Why does my cursor not work when hovering in certain sites?

My cursor does not bring up information when i hover in sites like appointment plus. I use safari, when i downloaded firefox and signed on the cursor worked, is there something i am missing? I prefer safari, but will switch to firefox if i have to.
At my office i have an old mac with snow leopard and the cursor works on that while on safari. my home computer has lion and it doesn't work

Your Mac sends traffic to the interface at the top of the list in
System Preferences > Network
When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
The solution is to cable that Printer to your Router, not to your Mac.
Alternatively, you could add a small Switch and connect your Mac and the printer to it.
If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

Similar Messages

HT4993 why does my internet not work when not connected to wifi?

why does my internet not work when not connected to wifi

Hi farmgirl0812,
Thanks for using Apple Support Communities. This article has steps to try if you are unable to connect to a cellular network:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
- Ari

Why does the alarm not work when the iphone 4 is turned off

why does the alarm not work when the iphone 4 for is turned off works fine when on most other phones work when off

The only phone I've ever had that would turn on and sound the alarm is a Blackberry. So, I'd hardly say "most phones" have this function.

Why does the mail not work when i updated my 5s to iOs 8?

why does the mail not work when i updated my 5s to iOs 8?

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

Why does my ipad not work when powered up and screen just lights up dark blue?

IPad Model A1219 does not respond when powered up, screen barely lights up just a dark blue screen thats it. will not do anything else, why?

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Why does my .vi not work when used as a sub vi

I have a vi that produces a picture on the front panel. Displayed in the picture are solid grey levels for testing. Two grey levels are chosen inside the vi and then the picture flickers betwen the two. When I run the vi by itself it runs wonderfully, but when I run it as a sub vi it does not work. Even when I just place the sub vi in the block diagram and connect all of the controls and indicators up it doesn't work.When I use the highlighter it shows that the control values go into the sub vi and the sub vi lights up, but there is nothing output from the sub vi to the wired indicators. When I open up the Block diagram of the original vi from which the sub vi came, and highlight it while running the subvi, it
shows that it is working with information running to all of the indicators. If I start a new program with only the sub vi in the block diagram and all of the controls and indicators connected, should it not behave as the sub vi? I will attach the vi that I am using as a sub vi, and I welcome anyone to place it in the block diagram of a new vi, connect all of the controls and indicators up and see if it works. I know that there is something completely obviopus that I am missing, but I can't see it. Any help would be greatly appreciated.
Attachments:
GL_Flicker.vi ‏74 KB

I think the subVI is working just fine when called from the main. I think what you're expecting is an indicator on the main VI to update as the subVI runs. What you will see on the main front panel is just the last value that a subVI has. That is the intended behavior of subVIs and function calls in all other languages. If you want to to update a front panel indicator while a subVI runs, pass a reference to the indicator into the subVI and update that reference instead of the indicator on the subVI. The other way is via a global variable. I've attached a modified version of your porgram.
Attachments:
Pass_a_Reference.vi ‏11 KB
GL_Flicker_mod.vi ‏66 KB

Why does diadem intellisense not work when using scriptinclude or for global object

I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.

Here is more information on the issue.
I have a script with a different classes in it (scripted 1). When I create an object of a class in the script 1 intellisense works. Intellisense is when you type name of the object created from a class it shows all the possible variables and functions contained in that object. But when I write another script and use scriptinclude(scripted 1) the intellisense does not work. I also tried a global object and intesllisense does not work. Is there a way to get intellisense to work when using scriptinclude? I am working with version 2012.
'Test.vbs
class test
    public function test1()
         msgbox("test1")
    end function
    public function test2()
         msgbox("test2")
    end function
end class
'now create a object of the class
dim oTest
set oTest=new Test
'now when you type oTest. you get the following functions to choose from
oTest.test1
        .test2
Now if you remove the object from Test.vbs and create a main program with scriptinclude(Test.vbs) it will not show the two functions
'Main.vbs
Option Explicit 'Forces the explicit declaration of all the variables in a script.
call scriptinclude("c:\1atmp\Test.vbs")
dim oTest
set oTest=new test
'now when you type oTest. it shows none of the functions in the object oTest
oTest.

