Why does my CF port work but not my SD

I have been fudging with my machine for days trying to figure this out. the CF port works great when I put a card in it but if I put a card into my SD slot and click on the drive in explorer it says 'please insert a disk in drive E:'. I have done all the latest updates and cannot figure this out. Could I have a dead SD port? Any ideas would be great.

the card reader will show as two removable drives, one for the CF reader and one for the SD/MS/MMC reader
if you only have one removeable drive listed, then try unplugging the connector from the mobo and reconnecting that usually does the trick

Similar Messages

Why does book show on phone but not ipad?

Why would a book appear in iBooks on my iPhone, but not in iBooks on my iPad?
I Have the file saved in an email. When I try to open it on my iPad it shows iBooks as an option. However, when I choose it, iBooks opens, but the book never appears.
ANy tips? Idead?

Try iCloud or hooking it up with pic/Mac etc.
also try going to iTunes app on iPad and search it.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

Hi,
This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

HT1552 Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

Im setting up a server with the port 25565 and im doing it with Port Map but the problwem is i cant seem to get it to work with my router. it goes through my macmini to the router and the expansion hardrive

HT204053 Why does my apple id work on my phone and not my ipad?

Why does my apple id work on my phone and not my ipad?

Try resetting the iPad and try again > iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting

I can't load pictures to online site... Iphoto works but not aperture. I have edited photos that i exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

I can't load pictures to online site... IPhoto works but not aperture3. I have edited photos that I exported to an external drive but they will still not load to Walgreens for printing. Does anyone know what I can do?

Are you shooting RAW? Are you exporting masters or versions? Is there a size limitation on the Walgreens site?

Why can I sync a movie but not TV shows on my nano (7th gen)?

I am using iTunes 11.0 and can sync a movie (Miracle on 34th Street) to my new ipod nano 7th gen but when I try a TV Show (a Planet Earth HD episode) or even a brief video clip taken with my camara I am told that such an action is not permitted on this ipod. So why can I sync a movie but not TV shows on my nano (7th gen)? Thank you.

Before you can sync video files, it must be converted into a format compatible with ipod. If you can’t sync a video convert it by doing the following:
In iTunes, select the video you want to convert. Do one of the following then sync again after:
1) Choose File > Create New Version > Create iPod or iPhone Version.
2) Choose File > Create New Version > Create iPad or Apple TV Version.
I hope this works.

Does the ethernet port work when the using airport express in client mode?

I am considering using an airport express to extend my existing wireless network to a room where I can't get a cable to.
I will need to connect a at least 3 devices to the airport express.
The questions are:
- is an airport express the right answer to this problem?
- if so, does the ethernet port work (AE on client mode) as a passthru into the main network?
- can I plug a hub to it?
Thanks
RFSF

Hi Tesserax,
Really appreciate you taking time to respond.
I stopped by the Apple store this weekend and one of their sales people ( not one of their genius bar people) told me NO to all questions. I tend to believe more answers from people in this forum but just realize that I have not mentioned one possibly important point:
the main AP to which I will be connecting the airport express is not an Airport Extreme/Express AP.
Thanks,
Ricardo.

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink?

Question
why does firefox (updated) on windows 7 NOT send a hotllink (must copy/paste),when using the 'send link' feature,whereas firefox on XP always sends a hotlink? This feature has always worked perfectly on all my windows XP computers,but not at all on any of my versions of firefox on windows 7.How can i fix this? Why does it not work?

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]. You can also attach a screenshot on this page below '''Post a Reply''' > '''Add images: Browse ...'''

Why does my apple password work on EVERYTHING apart from home sharing where is gives an error code 5599!

why does my apple password work on EVERYTHING apart from home sharing where is gives an error code 5599!

Every time I try to set up icloud i get a message that my account is not verified and I will get an email about how to verify it. I never get the email. I have reset my password 4 times. My email address is good. My apple id works everywhere it should. For some reason my ipad will find my ipad but not my iphone, and my iphone will find my ipad. I cant change the setting on my iphone so the ipad can find it, because it is greyed out because icloud will not verify my email and password, and never sends me the email to verify it. Am I the only one with this problem?

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products?

Why does everyone at my work loose their internet connection when I update Adobe Cloud Products? We are on a 20mb broadband connection and there is around 20 people using computers at my work but when I start my Adobe Cloud Product update or when I try and download my Adobe Cloud Product everyone at my work looses their internet connection and so do I. But the update keeps downloading and installing.

I am sorry FooWingLi but the difficulties you are describing sounds more like a local network configuration issue. I would recommend working with your I.T. department to investigate this matter.

I have home sharing on but can't see my library on the computers icon. iTunes does display my purchased tunes but not my own imports.

I have home sharing on in iTunes but can't see my library when I use the computers icon on Apple TV. iTunes does display my purchased tunes but not my own imports.
I can play my own tunes by selecting them on my iMAC and directing them to Apple TV. I think that I should be able to see my entire library on Apple TV shouldn't I?
Am up-to-date with iTunes and using Mavericks OS. I am connecting to Apple TV with an Airport Extreme 802.11n Wi-FI and a brand new Apple TV.
Thanks for any comments,
Roger

Okay, so HomeSharing is not working. Most likely due to a network issue.
Is the ATV and computer running iTunes actually on the same network? Many new routers create seperate networks for the wired and wireless portions of the local network.

Why does my CF port work but not my SD

Similar Messages

Maybe you are looking for