Why does my cq-62 laptop gives me warnings about High CPU usage?

I have a CQ61-420US Notebook with Nortons 360 installed. Recently I have been getting a warning pop-up from Nortons saying, I have High CPU usage. When I check the box I am taken to a Norton System performance page that indicates 90% CPU usage. Can anyone help?

Right click on the taskbar empty space and select "Start Task Manager", you can leave it running and minimize it, it will give you an animated graph in the taskbar you can watch.
Depending on what your are doing on the PC, this may or may not be a problem.
If you are not doing much on the PC when it uses 90% then there could be a problem.

Similar Messages

Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

Why does my safari browser frequently gives me a gray screen? I resetted my safari many times and it doesn't help. Also sometimes when I scroll it gives me this weird scrolling effect where everything is either upside or messed up.

This article is for startup but it might help. http://support.apple.com/kb/ts2570

Why does apple 4s maps not give me voice directions

Why does apple 4s maps not give me voice directions

What happens when you select the option for directions followed by selecting Start to proceed with the requested directions?

Why does my iPhone no longer give me the option to connect to my tv via Apple TV when on Safari as it previously did following my latest software upgrade?

Why does my iPhone no longer give me the option to connect to my tv via Apple TV when on Safari as it previously did following my latest software upgrade?

Thanks for your help, much appreciated.
Same phone, same tv, same broadband network so everything the same so I assumed that it would.....just work!!! :-)
I'm away this weekend but I'm going to turn off and reload the Apple TV to see if that might work.
If not I may be begging your assistance again next week!!!
Have a great weekend.

Why does my iPod keep on crashing when I run high memory apps?

Why does my iPod keep on crashing when I run high memory apps? I have a 32 gb 4th gen iPod Touch with only 11gb used, and I currently run 6.1.5 Everytime I run a high memory app, without fail it crashes. These apps include but are not limited to instagram, infinity blade, subway surfer, gmail, clear vision 3, dropbox, and even Safari has crashed on multiple occasions. I tried resetting the settings and that seemed to work for about a day but now I'm back at square one.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why does SCHDNEGACTION scheduler job have high CPU usage?

Hi,
In my embeded device(double CPU 1.5 G HZ ) SCHDNEGACTION scheduler job has 90% CPU usage. Why does the scheduler job have so high CPU usage? What is the job doing for?

Hi,
This job is not created by the scheduler. You will have to find out what component creates the job and what exactly it does to figure out why it is using high cpu and what would be the effects of disabling it (which would prevent it from running).
Hope this helps,
Ravi.

Why when i play fast H264 LLLL i got an high cpu comsume?

hi
i have noticed that with some containers , when i play fast a video LLLL in short i use the jog shuttle controls i got an high cpu consume %70 or even %80
for example this mp4 video
Codec: H264 - MPEG-4 AVC (part 10) (avc1)
Resolution: 1280x688
Frame rate: 23.976023
audio Codec: MPEG AAC Audio (mp4a)
with others containers i have such issue
thanks
i'm running cc under w8.1 pro

I have searched all over the web too to find any solutions regarding the unavoidable problem of Macs with Adobe's Flash Player. There are little improvements of reducing the high CPU during Flash use on a Mac through changing your main browser to Opera, Camino ... BUT it is still a problem which cannot be solved for now. The following URL is from Adobe's Bug Website and explains exactly what is wrong with Flash on a Mac:
Very High CPU usage and thus High Fan speed.
https://bugs.adobe.com/jira/browse/FP-890
Here's another link to a similar problem in the Apple Discussions:
http://discussions.apple.com/thread.jspa?messageID=8920577
And finally the comparison of CPU usage between Mac and Windows which shows very clear that there's obviously something MAJOR not working and Adobe has to fix it!
http://arstechnica.com/software/news/2008/10/benchmarking-flash-player-10.ars
It is a shame that this problem is out for years and Adobe is NOT trying to fix it, or at least not as intense as they should. So this is the reason why many people all over the world have to live with their Mac running high fan and a hot CPU when just browsing the internet.

Why does the highlight feature seem not to work about 1/2 the time in various ibooks. I'm trying to take notes and about 50 pages into a book the highlight feature stopped working.

