Why does my cell phone say printer not supported
I am trying to print from my android phone and my cell phone says printer not supported.
I have a HP 5510 photosmart printer
Hi maddymel39;
I hope you are doing well
what cell phone do you have?
What version of the Operating system is in the phone?
What application are you using to print? provide this information and I will do my best to help you.
Regards;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!
Similar Messages
-
Why do I keep getting default printer not supported?
I have had my printer for aprox.three years without a problem, now I get default printer not supported and printer not activated error code 30
Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
Why does my new phone say "no service"?
My new phone says "no service". What do I need to do?
Hi
Sounds like you have no connection to the network.
Have you called your airtime provider to activate your nano-Sim?
Hope this helps -
Why does the apple iPad 1st gen not support Adobe flash player
No camera icon
Flash is not supported on any iOS device, and as Adobe have stopped development on all mobile versions of it, it probably never will be : http://www.apple.com/hotnews/thoughts-on-flash/
In terms of the camera icon, the original iPad doesn't have any cameras on it, so there is no need for a camera app. -
Trying to access my Facetime and I haven't in a while. It is not allowing me to sign in. I am conneected to my Wi-Fi and am sitting right on top of it and it still says i need to check my network connection. My internet connection is fine and works with everything else but Facetime. What's up with that??
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>General>Date&Time and make sure it is set to Automatic
- Go to Settings>wifi>the connected network and change the DNS to Google's 8.8.8.8
- Go to Settings>iTunes and App Stores and sign out and sign back in -
I have no restrictions on phone. I tried to be safe and use security features like... Safe search,cookie block and such. However it keeps saying unable to download file type when I try and install any of the up to date browsers. This is interesting to say the least. Because my browser is already using the most up to date version. I have internet explorer using a windows 8 nokia
hello, the mobile version of firefox isn't available on the windows phone platform: [https://support.mozilla.org/en-US/kb/will-firefox-work-my-mobile-device#w_other-operating-systems|Will Firefox work on my mobile device?]
there have been technical and legal hurdles in the app store originally which discouraged mozilla from starting any developments in this direction. i don't know about the current situation, but since mozilla is now focusing its energies on creating firefox os as open source web-based platform, i doubt that you will see firefox on your windows phone device in the foreseeable future... -
My cell phone say sim not valid
my sim is not valid what i have to do
See this thread that was just started a few minutes before this one and the search feature here in the forums is a very handle too as well:
https://discussions.apple.com/thread/5995546?tstart=0 -
Why does the GeForce GTX 560 Ti NOT support OpenCL?
From the Nvidia web site it says that the GeForce GTX 560 Ti supports: DirectX 11 > 3D Vision > PhysX > CUDA > SLI >
301.24 drivers have been used and have downgraded to 296.10 to see if that would help, but it didn't.
When I check the performance tab under Advanced it shows that the OpenCL option is grayed out. When I check the Sys info log it also shows that OpenCL is Not availible (included below).
Why is this and when will it be fixed? Now that CS6 is shipping it should be working.
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3411 MHz
Built-in memory: 16351 MB
Free memory: 12614 MB
Memory available to Photoshop: 14726 MB
Memory used by Photoshop: 95 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560 Ti/PCIe/SSE2
Display: 2
Display Bounds:= top: -1080, left: 0, bottom: 0, right: 1920
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560 Ti
OpenCL Unavailable
Driver Version: 8.17.12.9610
Driver Date: 20120229000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560 Ti
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384Bandalier1 wrote:
Problem solved. NVidia just released their first 300 series drivers and the Open CL option is working now…
Good for you! I was just about to start typing a reply to the OP clarifying that support for OpenGL depends on the driver for the card, when I read your last post.. -
Why does calender in OSX 10.9 not support add attachments any more
In the latest update 10.9 I do not have the option to add atachements [documents] to my Calender item. In iCloud is this still posible. Any solution?
I suppose you could try temporarily removing:
From /Home/Library/Preferences/
com.apple.iCal.plist
com.apple.CalendarAgent.plist
From /Home/Library/Containers/
com.apple.iCal
com.apple.CalendarAgent
The two just above are folders (caches.)
Put the above on your Desktop or in the Trash (but don't Empty).
Do one at a time to see if it fixes the problem. I'm afraid if not, then the only other solution I can offer is to reinstall Mavericks. -
My phone says SIM not valid after ios 5 update, Why and how do I fix it?
Why does my iPhone 4 say SIM not valid after I updated to ios 5? Also, is there anything I can do to fix it?
Sounds like your phone was software unlocked, or hacked/jailbroken, to work with any carrier. Updating the phone restored the original carrier lock. All you can do now is contact the carrier it is locked to and see if they have an unlocking policy.
Good luck. -
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards. -
why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
It couldn't be much easier than that as you don't actually have to do anything more than normal.
This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
USB syncing is far faster than Bluetooth. -
Why does my apple TV say it needs hdcp compatibility. It never said that before. Now my apple tv is not working.
Hello Rickpoulette,
The following article provides further information and could very well help get your Apple TV and your television cooperating again.
If HDCP authentication does not succeed, you may see one of the following symptoms:
A message may appear on your television stating "This content requires HDCP for playback. HDCP isn't supported by your HDMI connection."
You may see periodic bands of static, or full screen static, flashing across your TV screen.
If you are experiencing either of the symptoms above, try playing the same content again for at least another 10 seconds. If the issue persists, try the following steps until the issue is resolved:
Connect your Apple TV (2nd generation) directly to your HDTV using an HDMI cable.
Set your Apple TV and HDTV to off or sleep mode
From the Apple TV interface, select: Settings -> Sleep Now.
Turn off your TV and wait for about 10 seconds.
Turn your TV back on.
Press the Select button on your Apple TV remote to wake your Apple TV.
Some HDTVs may need a firmware update. Consult your TV manufacturer's user manual or online support pages for additional information about how to update your TV's firmware.
If available, try using a different HDMI to HDMI cable, such as an Apple HDMI to HDMI cable, directly between your Apple TV (2nd generation) and 720p HDCP-compatible HDTV.
Apple TV (2nd generation): About Apple TV and HDCP
http://support.apple.com/kb/HT4428
Cheers,
Allen -
when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?
- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button? -
Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...
Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.
Maybe you are looking for
-
Transport in Bi 7.0 Error in Transformation .
Hi All, While Tranportainig Transformation in BI7.0 I am getting following error <b>Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode) No rule exists</b> Start of the after-import method RS_TRFN_AFTER_IMPO
-
My Ipad2 has recently lost the appointments on my calendar for the past 3 months. I need that content to refer back to. Wheredid it go and can I get it back?
-
Hi I am developing a site with Dreamweaver CS3. My problem is that I need to define certain words in the site which when clicked, open a seperate browser window that shows the definition of the word. The new window that opens contains all the definit
-
Incorrect shipping item from Singapore
Hi there, I live in Philippines. I have received two iMac that books from Apple Store Online, However, the order webpage show specifications has Apple Magic Mouse, and the Shipment Notification mail is Apple Mouse, finally, I received the Apple Mouse
-
Where is Role store in Access Manager ?
Hello, How i get Role of User from Access Manager . In Access Manager if i create Role = "Sale Role" and assign User to this Role. Whare is "Sale Role" store in LDAP tree ?