Why does my computer keep trying to connect to a bluetooth audio device that doesn't exist?

For some reason, whenever I have my bluetooth on to use my Magic Mouse, every six minutes or so I get an error saying that my bluetooth is having issues connecting to a bluetooth audio device. I do have a Bluetooth Audio device, but it stays at home and is only on when I am watching movies. This happens all the time, even when I am at work, and even when I tell it to stop using the device.
My kernel.log reads the following:
     kernel[0]: IOAudioStream[0xffffff8015766a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (1,450)->(2,654).
     kernel[0]: IOAudioStream[0xffffff8015766a00]::clipIfNecessary() - adjusting clipped position to (2,450)
Does anyone know what is going on?

Make sure the device isn't selected in the Sound preference pane.

Similar Messages

  • Why does my computer keep trying to go to another server?

    My macbook switched to another network when I close it. Why does it do this? I have not experienced this before. I have my own network server and each time I clost my macbook it goes to another server; to be exact it is optimum. I don't have that service at all.
    Please help. I feel like something fishy is going on.....

    What model is your Mac? Go to Apple > About This Mac > More Info.
    It should either say something like "Early 2010 iMac" or "MacBook 5,2"

  • Why does my computer keep opening netbios connections?

    netbiosd keeps opening connections to random IP addresses (usually an overseas ISP). Since installing LittleSnitch I've blocked 5 of these connections (2 ISP's in the US, 1 ISP in Poland, 1 ISP in the UK), and am starting to become concerned that I might have some kind of malware.
    I intalled ClamXav and checked the whole harddrive with the latest definition, but it didn't come up with anything.
    Any ideas?

    Using LittleSnitch I have received 3 alerts from netbiosd in the past week.
    I have denied all of them after a cursory lookup of the IP addresses using various tools (whois, traceroute)
    The blocked entries were:
    69.70.43.102, port 137
    82.186.105.146, port 47863
    125.239.135.130, port 53659
    Any idea why netbiosd is trying to contact these IP addresses? I would assume this is along the same lines. I'm getting to the point where I am willing to disable/block netbiosd to keep these messages from coming up, but I don't want to risk undue wear and tear by not sleeping.
    I do have screen sharing enabled, but am always behind a firewall. <---don't know if this is related. File and print sharing are not enabled.
    Lion 10.7.4, fully updated. MBP/i7 2.6/8GB

  • TS1398 Why does my ipad keep saying poor connection on FaceTime ever since ios6

    Why does my ipad keep saying poor connection on FaceTime since we went on ios6

    I have the same problem with my ipad 2.. ever since i updated to ios 6 it says "connecting" and never connects..and then 5  mins later it says "connection lost" CALL BACK! its so frustrating as i have not had any issue before the update..
    both me and the end caller have updated to ios 6, so im afraid the above response doesnt work for me! Some one please help, as its driving me nuts to not able to facetime!

  • Why does my computer keep disconnecting from my wifi?

    Why does my computer keep disconnecting from my wifi?

    Some users with various Wi-Fi problems have reported that they were given the following instructions by Apple Support, sometimes with success. After completing the procedure, you'll have to recreate all your settings in the Networkpreference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password. Reboot and recreate the network settings.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller.
    Step 3
    Reset the PRAM.

  • HT1420 Why does my computer keep asking to be authorized when i put my iphone on the charger?

    Why does my computer keep asking to be authorized when i put my iphone on the charger?

    Authorization and Deauthorization
    See iTunes Store- About authorization and deauthorization for Macs.
    See How to Authorize or Deauthorize iTunes | PCWorld for Windows.
    In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
    More On De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

  • My computer was trying to connect to my Bluetooth mouse but I accidentally hit cancel so now my computer won't connect to my mouse. I turned my computer off. When I turned it back on it still won't connect and I can't login! Help!

    NEED URGENT HELP!
    My computer was trying to connect to my Bluetooth mouse but I accidentally hit cancel so now my computer won't connect to my mouse. I turned my computer off. When I turned it back on it still won't connect and I can't login! Help!

    Reset the SMC.
    Barry

  • Why does my computer keep telling me to update my flash player?

    My computer keeps having a pop up that tells me to install a new flash player? I have installed the latest Adobe Flash Player for Windows 7. Why does it keep giving me this message. It hinders my school sites when trying to access them!!

    Your computer doesn't tell you any such thing; it must be a website that tells you so.
    What is your installed Flash Player version?  See http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_the_Flash_ Player_version_installed_on_your_machine

  • Why does my phone keep trying to re-start and how do i resolve this issue? Without a system restore as I have not backed it up.

    It happened about 20 minutes ago. It keeps on coming up with the revolving circle which it does when it shuts down from loss of battery but then keeps trying to re-start itself by displaying the apple icon. Help please.

    Hello AshleyJacobs1,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Best of luck,
    Mario

  • Why does Outlook 2010/2013 tries to connect by rpc over http in LAN?

    Hi All,
    I have Exchange 2010 (Two CAS) Published by TMG (Basic Authentication). Also outlook anywhere is configured with Basic Authentication.
    Some users have issues with "authentication prompt" (randomly). By the way, Outlook Clients(2007/2010/2013) are fully updated.
    What I can see when "authentication prompt" shows up, Outlook tries to connect by rpc over https.
    Is this a normal behavior?
    Regards
    Jo

    Hi,
    Firstly, I'd like to say, basic authentication requires user name and password. Thus, it's an expected behavior that credential will prompt once when users login Outlook with basic authentication.
    Additionally, I'd like to confirm how you confirm it's Outlook Anywhere when the credential prompts. Based on my knowledge, the credential issue may be caused by connectivity issue and we can confirm the connection method through the tool "connection status".
    Thus, I'd like to confirm if the connection is established when the credential issue happens.
    Press ctrl and right click Outlook icon>connection status>status, protocol
    Thanks,
    Angela Shi
    TechNet Community Support

  • Why does my Firefox keep saying "not connecting"?