I've long noted that the highlight feature in ibooks is clunky and fairly limited in it's note-taking features, but the last two books I've read I've had trouble getting the highlight feature to work at all. I click and drag over text and nothing happens. I try with command depressed and nothing happens. If I double click a bunch it will eventually highlight one word, but nothing more. What gives?
Also, not to be snarky, but why can't I seem to find a button that would read text to speach for me? How do blind people use this service, or illiterate, or dyslexic, or people like myself who can learn far more from hearing then from reading.
And why does the text of a book often render so that it's haf cut off of the page?

There is a button for speech within the iBooks menu. Edit > Speech. You might be better off buying Audiobooks. You can get them from the iTunes Store or Audible.com

High CPU usage when laptop is idle!

Hi,
After upgrade CPU usage is 20-30 % when laptop is idle.This happens for the first time,i use arch for about 2 months.
WM: Openbox.Here is what "top" gives me:
[dejan@DejanArch ~]$ top
top - 01:52:33 up 20 min, 0 users, load average: 0.13, 0.14, 0.13
Tasks: 123 total, 2 running, 120 sleeping, 0 stopped, 1 zombie
Cpu(s): 7.6%us, 16.7%sy, 0.0%ni, 75.0%id, 0.5%wa, 0.0%hi, 0.2%si, 0.0%st
Mem: 1019104k total, 587564k used, 431540k free, 37668k buffers
Swap: 2048280k total, 0k used, 2048280k free, 350592k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3531 root 20 0 71724 18m 8392 S 32 1.9 6:44.09 X
3827 dejan 20 0 79728 5040 3992 S 7 0.5 1:10.07 conky
3687 dejan 20 0 3432 1572 856 S 2 0.2 0:18.94 dbus-daemon
22165 dejan 20 0 88800 9820 7172 S 1 1.0 0:00.57 lxterminal
3704 dejan 20 0 90312 8456 6220 S 0 0.8 0:03.44 xfce4-power-man
3787 dejan 20 0 14124 2852 2364 S 0 0.3 0:02.81 obex-data-serve
22208 dejan 20 0 2556 984 756 R 0 0.1 0:00.06 top
1 root 20 0 1872 552 484 S 0 0.1 0:00.78 init
2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0 0.0 0:00.22 ksoftirqd/0
6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0
8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1
10 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1
12 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1
13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset
Thanks.
Last edited by grobar87 (2011-05-16 23:54:52)

