Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Similar Messages

Why does my digital AV adapter not work with my iPad

Why does my digital AV adapter not work with my iPad

i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

Camera Connection Kit Not Working with Canon Rebel

Using the connection and the Canon Rebel SRLD, I was not able to transfer pictures to the iPad.
I was able to transfer pictures using the memory card.
Not able to transfer pictures from the 3G iPhone.
Should I take the connection kit, the camera, and the iPad to an Apple store to see why it's not working, or does anyone have any solutions.
Thanks,

The cameras connection kit does not support the iPhone 3G.
http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc0Njk4NzU#ov erview
It does however supports both the iPhone 3GS and 4.

Camera connection kit not working with ipad2

I have had no problems using my camera connection kit, and have downloaded plenty of pics and films, but it now seems that since I have updated to recent IOS it now no longer works and just comes up with the 'this accessory is not supported by ipad' message.
Anyone got any ideas? I have tried several SD cards and several cameras, so it is a problem with the ipad itself by the looks of it. I have tried a soft reset, turned on/off etc.
Many thanks in advance.

I have a 5 in 1 (not Apple) connection kit and like most others was pulling what little hair I have out trying to use the SD card reader on my IPAD 3 (probably the same with the Ipad 2), it simply does not work since the recent software upgrades. However I have just discovered that my camera USB connection lead DOES work when connected to the USB socket of the 5 in 1 connector. You will need to move the little black switch on the connector to the USB position. Once connected it shows an import icon which then allows scroilling through every photo on the camera. I can now import selective or all photos and it saves spending out £25 plus on an 'official' connector. Hope this helps.

Camera Connection Kit not working with Canon G12

Hi there,
I was wondering if anyone can help me...
I just purchased the iPad Camera Connection Kit and when I plugged both the SD card and USB connectors in with the appropriate divices connected, and turned on, neither worked. Absolutely nothing happens.
My iPad picks up the CCK in the 'about' section in Settings but the Photo App did not load when the connectors where in. I am thinking it has something to do with my camera/SD card
Information:
iPad - Generation 1, Version 5.1.1, 16GB
Camera - Canon G12 Power Shoot. It has Picture Transfer Protocol
SD card - SanDisk SDHC card 4GB
Also, the camera saves the photo files in the DCIM folder with 8 characters, e.g. IMG_1234
Any help would be greatly appreaciated.
Many thanks,
CJ

I cannot find these settings anywhere on my camera or in the manual.
I had to do some searching on the internet just to find out it had picture transfer protocol. I am struggling to find answers about the G12's PTP or Mass Storage.
Sorry...

Camera Connect Kit not working with iOS 4.2 software update

Since updating my iPad software to iOS 4.2 when I try to use my Camera Connect Kit I receive a message saying "Cannot Use Device: the connected USB deivce requires too much power"
Can any body help me find a way to fix this problem, or even tell me how i can downgrade to the previous software on my iPad as I am sure this is what is causing the problem as my CCK worked fine before I upgraded.
Thanks,
Amber-Rose

One article that might be helpful is here (suggesting you need HUB if it's drawing too much power):
http://support.apple.com/kb/HT4106
@ rotorcraft:
It has to have a DCIM folder, but the directory after the DCIM folder, and the files themselves, have to follow DCF rules (http://en.wikipedia.org/wiki/Designrule_for_Camera_Filesystem)..if it's the structure created by the camera it should be fine but if you change the folder to something other than DSC_xxxx and you change the image filename to something other than ABCD1234.whatever then it won't show up.
You can double check if the kit is being recognized at all in Settings -> About, then scroll to the bottom, it should say like Apple Card reader or something I forget. If it isn't, I would just reboot

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why AirPrint is not working on my ipad4 after updating to IOS 8.1?

WWhy AirPrint is still not working on my ipad4 after updating to IOS 8.1

Hello mmpreston,
Thanks for using Apple Support Communities.
To troubleshoot issues with AirPrint on your iPad please follow the directions outlined below.
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
About AirPrint
Take care,
Alex H.