    Hi,
    I have Firefox for my Windows Vista (I believe the version is 20. I don't know precisely and don't know how to find it) and have had problems since last night. After I was up and running smoothly for about ten minutes, there was a message in the upper left hand corner of Firefox that said "not connecting" (or something along those lines). In the past, this would happen and I'd click "CTRL/ALT/DELETE" to close it out, reopen and everything would run fine. Now when I use those three keys, the computer eventually freezes. I contacted Geek Squad for assistance and the lady there claimed you all have had problems in the past couple weeks. Maybe I finally caught up with those problems (as this just happened last night and it's been happening all today)? Anyways, I'd like this resolved quickly. On my first call to Geek Squad, he advised me first to check for Windows updates and install them (there was one recommended to install and three optional ones. When I clicked to install the recommended one, it again froze with the "not connecting" message or whatever it says). Let me know how I can proceed on this issue. Thank you.

    Hello,
    Please update to the latest version of Firefox by going to getfirefox.com and then if that doesn't help, please try safe mode as outlined below:
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Why does my ipod keep disconnecting and connecting every half a second?

    I had my iPod touch (4th gen, ios6) synced to a desktop and when I tried connecting it to my new laptop to sync it keeps connecting then disconnecting every half a second (flashing on and off) and will not connect at all. Do I need to do something with my old computer? I don't think it's something wrong with the cord because it connects to the wall just fine.

    Different conductors/contacts are used for charging and dats. Thus, it still could be a bad cable.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reboot the computer
    - Try another USB port and cable
    - Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Try on another computer to help determine if iPod or computer problem
    - If it works with other computer that indicates a problem with your computer. Try
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem with all compouters, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Why does my Mac keep trying to install EXCEL?

    I am trying to use the XM Radio site(using Firefox), but I am being told that I need to download a plugin. I link on the Plug In & it is WIndows Media Player. So I go to the site via the link, and download the version for the Mac OS X. But when I try to install, it wants to install Excel!
    And this is not the first item of software that has tried to do that. I do not now recall just which program I was trying to install but it also tried to install Excel.
    I Dont Want Excel! I want to listen to my XM radio player.
    What's the deal with Excel forcing itslef onto my computer!

    Thank You! THANK YOU! thank you.
    I installed Flip4Mac & it works just fine now.
    I can't tell you why Excel is
    being so assertive, but I suggest, as does Microsoft,
    that you use the Flip4Mac plugin
    for Quicktime for your Media Player needs. MS has
    abandoned Media Player on the Mac!

  • Why does my Computer keep crashing

    Ok...New to this whole video editing deal. Thought it would be a cool thing to get Adobe Premiere 7.0 and use it to create some video movies of the family to post on facebook or whereever. Not there at all. I want to know if someone can give me a clue as to why my system automatically restarts when I open or try to open the Premiere program. I have an HP Pavilian with a Pentium D 3.00ghz processor w/ 1.5 GB of RAM.
    I installed the software fine and restarted the computer after the installation. The Norton Anti Virus was disabled. I click the icon to open the program and it runs for about 30 seconds and then BAM, my computer shuts down and restarts automatically.
    My guess is the program is too large and when my system runs out of memory it quits and goes to sleep hence the restart. But if that is not it, can somebody help my work around this issue. Do I need more RAM? A larger processor? A new computer? Not sure of what the next step is here. I have been reading some post and people talk about this other program that is a rival to PE called Vegas. I am interested but I am not sure at this point if I will have the same issues. What do you think? I am really interested to know.....

    Brownrod,
    No, though Task Manager will tell you what is going on at the moment. It is good for monitoring the Processes and Performance of the computer, in real time.
    In C:\Windows\System32\ you will find Event Viewer (eventvwr.exe, in XP-Pro). It is a logging application, that keeps tabs on the system, and logs all events, whether they are errors, or not. It is a tabbed viewer, and the two most important tabs are System and Applications. I can't recall what one needs to do to access it from within Windows, because when I get a new computer, one of the first things that I do is place a shortcut to it on my Desktop. Then, I can access it with just a Dbl-click. I do the same for Control Panel.
    Each time that you bootup, start/end a program, and shut down, it logs events. Most of these events will have a little "bubble" icon with an "i" in it. The ones that you want to study will be yellow triangles with a "!," and red circles with an "X." You'll get messages like this:
    "Hanging application Photoshop.exe, version 9.0.2.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
    In that case, you also have a link to MS's Knowledgebase. Those can usually provide some clue, as to what went wrong, though not always. Still, they are better than nothing. Unfortunately, some of the messages are so cryptic that even a senior coder for MS cannot tell you what happened. However, you might get lucky and find some good, useful info.
    Then, there is always "The Case of the Unexplained,"
    http://www.microsoft.com/emea/spotlight/sessionh.aspx?videoid=722
    Good luck,
    Hunt

  • Why does System Preferences keep trying to launch?

    Hi all,
    Every now and then System Preferences starts to bounce in the doc (even when I have done nothing to launch it). It then fails to load and stops bouncing.
    After this if I try to launch it myself from the doc it does nothing. If I launch it from the apple menu it does laod and a second System Preferences app appears in the doc.
    It's all very strange - anyone know why it might be doing this?
    Cheers
    James

    No, I don't know why it's doing it, but my first instinct would be to remove the bouncy icon from the dock, open sys prefs from the Apple menu and right click on the new dock icon, choose options>keep in dock.
    And see if that cures it or not.

Maybe you are looking for