@AliWam Thanks!Conky was the problem.When i kill conky CPU load drops.Strange :S But i want conky on my desktop,i hope there is solution for this.
@lagagon When i kill conky cpu load is normal (0 - 2 %),with conky 20-30% when laptop is idle.This is my "lspci":
[dejan@DejanArch ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
0c:00.0 Network controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
[dejan@DejanArch ~]$
So i think my video card is Intel and i use the lastest intel drivers.I install with this command "pacman -S xf86-video-intel".Please tell me if i do something wrong.
This is all i have in Xorg.0.log file:
[ 19.630]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 19.630] X Protocol Version 11, Revision 0
[ 19.630] Build Operating System: Linux 2.6.38-ARCH i686
[ 19.630] Current Operating System: Linux DejanArch 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 07:54:18 UTC 2011 i686
[ 19.630] Kernel command line: root=/dev/disk/by-uuid/9931bc08-6fa4-45f2-811c-1c7eb558b92d ro
[ 19.630] Build Date: 16 April 2011 12:05:35PM
[ 19.630]
[ 19.645] Current version of pixman: 0.20.2
[ 19.645] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.645] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.645] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 18 20:00:06 2011
[ 19.670] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.687] (==) No Layout section. Using the first Screen section.
[ 19.687] (==) No screen section available. Using defaults.
[ 19.687] (**) |-->Screen "Default Screen Section" (0)
[ 19.687] (**) | |-->Monitor "<default monitor>"
[ 19.688] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.688] (==) Automatically adding devices
[ 19.688] (==) Automatically enabling devices
[ 19.728] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.728] Entry deleted from font path.
[ 19.786] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 19.786] Entry deleted from font path.
[ 19.786] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 19.787] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 19.787] Entry deleted from font path.
[ 19.787] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 19.787] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 19.787] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.787] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.787] (II) Loader magic: 0x81f4ee0
[ 19.787] (II) Module ABI versions:
[ 19.787] X.Org ANSI C Emulation: 0.4
[ 19.787] X.Org Video Driver: 10.0
[ 19.787] X.Org XInput driver : 12.2
[ 19.787] X.Org Server Extension : 5.0
[ 19.788] (--) PCI:*(0:0:2:0) 8086:2a02:1028:029a rev 12, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000efe8/8
[ 19.788] (--) PCI: (0:0:2:1) 8086:2a03:1028:029a rev 12, Mem @ 0xf6f00000/1048576
[ 19.789] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.789] (II) LoadModule: "extmod"
[ 19.813] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.822] (II) Module extmod: vendor="X.Org Foundation"
[ 19.822] compiled for 1.10.1, module version = 1.0.0
[ 19.822] Module class: X.Org Server Extension
[ 19.822] ABI class: X.Org Server Extension, version 5.0
[ 19.822] (II) Loading extension MIT-SCREEN-SAVER
[ 19.822] (II) Loading extension XFree86-VidModeExtension
[ 19.822] (II) Loading extension XFree86-DGA
[ 19.822] (II) Loading extension DPMS
[ 19.822] (II) Loading extension XVideo
[ 19.822] (II) Loading extension XVideo-MotionCompensation
[ 19.822] (II) Loading extension X-Resource
[ 19.822] (II) LoadModule: "dbe"
[ 19.822] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.823] (II) Module dbe: vendor="X.Org Foundation"
[ 19.823] compiled for 1.10.1, module version = 1.0.0
[ 19.823] Module class: X.Org Server Extension
[ 19.823] ABI class: X.Org Server Extension, version 5.0
[ 19.823] (II) Loading extension DOUBLE-BUFFER
[ 19.823] (II) LoadModule: "glx"
[ 19.823] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19.842] (II) Module glx: vendor="X.Org Foundation"
[ 19.842] compiled for 1.10.1, module version = 1.0.0
[ 19.842] ABI class: X.Org Server Extension, version 5.0
[ 19.843] (==) AIGLX enabled
[ 19.843] (II) Loading extension GLX
[ 19.843] (II) LoadModule: "record"
[ 19.844] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.853] (II) Module record: vendor="X.Org Foundation"
[ 19.853] compiled for 1.10.1, module version = 1.13.0
[ 19.853] Module class: X.Org Server Extension
[ 19.853] ABI class: X.Org Server Extension, version 5.0
[ 19.853] (II) Loading extension RECORD
[ 19.853] (II) LoadModule: "dri"
[ 19.853] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19.876] (II) Module dri: vendor="X.Org Foundation"
[ 19.876] compiled for 1.10.1, module version = 1.0.0
[ 19.876] ABI class: X.Org Server Extension, version 5.0
[ 19.876] (II) Loading extension XFree86-DRI
[ 19.876] (II) LoadModule: "dri2"
[ 19.877] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.917] (II) Module dri2: vendor="X.Org Foundation"
[ 19.917] compiled for 1.10.1, module version = 1.2.0
[ 19.917] ABI class: X.Org Server Extension, version 5.0
[ 19.917] (II) Loading extension DRI2
[ 19.917] (==) Matched intel as autoconfigured driver 0