Why did my camera connection kit stop working after updating to iOS 6.0.1?

Camera connection kit stopped working on ios6.01 updated phone. Same camera kit works on the iPhone that I did not update. Why does it not work with 6.0.1?

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

HT4101 Why does my lightning sd card reader connection kit not work on my iPad mini since I upgraded to ios7.

Why is my lightning sd card reader not working on my iPad mini since I updated to ios7. It worked perfectly well before upgrade.

Try rebooting your iPad: Press and hold BOTH the power and home buttons at the SAME time for about 10 seconds until the Apple Logo appears, then let go of both buttons and your iPad will restart.
Is the lightning kit you use an Apple kit or aftermarket? If it is Apple and after rebooting it does not work, return it to an pple Store and they will replace it.

Why will my IPAD camera connection kit not work?

My IPAD camera connection kit won't work! Help! Tried to reboot and had no luck!

What model iPad?
Strange that neithere works. Are you sure the kit is securely plugged into the iPad?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

Camera connection kit not working on ipad2 iOS 5.1

Hi all,
I have two iPad 2 at home. I bought the camera connection kit few days ago and I'm experiencing some issues on one iPad only. Everything is working fine with the one that has iOS 5.0.1 installed on it. I can copy both, videos and images. But, the other one has iOS 5.1 and the app Photos does'nt read the SD card at all. The thing is that I'm able to that the iPad is recognizing the card reader under Settings/General/About.
Any ideas what might be wrong? Any other people is experiencing same problem?
Thanks,

I haven't had an issue. Do you use the same card on both devices and it works differently on each one?
You might try resetting the one that isn't working. Hold down the sleep and home key, past the red power down slider and until you see the silver apple. Let it reboot and see if it works.
Might, might not help it, but it's a common fix for glitches.

Ipad 2 IOS 7 Camera Connection Kit Not Working

I have Ipad 2 and Apple Camera Connection Kit. Since update to IOS 7 it has not worked. I have tried everything suggested on the boards but it still does not work.

I'm surprised this worked at all. I gather the camera connection kit was intended as input only.
1) You could try the app...
"Dukto is a simple application that allows you to share files between devices connected to the same (wireless) LAN network."
http://www.tidal.it/?page_id=309&lang=en
http://www.msec.it/blog/?page_id=11
works on my iPhone 4 running ios 7.1.2
There are other of these apps around that work on devices not supported by AirDrop.
2) You can downgrade to ios 8.2.
For a limited time Apple will allow you to downgrade to the previous release. Hurry do not wait.
See brownox second post here:
https://discussions.apple.com/thread/6545455
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/
see what versions are allowed:
http://api.ineal.me/tss/status
see the post by arizonacat and others in this thread.
https://discussions.apple.com/thread/5337442?tstart=0
arizonacat points out these sites:
Provides easy access to Apple firmware files.
http://www.ipswdownloader.com/
How to install the ios software. The install will erase your exiting data. Backup your existing data.
http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

Ipad camera connect kit not working

When I attach my iPod camea connect kit (the Appel one, not 3rd party) to my iPad 3, I get the message that the accessory is not supported. What gives? I pop in an SD card and it doesn't read anything. All I get is the not supported message a few times.

I have the new iPad also, white 64GIG 4G and my camera connection kit is not working either. The same camera connection kit purchased at my local Apple store worked fine with my iPad 2. I've tried everything (e.g. power-off, reset, restore, putting photos on the card then connecting, and reformatting the card using disk utility) and it even shows the camera connection kit under "general" "about" it just doesnt work as far as being recognized in the photo app. I guess this is where AppleCare phone support comes in handy. I hope this gets fixed because I've been shooting a lot of video and creating some pretty good home movies with my kids using iMovie. I would really like to get these large files transferred onto my Mac. The SD card I'm using is a PNY Professional SDHC 4GIG Class 10 just to provide all the variables I'm working with. What am I missing?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Similar Messages

Maybe you are looking for