Why does my drawing tool go see through in onion skin mode?

I'm using CS6 photoshop as an animation software and I'm new to the process. When I try to draw on the next frame, the paintbrush draws in a see through colour.... as if the drawing tool itself has an onion skin.

Thanks for the response Rudegar, but I was under the impression that this could work (as explained to me by a Apple sales guy) when I bought the AirPort Express. (and yes I told him I had a Samsung laser printer ML-1915)
Is the AirPlay printer requirement only an issue when the AirPort Express is in server mode?
I thought I could just extend my network in Client mode from the AirPort Express.
So when it talks here about a "wireless print server" it is only referring to either a): ipad to AirPrint printers or b): Windows to any printer?
http://support.apple.com/kb/HT2272
Is Apple going to support more printers anytime soon? Because I am happy that my 3 Windows laptops/PC can print wirelessly through Apple gear but kinda confused why my ipad will not play nicely.

Similar Messages

Why does the pen tool remove previous line when I add new anchor points??

Why does the pen tool remove previous lines??
Video here: http://youtu.be/8AmPUkD88h0
It removes the hairline on the face, when I add more anchor points. Why? And how do I correct it?

The ins and outs of the new and changed behaviors in the re-engineered pen tool have been disussed here on this forum and I'm sure a little detour to the help files will also shed some light on this...
Mylenium

Why does the type tool and note tool close my InDesign program? [was: InDesign CC technical]

Why does the type tool and note tool close my InDesign program?

Install the CC Desktop app, or try Help > Updates....
If all else fails, you can try Crash | Launch, selecting Type tool, but there are other bug fixes in the update.

HT3529 when i send a text/imessge why does the person recieving it see my email address instead of my name?

when i send a text/imessage why does the person receiving it see my email address instead of my name??

iMessage requires both parties be using iOS 5. The iPhone 3 can not be upgraded to iOS 5, thus messages would be sent as an SMS (Text message)
Stedman

Why does the video freeze half way through my movie and the audio keep going?

Why does my movie freeze half way through and the audio continues?

Most likely this is due to running out of virtual memory. You can reset virtual memory by restarting your Mac.
Long term you may want to consider purchasing more memory.

Why does my i pod stop playing and go to charge mode

why does my ipod stop playing and go to the charge mode?

Hey there gillly,
It sounds like your iPod Classic is not playing back your music correctly. You should use the following article to help resolve the issue here, named:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Start by resetting your iPod, and work your way through the article as needed:
Reset
To reset your iPod:
1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
2. Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.
Thank you for using Apple Support Communities.
Take care,
Sterling

Why does Calendar not go back to all entries in list mode after upgrading to iOS 6?

Why does Calendar not go back to all entries in list mode after upgrading to iOS6?

I have an iPhone 5 running at iOS7.1.1. The Calendar list mode previous to iOS 6 showed all past entries, which I found very useful. After the upgrade, it only showed the previous 12 months (as I recall). All past entries are still present, you just have to exit list mode to see them. I'm asking this now after finding the forum for the answer to rediscover the list function in iOS 7.

Why does apple tv play my photos randomly in screen saver mode when random is not selected

why does apple tv2 play my photos randomly in screen saver mode when random is not selected?

Thanks for that.
Random is not selected in transition or anywhere else. Unless I am missing something in the settings.
So why is it playing my photos ramdomly in screen saver mode ?

Why does the local dimming system work differently in different picture modes on the w950b?

Basically I was wondering why the local dimming is much more effective in the cinema mode than in other picture modes like game mode. For example, using the Disney World of Wonder advanced brightness test pattern, the blacks were very nice and dark with full clarity and detail of the test stars with local dimming turned on while in the game mode, all the local dimming seemed to do was get rid of some clouding but left the blacks looking greyish and hazy which obscured the clarity of the test stars. This is my first Sony tv and I really like the general picture quality but I've had tvs from other brands with local dimming that worked the same in all picture modes but the sony is the only tv where there is such a radical difference in how the local dimming is implemented in different picture modes and I was wondering why that is the case.

On the Home screen, double-tap with three fingers to exit zoom.
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129

Why does the straighten tool in Elements 11 freeze when I try to use it?

When I click on the straighten tool and then click on a horizontal line on my photo, as I attempt to draw the line across the photo it freezes after a fraction of an inch and rotates the photo before I've drawn the line along the horizontal feature I'm using and it's always wrong. I had this problem with my downloaded trial version of Elements 11 and it appears on the version I purchased in the store today.