[ 19.917] (==) Matched vesa as autoconfigured driver 1
[ 19.917] (==) Matched fbdev as autoconfigured driver 2
[ 19.917] (==) Assigned the driver to the xf86ConfigLayout
[ 19.917] (II) LoadModule: "intel"
[ 19.917] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.940] (II) Module intel: vendor="X.Org Foundation"
[ 19.940] compiled for 1.10.0.902, module version = 2.15.0
[ 19.940] Module class: X.Org Video Driver
[ 19.940] ABI class: X.Org Video Driver, version 10.0
[ 19.940] (II) LoadModule: "vesa"
[ 19.941] (WW) Warning, couldn't open module vesa
[ 19.941] (II) UnloadModule: "vesa"
[ 19.941] (II) Unloading vesa
[ 19.941] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 19.941] (II) LoadModule: "fbdev"
[ 19.941] (WW) Warning, couldn't open module fbdev
[ 19.941] (II) UnloadModule: "fbdev"
[ 19.941] (II) Unloading fbdev
[ 19.941] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 19.941] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 19.942] (++) using VT number 7
[ 19.948] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.948] drmOpenDevice: node name is /dev/dri/card0
[ 19.949] drmOpenDevice: open result is 9, (OK)
[ 19.949] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 19.949] drmOpenDevice: node name is /dev/dri/card0
[ 19.949] drmOpenDevice: open result is 9, (OK)
[ 19.949] drmOpenByBusid: drmOpenMinor returns 9
[ 19.949] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 19.949] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.949] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19.949] (==) intel(0): RGB weight 888
[ 19.949] (==) intel(0): Default visual is TrueColor
[ 19.949] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 19.949] (--) intel(0): Chipset: "965GM"
[ 19.949] (**) intel(0): Relaxed fencing enabled
[ 19.949] (**) intel(0): Framebuffer tiled
[ 19.949] (**) intel(0): Pixmaps tiled
[ 19.949] (**) intel(0): 3D buffers tiled
[ 19.949] (**) intel(0): SwapBuffers wait enabled
[ 19.949] (==) intel(0): video overlay key set to 0x101fe
[ 19.957] (II) intel(0): Output LVDS1 has no monitor section
[ 19.976] (II) intel(0): Output VGA1 has no monitor section
[ 19.976] (II) intel(0): EDID for output LVDS1
[ 19.976] (II) intel(0): Manufacturer: AUO Model: 11ec Serial#: 0
[ 19.976] (II) intel(0): Year: 2008 Week: 1
[ 19.977] (II) intel(0): EDID Version: 1.3
[ 19.977] (II) intel(0): Digital Display Input
[ 19.977] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 19.977] (II) intel(0): Gamma: 2.20
[ 19.977] (II) intel(0): No DPMS capabilities specified
[ 19.977] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19.977] (II) intel(0): First detailed timing is preferred mode
[ 19.977] (II) intel(0): redX: 0.640 redY: 0.342 greenX: 0.310 greenY: 0.580
[ 19.977] (II) intel(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 19.977] (II) intel(0): Manufacturer's mask: 0
[ 19.977] (II) intel(0): Supported detailed timing:
[ 19.977] (II) intel(0): clock: 72.0 MHz Image Size: 344 x 193 mm
[ 19.977] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 19.977] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 19.977] (II) intel(0): Supported detailed timing:
[ 19.977] (II) intel(0): clock: 72.0 MHz Image Size: 344 x 193 mm
[ 19.977] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 19.977] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0
[ 19.977] (II) intel(0): M094G€B156XW1
[ 19.977] (II) intel(0): Unknown vendor-specific block 0
[ 19.977] (II) intel(0): EDID (in hex):
[ 19.977] (II) intel(0): 00ffffffffffff0006afec1100000000
[ 19.977] (II) intel(0): 01120103902213780ae6b5a3574f9426
[ 19.977] (II) intel(0): 1e505400000001010101010101010101
[ 19.977] (II) intel(0): 010101010101201c5678500026303020
[ 19.977] (II) intel(0): 340058c11000001a201c567850002630
[ 19.977] (II) intel(0): 3020340058c11000001a000000fe004d
[ 19.977] (II) intel(0): 30393447804231353658573100000000
[ 19.977] (II) intel(0): 00000000000000000001010a202000df
[ 19.977] (II) intel(0): EDID vendor "AUO", prod id 4588
[ 19.977] (II) intel(0): Printing DDC gathered Modelines:
[ 19.977] (II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1486 768 771 775 806 +hsync -vsync (48.5 kHz)
[ 19.977] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 19.977] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 19.977] (II) intel(0): Printing probed modes for output LVDS1
[ 19.977] (II) intel(0): Modeline "1366x768"x60.1 72.00 1366 1414 1446 1486 768 771 775 806 +hsync -vsync (48.5 kHz)
[ 19.977] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.977] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.977] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19.977] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.996] (II) intel(0): EDID for output VGA1
[ 19.996] (II) intel(0): Output LVDS1 connected
[ 19.996] (II) intel(0): Output VGA1 disconnected
[ 19.996] (II) intel(0): Using exact sizes for initial modes
[ 19.996] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 19.996] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.996] (II) intel(0): Kernel page flipping support detected, enabling