Why does this script not work when run with osascript cli?

I wrote the following to interface with geektool to display a list of todo's on my desktop (i'm sure it's been done elsewhere, but I wanted to try it myself). I had it working fine until I tried ordering the output to place the highest priority items at the top of the list. The following code works properly during development in Script Editor, but when geektool launches the command using osascript ~/Library/Scripts/todos.scpt it only displays the initial "TODOS:" without displaying the rest of the info. Searching the Applescript Release notes, I found that some versions of Applescript 1.8 had issues with null characters when using the osascript cli, however, I'm running 1.10.7 so it shouldn't be an issue (and I'm not sure how to check for null characters in Applescript even if it were). Anybody have any ideas on what's going on here?
set output to {"TODOS:
set highpri to {}
set medium to {}
set low to {}
set nada to {}
tell application "iCal"
repeat with i in calendars
repeat with j in todos of i
if (completion date of j as string) is equal to "" then
if priority of j as string is equal to "high priority" then
copy summary of j & "
" to end of highpri
end if
if priority of j as string is equal to "medium priority" then
copy summary of j & "
" to end of medium
end if
if priority of j as string is equal to "low priority" then
copy summary of j & "
" to end of low
end if
if priority of j as string is equal to "no priority" then
copy summary of j & "
" to end of nada
end if
end if
end repeat
end repeat
end tell
return (output & highpri & medium & low & nada) as string

well, i'd been pulling my hair out for quite a while with this and decided it was time to ask for help, but I thought I'd give it one last shot and found a resolution almost immediately. I figured that problem had to be caused by the way applescript was concatenating the lists, so I got rid of the lists completely and it still wouldn't work. This convinced me that it must be newline related since that was the only special character left in the string. I opened up the script in vi, but the default compiled script format is not human readable. The osascript man page indicated that it would accept both compiled and text scripts, so I gave it a try, and osascript handled the raw text file wonderfully.

Why does my printer not work when i plug in the internet? (ethernet)

hey guys,
i have the Mac connected to a large digital printer via the ethernet connection. works fine, no problems untill i plug in the internet. I get an error message in my software and can't print any jobs, but the internet works fine.
I have a feeling that its a network problem, but don't want to mess around too much with the settings.
This is a company internet connection.
if anyone could advise of the possible network settings, I would be very greatful.
thanks again.

Your Mac sends traffic to the interface at the top of the list in
System Preferences > Network
When you plug in the second Ethernet, that Interface jumps to the top of the list and all traffic goes there.
The solution is to cable that Printer to your Router, not to your Mac.
Alternatively, you could add a small Switch and connect your Mac and the printer to it.
If you really want to you can use Internet Sharing to add the Ethernet port going to the Printer to the Network connacted to the Internet.

Why does my ipod not work when i plug it into the wall and work when i plug it into my computer?

hello?

What do you mean by works? Do you mean the battery chares on the computr but not with the wall charger?
Did the wall charger ever charge the iPod?

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Why does flash player not work with facebook?

Why does flash player not work with fcebook? Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player. When I go check which version I have, I always get the message that I have the most current one. I run Mozilla Firefox with Windows. I don't know anything else.
Message was edited by: khettich

This means you don't have the latest version installed. Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

Why does i photo not launch when i click on icon in dock?

Help why does i photo not launch when i click on icon in dock?

The icons in the Dock are aliases. If iPhoto isn't launching from the dock the alias may be broken. What you can do is first test to if iPhoto is working by launching the app from the Applications folder. Once you have determined iPhoto is OK then remove the old Dock icon by holding it down and dragging it to the desktop, it will disappear in a puff of smoke. Then go to the Applications folder and drag the iPhoto icon to the Dock and test it.

Why Does Dynamic Link Not Work

I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.

Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From:   Colin Brougham <[email protected]>
To:     Dan Seanor <[email protected]>
Date:   03/15/2011 09:55 AM
Subject:        Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it.

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Why does my cursor not work when hovering in certain sites?

Similar Messages

Maybe you are looking for