • NetStream.Play.InsufficientBW when streaming server side playlist

    Hi I am streaming pre recorded audio files (mp4) to an AIR client. I have tried two different solutions, streaming the file directly with the NetStream.play("mp4:xxxxx.m4a") and creating a server side playlist, adding the same sound clip and then str

  • BO XI 3.1 Cluster Installation - 1 Web Tier + 2 Application Servers + 1 DB

    Hi Guys, This is the first time I am doing a Cluster installation of BO XI 3.1. Here's the scenario : 1. We have Server-1 as - Web-Tier 2. Server 2 + Server 3 - Cluster Installation. 3. SQL DB Server. The step 3 above is done. Now my confusion is wha

  • Designing an interactive form

    I want to show fields to gather name, address, date of hire, and so on, and to make the form more attractive and less cluttered, I want each text field to show a label in the field, rather than an external label preceding the field, such as ("Name,"