[ 19.996] (++) intel(0): DPI set to (96, 96)
[ 19.996] (II) Loading sub module "fb"
[ 19.996] (II) LoadModule: "fb"
[ 19.997] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 20.006] (II) Module fb: vendor="X.Org Foundation"
[ 20.006] compiled for 1.10.1, module version = 1.0.0
[ 20.006] ABI class: X.Org ANSI C Emulation, version 0.4
[ 20.006] (II) Loading sub module "dri2"
[ 20.006] (II) LoadModule: "dri2"
[ 20.007] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.007] (II) Module dri2: vendor="X.Org Foundation"
[ 20.007] compiled for 1.10.1, module version = 1.2.0
[ 20.007] ABI class: X.Org Server Extension, version 5.0
[ 20.007] (==) Depth 24 pixmap format is 32 bpp
[ 20.007] (II) intel(0): [DRI2] Setup complete
[ 20.007] (II) intel(0): [DRI2] DRI driver: i965
[ 20.007] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 20.041] (II) UXA(0): Driver registered support for the following operations:
[ 20.041] (II) solid
[ 20.041] (II) copy
[ 20.041] (II) composite (RENDER acceleration)
[ 20.041] (II) put_image
[ 20.041] (II) get_image
[ 20.041] (==) intel(0): Backing store disabled
[ 20.041] (==) intel(0): Silken mouse enabled
[ 20.042] (II) intel(0): Initializing HW Cursor
[ 20.063] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.063] (==) intel(0): DPMS enabled
[ 20.063] (==) intel(0): Intel XvMC decoder enabled
[ 20.063] (II) intel(0): Set up textured video
[ 20.063] (II) intel(0): Set up overlay video
[ 20.063] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 20.063] (II) intel(0): direct rendering: DRI2 Enabled
[ 20.063] (==) intel(0): hotplug detection: "enabled"
[ 20.064] (--) RandR disabled
[ 20.064] (II) Initializing built-in extension Generic Event Extension
[ 20.064] (II) Initializing built-in extension SHAPE
[ 20.064] (II) Initializing built-in extension MIT-SHM
[ 20.064] (II) Initializing built-in extension XInputExtension
[ 20.064] (II) Initializing built-in extension XTEST
[ 20.064] (II) Initializing built-in extension BIG-REQUESTS
[ 20.064] (II) Initializing built-in extension SYNC
[ 20.064] (II) Initializing built-in extension XKEYBOARD
[ 20.064] (II) Initializing built-in extension XC-MISC
[ 20.064] (II) Initializing built-in extension SECURITY
[ 20.064] (II) Initializing built-in extension XINERAMA
[ 20.064] (II) Initializing built-in extension XFIXES
[ 20.064] (II) Initializing built-in extension RENDER
[ 20.064] (II) Initializing built-in extension RANDR
[ 20.064] (II) Initializing built-in extension COMPOSITE
[ 20.064] (II) Initializing built-in extension DAMAGE
[ 20.210] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.210] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.210] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.210] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 20.210] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.210] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 20.210] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.211] (II) intel(0): Setting screen physical size to 361 x 203
[ 20.500] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 20.500] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 20.500] (II) LoadModule: "evdev"
[ 20.500] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.514] (II) Module evdev: vendor="X.Org Foundation"
[ 20.514] compiled for 1.10.0, module version = 2.6.0
[ 20.514] Module class: X.Org XInput Driver
[ 20.514] ABI class: X.Org XInput driver, version 12.2
[ 20.514] (II) Using input driver 'evdev' for 'Video Bus'
[ 20.514] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.514] (**) Video Bus: always reports core events
[ 20.514] (**) Video Bus: Device: "/dev/input/event7"
[ 20.530] (--) Video Bus: Found keys
[ 20.530] (II) Video Bus: Configuring as keyboard
[ 20.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input7/event7"
[ 20.530] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 20.530] (**) Option "xkb_rules" "evdev"
[ 20.530] (**) Option "xkb_model" "evdev"
[ 20.530] (**) Option "xkb_layout" "us"
[ 20.564] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 20.564] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 20.564] (II) Using input driver 'evdev' for 'Power Button'
[ 20.564] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.564] (**) Power Button: always reports core events
[ 20.564] (**) Power Button: Device: "/dev/input/event2"
[ 20.580] (--) Power Button: Found keys
[ 20.580] (II) Power Button: Configuring as keyboard
[ 20.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 20.580] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 20.580] (**) Option "xkb_rules" "evdev"
[ 20.580] (**) Option "xkb_model" "evdev"
[ 20.580] (**) Option "xkb_layout" "us"
[ 20.580] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 20.580] (II) No input driver/identifier specified (ignoring)
[ 20.581] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 20.581] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 20.581] (II) Using input driver 'evdev' for 'Sleep Button'
[ 20.581] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.581] (**) Sleep Button: always reports core events