I was able to replicate this problem and believe it may be a bug, although I did find a "workaround".
The straighten tool was only drawing for a very short distance and then I would no longer see the straighten line. Of course, this prevented me from using it properly. I followed the suggestions in this thread and reset the preferences. The Straighten tool worked normally until I enabled the ruler under the View settings. Once, the ruler was enabled the straighten tool started doing the same thing it did before. I turned off the ruler and it started working normally again without re-opening the program. I tried the ruler both in the default inches measurement as well as pixels (my personal ruler preference).
The workaround would be to turn off the ruler while straightening. However, I hope this is fixed in a patch. I didn't have this problem with Photoshop Elements 9, the last version of Elements I had prior to upgrading. For the record, I'm running Windows 7, just installed Photoshop Elements 11 and immediately downloaded the updates, which I believe was just the Adobe Raw 7.3 update.

Why does the knife tool leave gaps in the shape? (CS6)

When I use the knife tool on an shapeit leaves a gap where I slice. First I thought it was just an illusion in the program but it stays even after I've exported the image (both by "save as" in illustrator and "export" in inDesign). I've been careful not to move the shapeafter I used the tool so I don't think that should be a reason.
I've tried on different types of shapes like normal circles and more complex shapes. I've also attempted to start a new file from scratch but with the same result What could the reason be? Is there a setting I should be aware of?
This is what I see in Illustrator:
And this is what the image looks like when saved as pdf (in illustrator):
It also looks the same if I place it in inDesign and then export to pdf.
EDIT: I don't know if it is important but the size of the shape is about an A4 or there about.
Best regards,
SirSkorpan

Thank you for your reply, I still have a slight problem though,
Turning off anti-aliasing in illustrator did take away the gap when viewing the artwork in illustrator, but as soon as I export it through inDesign or use "save as" to make a pdf the gap is back. Is there an option to turn off anti-aliasing when exporting a document?
This is what I see when zooming in max (6400%) in acrobat reader:
When u say it's a screen issue do u mean that the gap won't show when printed? The problem is that I'm doing artwork that will be shown digital as well. Is there a way to get rid of this?
Thanks again for taking your time.
Best regards,
SirSkorpan

Why does my iphone no longer play through my stereo

I recently updated my iphone to iOS 6 and now it doesnt play through my dock or my car stereo!!.. nor does my ipod?!?!?1 im not impressed.. anyone got any suggestions ???

Thanks for your help, much appreciated.
Same phone, same tv, same broadband network so everything the same so I assumed that it would.....just work!!! :-)
I'm away this weekend but I'm going to turn off and reload the Apple TV to see if that might work.
If not I may be begging your assistance again next week!!!
Have a great weekend.

Why does the clone tool not work? I just installed elements 9.

I bought photoshop elements through an online vendor and just trying to put it to use. The clone tool does not work at all. I have photoshop elements 5 on my computer, which I kept even after installing version 9. It works.

Try selecting the clone tool and doing a tool reset.

Why does the select tool stop working and images save with areas missing?

I have been working on an image using simple tools (only select, crop and scale) and no more than 4 layers.
The quick selection tool, magic wand tool and polygonal lasso tools are not selecting simple areas. They leave square sections unselected, and eventually I can't select anything on my canvas. The paint tool also does not work. I decided to save the image I had made even though it was unfinished, and upon reopening the file (a PSD) there were square transparent areas that were not there when I saved it (see image)
This is what I've tried:
I work on the layer selected
I have reset all the tool settings back to the default ones
I have reset the program preferences back to default settings
The Photoshop CC software is up to date
I have turned the program and my computer on and off again
Can someone please help?

Is the damage actual or only display (are the layers complete according to their previews in the Layers Panel)?
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
What have you done for trouble-shooting so far? (Restoring Preferences after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved mis usually a good starting point):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

Why does the DB Tools List Columns.vi only report -1 for the defined column size?

I am using LabVIEW 8.2.1 with the database connectivity toolset with an SQL Server 2000 database. I would like to see how large a full record could be, so I used the DB Tools List Columns.vi in the database toolset. It easilly displays the column name and the column type, but only returns a -1 for the defined size. Of course when I add up the defined size elements, it gives me -351, which is the number of columns in that particular table. The vi I am using is very simple. I open a database connection, retrieve the data, and close the connection. The retrieved data is an array of clusters. I index it by running it through a for loop, and unbundeling each of the three parameters, and reforming arrays at the end of the for loop. This is as about the simplest vi I have ever made, but only part of it works.
Attachments:
Table size.vi ‏23 KB

SciManStev-
I don't know if this gets you the functionality you want because I don't have access to your file, but I would have code it this way (see attached picture). I would have used a Array to Cluster.vi to convert the column info ouput array into a cluster so I could use Unbundle by name. I think this is what you are wanting because from what I see, you only access the file once everytime the VI runs (right?). Try this and let us know how it works out. Thanks!!
Grant H.
National Instruments
LabVIEW Product Marketing Manager
Attachments:
untitled.JPG ‏29 KB

Why does my drawing tool go see through in onion skin mode?

Similar Messages

Maybe you are looking for