[ 20.581] (**) Sleep Button: Device: "/dev/input/event3"
[ 20.596] (--) Sleep Button: Found keys
[ 20.596] (II) Sleep Button: Configuring as keyboard
[ 20.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 20.596] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 20.596] (**) Option "xkb_rules" "evdev"
[ 20.596] (**) Option "xkb_model" "evdev"
[ 20.596] (**) Option "xkb_layout" "us"
[ 20.600] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 20.600] (II) No input driver/identifier specified (ignoring)
[ 20.600] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event10)
[ 20.600] (II) No input driver/identifier specified (ignoring)
[ 20.601] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event11)
[ 20.601] (II) No input driver/identifier specified (ignoring)
[ 20.601] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 20.601] (II) No input driver/identifier specified (ignoring)
[ 20.607] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 20.607] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 20.607] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 20.607] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.607] (**) AT Translated Set 2 keyboard: always reports core events
[ 20.607] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 20.640] (--) AT Translated Set 2 keyboard: Found keys
[ 20.640] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 20.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 20.640] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 20.640] (**) Option "xkb_rules" "evdev"
[ 20.640] (**) Option "xkb_model" "evdev"
[ 20.640] (**) Option "xkb_layout" "us"
[ 20.641] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event4)
[ 20.641] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[ 20.641] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[ 20.641] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.641] (**) PS/2 Mouse: always reports core events
[ 20.641] (**) PS/2 Mouse: Device: "/dev/input/event4"
[ 20.660] (--) PS/2 Mouse: Found 3 mouse buttons
[ 20.660] (--) PS/2 Mouse: Found relative axes
[ 20.660] (--) PS/2 Mouse: Found x and y relative axes
[ 20.660] (II) PS/2 Mouse: Configuring as mouse
[ 20.660] (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
[ 20.660] (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 20.660] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 20.660] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
[ 20.660] (II) PS/2 Mouse: initialized for relative axes.
[ 20.660] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[ 20.660] (**) PS/2 Mouse: (accel) acceleration profile 0
[ 20.660] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[ 20.660] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[ 20.660] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[ 20.660] (II) No input driver/identifier specified (ignoring)
[ 20.661] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event5)
[ 20.661] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[ 20.661] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[ 20.661] (II) LoadModule: "synaptics"
[ 20.661] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.667] (II) Module synaptics: vendor="X.Org Foundation"
[ 20.667] compiled for 1.10.0, module version = 1.4.0
[ 20.667] Module class: X.Org XInput Driver
[ 20.667] ABI class: X.Org XInput driver, version 12.2
[ 20.667] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[ 20.667] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 20.667] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 20.667] (**) Option "Device" "/dev/input/event5"
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[ 20.793] (--) AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 16
[ 20.793] (**) Option "TapButton1" "0"
[ 20.793] (**) Option "TapButton2" "2"
[ 20.793] (**) Option "TapButton3" "3"
[ 20.900] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 20.900] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[ 20.953] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 20.953] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[ 20.953] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[ 20.986] (--) AlpsPS/2 ALPS GlidePoint: touchpad found
[ 20.987] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[ 20.987] (II) No input driver/identifier specified (ignoring)
[ 20.989] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event6)
[ 20.989] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 20.989] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 20.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 20.989] (**) Dell WMI hotkeys: always reports core events
[ 20.989] (**) Dell WMI hotkeys: Device: "/dev/input/event6"
[ 20.996] (--) Dell WMI hotkeys: Found keys
[ 20.996] (II) Dell WMI hotkeys: Configuring as keyboard
[ 20.996] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 20.996] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 20.996] (**) Option "xkb_rules" "evdev"
[ 20.996] (**) Option "xkb_model" "evdev"
[ 20.996] (**) Option "xkb_layout" "us"
Thanks for your patience and thanks for help

High CPU usage without any application running on the laptop

Hi ,
I saw some earlier posts as well but I am not sure if anything is helping me. I have a HP Pavilian Dv6. Its with me for now since 2009 or so. It was all running very well till last Nov - Dec 2013 timeframe. I had many bulky work done on the laptp like video cutting editing , along with audio edits , fairly well. I used it mostly for videos and no games though.
Since Nov - Dec 2014, all the videos started slowing down, extremely jerky, and not catching up with the audio. Slowly the problem became worse . After 10 mins of video it just stopped and hanged. It did it with every site and any format of video including videos on my C Drive. I earlier tried a lot of things, playing around with flash player thinking that's the culprit. Did not help. Browsers changed, Mozilla, internet explorer , Chrome, everything no change. Then till around last week, I tried tested, uninstalled a lot of programs, also did Microsoft system restore and seen , the CPU continously behaved reaching to its 100% peak and the videos getting shot down. Just no change. Last week , I got desperate and finally reformatted my hard drive and did a factory restore on the laptop. IT DID NOT HELP !! The laptop behaved really like a good puppy for a few days , Youtube and what not and again since yesterday it has been shot down ! No videos will run. What's more even a DVD video is not running , nothing on a browser a simple DVD player DVD play is not running. Jerky videos and hanging issues.
Everything boils dows to 100% CPU usage. Even if I am closing all my applications , it shows 'system' as the process using 90-100% CPU. Without any browser or even a notepad option open. There is also a prgram 'dwm' which eats up the next big slot of CPU.
I am really tired of this and not able to enjoy anything. Please suggest what could be the issue here and how can it be helped?

Just to add the laptop is HP Pavilian DV6 , model Dv6t - 1300.

My laptop (win7 2ghz, 1gig) has 100% cpu usage with itunes installed (even when not running itunes) since the upgrade. i had to uninstall. tried installing but still the same problem. my daughter wants the new ipad, but this is a serious problem.

when itunes upgraded my laptop went to 100% cpu usage. only solution was uninstall. have tried itunes again as my daughter wants the new ipad. still same problem tho so not keen to spend £400 on new pad without pc support. anyone help? (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Why does my ipod touch only give me sound and no video when connected to tv

whenever I connect my ipod touch to my flat screen to play a movies or watch a music video saved on the ipod touch ... I get the audio .... sometimes it will show the video but most times its does not ... simply put ... Why? and how do i fix?

cor-el,
Thank you for the help. I followed your instructions and it worked in Safe Mode. I went through my Add-ons and disabled them one at a time until I found the culprit.
Additional question: If I set up Sync and run it for my desktop and laptop, then turn my add-on back on, will it continue to interfere? Or only when it tries to re-sync? I'm asking because I love the add-on that causing the trouble and will have a hard time letting it go.
Thanks again for the help.
DB

Why does my HP DV6 laptop randomly shut down and stop charging?

I believe I've asked this question before. In August 2011 I got a laptop:
HP DV6
Product #:
LW260UA#ABD
Processor
AMD A8-3500M APU
My problem is that my laptop always has to sit in a certain position of it is going to be able to charge. Is this due to the port where the laptop is charging being faulty and loose? Also when I unplug the charger the laptop shuts off automatically within 1 minute. I then have to plug the laptop up to the charger again for it to work. Basically, I need to ALWAYS have my laptop plugged in for it to work. I tried doing the battery test on the laptop, but it said it's fine and has no bad cells. Any help would be very much appreciated.

Hi melkouas,
Thank you for your inquiry, I will try my best to help.
I grasp that you are experiencing a charge issue. You have tested the battery and it is OK, but you must be connected to power for it to work.
I have located documents I believe will help. Battery Does not Power Notebook or Hold a Charge
and Testing and Calibrating the Battery (Windows 7).
Please let me know if you would like further assistance.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Why does work done on laptop OX 10.6.4 change when transfer to Mac pro 10.8.2

I am building a website.. started on my laptop with OX 10.6.4 and everything works like it should, I have one images on the page and it says in the location that I put it .. I transfer the website to a Mac Pro OX 10.8.2 ...and the image in the websit move to a different location.. What can I do to stop this from happening. Since the laptop travels with me.

same kind of issue: Trying to link facebook "like" to the website .. Laptop I get a white square where the facebook "like" bit should go .. transfer to mac Pro ... nothing show up just the but the text give way for where the "like" should go. So, white square on laptop no white square on mac Pro. There is something going on here. mmm

Why does this ring operation occasionally give an error?

I am using LabWindows/CVI, and I created a low-level ring acquisition. It works normally at first, but if I stop it and start a few times (does not always happen on the first stop / start cycle), then I get the error:
NON-FATAL RUN-TIME ERROR: "Dalsa.c", line 2716, col 13, thread id 0x000012A4: Function imgSessionCopyBuffer: (return value == -1074397014 [0xbff600aa]).
The requested buffer has been overwritten and is no longer available. It occurs on the second line of the following code:
(2715) imgGetAttribute(Sid, IMG_ATTR_LAST_VALID_BUFFER, &currentRingBufNum);
(2716) imgSessionCopyBuffer(Sid, currentRingBufNum, (uInt8*)pixel_address, FALSE);
I stop my acquisition by :
imgSessionAbort(Sid, &ringBufNum);
Then I unlock my ring buffer, dispose each element, and finally dispose of the buffer list. The next acquisition starts by creating a buffer list, creating and allocating each element, locking the buffer list, and configuring the session to use that buffer list. I am NOT closing the session or the interface, I only do that upon quitting my program. Why do I get this error??
Buffer creation code:
//Create a buffer list
imgCreateBufList(NUMRINGBUFFERS, &Bid);
//Find out how big the buffers should be in memory
imgGetAttribute(Sid, IMG_ATTR_BYTESPERPIXEL, &bytesPerPixel);
bufSize = AcqWinWidth * AcqWinHeight * bytesPerPixel;
//Create the ring buffer
for (i = 0; i < NUMRINGBUFFERS; i++)
//Create individual buffer elements
imgCreateBuffer(Sid, IMG_HOST_FRAME, bufSize, &ringBuffer[i]);
//Now tell the buffer list where these buffers are by populating them into the Buffer List Bid
imgSetBufferElement(Bid, i, IMG_BUFF_ADDRESS, (uInt32)ringBuffer[i]);
imgSetBufferElement(Bid, i, IMG_BUFF_SIZE, bufSize);
//If we are still filling the buffer, this configures the current buffer on the list to move to the next buffer
//If we are configuring the last buffer in the list, this buffer will now loop to the first element when it is filled
bufCmd = (i == (NUMRINGBUFFERS - 1)) ? IMG_CMD_LOOP : IMG_CMD_NEXT;
imgSetBufferElement(Bid, i, IMG_BUFF_COMMAND, bufCmd);
//Locks the buffers in the buffer list
imgMemLock(Bid);
//Configure the session to be a ring acquisition using our buffer list
imgSessionConfigure(Sid, Bid);
Buffer disposal code:
//Unlock the ring buffer memory
if (Bid) imgMemUnlock(Bid);
//Free the ring buffer memory
for (i = 0; i < NUMRINGBUFFERS; i++)
if (ringBuffer[i] != NULL)
imgDisposeBuffer(ringBuffer[i]);
ringBuffer[i] = NULL;
//Free the buffer list
if (Bid) imgDisposeBufList(Bid, FALSE);
Bid = 0;

I have made some progress on narrowing the error down, but it still remains a large problem. Error trapping allows me to avoid the necessity of rebooting the system. However, I must still close and re-open my LabWindows application in order to successfully acquire from a ring.
I have narrowed the problem down to the buffer index provided by "imgSessionStatus" : on the acquisition that throws an error, it returns "-1" as the current buffer index. Why is this??
I have modified my program so that I close both the session and the interface when I hit "Stop", and yet I'm still receiving this problem when I attempt to restart the ring acquisition after stopping. I have also started using "imgStopAcquisition" instead of "imgSessionAbort". What could I not be properly resetting after I free, dispose and close the buffers, buffer list, session and interface? Obviously the resource is being properly freed upon application closure, so I must be missing something ...

Why does my cq-62 laptop gives me warnings about High CPU usage?

Similar Messages

Maybe you are looking for