Why does my E72 create a PDP context without my pe...

Why does my E72 create a PDP context without my permission and send data to 131.228.18.5 ?
No apps are running.
Connection set to "when needed"
I haven't installed any new apps.
Email not configured.

Host name of 131.228.18.5 is em1x-5.lhr.messaging.nokia.com
Do you have email accounts set up to synchronise automatically or via OVI mail or Nokia messaging?
How did you find yout the IP-address of the destination?
I never managed to find that out unless i sniffed network traffic over the WLAN.

Similar Messages

Why does mail keep creating a new junk mail folder?

Why does mail keep creating a new junk mail folder at the bottom of my folders. This is in addition to the standard junk mail folder.

Hi Michael
Welcome to the forum.
Do you have Stuffit installed and are saving to the desktop?
Because in that case it is Stuffit decompressing the Pages document's package.
Just save to your document folder.
Peter

Why does the Date Created metadata change when images are exported?How do I stop it from changing?

why does the Date Created metadata change when images are exported? How do I stop it from changing? I must have a prefernce set up wrong.

I don't know what OS you are using, or what application you are using to view the data about your exported files, but on Windows and using Windows Explorer the "Date Created" field relates only to the date that the exported file was created, i.e. if viewed immediately after export it will show the date created as being the same date. In order to view "Capture Date" in something like Explorer, you first have to ensure you have included the Metadata as Conrad outlined above, then you have to adjust the display properties of Explorer to show the "Date Taken" field. Here is an example, part of a folder I exported back on March 3rd, note the difference between that last two dates:

Why does my mac create extra archive copies

why does my mac create extra archive copies

osx 10.6.7 is creating a duplicate archive copy of any file?
For example i click on hold option on keyboard then let go on desktop it would normaly make a second copy but this time it is makeing a third copy but as an archive type that includes a black arrow along side the third new copy?
how or where can i turn that feature off or disable that archive third copy setting....
Thanks.....

Why does the cursor stick, jump and choose without clicking?

why does the cursor stick, jump and choose without clicking?

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Try the suggestion in this article.
http://support.apple.com/kb/TS1248
If this does not help, contact Apple.
Best.

Why does wsusservice.exe create csrss.exe child

Hello all,
I have a 2008 standard server with WSUS service installed. My question is why wsusservice.exe is creating csrss.exe as a child along with winlogon.exe when everywhere I have read says csrss.exe should only be the child of smss.exe.
I have checked with multiple other servers and desktops (win8,7,2k12,2k8 without wsus) and smss is always the parent of csrss.exe. So I am guessing it has something to do with the WSUS service but I am not sure why it would be creating csrss.exe and winlogon.exe.
Any help would greatly be appreciated!
P.S I cant provide much info because IT wont let me but I am in the process of trying to recreate the situation in some VM's. If I can reproduce the csrss.exe occurrence I will post process details.
The only info I have currently is that Wininit.exe is the parent to services.exe, which is the parent to wsusservices.exe which is the parent to csrss.exe.
Thanks,
Chris

Hi Chris,
I have checked it in my lab and can't find a csrss process created by wsusservice.exe.
>>I have read says csrss.exe should only be the child of smss.exe.
CSRSS runs as a user-mode system service. When a user-mode process calls a function involving console windows, process/thread creation, or side-by-side support, instead of issuing a system call, the Win32 libraries (kernel32.dll, user32.dll, gdi32.dll) send
an inter-process call to the CSRSS process which does most of the actual work without compromising the kernel.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why does iweb re-create everything during publish?

I'm wondering why iweb has to create pages that have long since been created and published when I do a minor update? For instance, I just created a new photo/blog section and for some reason it is re-creating almost every page during the publish, making it take much longer....any suggestions?
Thanks,
Steve

I did not create a new header, but the part that I did update was under both blog and photos.
so for example....everytime I put a new blog entry in, it has to re-create the entire blog?
thanks for your help.
Steve

Reinstalled Itunes and how have 4 to 8 copies of all music (7,500). This has happened before, called apple, sorry you will need to delete each. question why does it happen and can it corrected without one song at a time

reinstalled itunes and have 4 to 8 copies of each song. This is the third time has happened over last 3 years. Called Apple, they state must delete extra songs manually, is there a quicker way and why does this happen. I have Iphone, can I delete all music and copy from phone?

Man I hear your pain, same happened to me. I never worked out a way of deleting all the duplicates and I'm guessing it occured as you imported your library more than once.
However it is possible to delete everything and copy from an ipod using different utilities out there on the net, try googling ipodutil as an expample, although I don't know if this works from an iphone but it worked for me copying everything back from an ipod into itunes.

Why does FireFox change layout/settings during upgrades without asking ?

Just upgraded to Firefox 18 (windows 7 desktop). Why does Firefox change layouts/settings without asking the user if he wants it or not???
I am getting sick of those changes. I want to have at the google main page the options (as before) to search in all languages, or pages from a certain language or pages in a certain language (of course depening of the google address; f.i. at google.de for german languages, google.fr for french languages etc).
In the latest Firefox 17 it was working as I wanted and described before: when I visited www.google.de/firefox of www.google.fr/firefox. Now those 3 options (under the search bar) are gone and I do not want to operate by clicking on the advanced search button. Those things should be visible under the search bar again.
Also my STARTPAGE was GONE/DELETED after the update !!! Grrrrr.... Updating is OK but mozilla should not change user configured items !!!!!!!
The above described problem has nothing to do with the google website.

By the way, do Firefox and IE use the same proxy settings? You can view Firefox's here:
orange Firefox button (or Tools menu) > Options > Advanced > "Network" mini-tab > "Settings" button
The default is "Use system proxy settings".

Why does Pages keep creating a new folder everytime I save?

There must be some easy explanation for this but there's a weird quirk in Pages '09 that I don't know how to turn off.
Every time I save a document, not only does it save, but it creates a new folder with some new files labeled buildVersionHistory.plist and index.xml and then a subfolder called Quicklook within which there's a thumbnail.jpg.
No idea why it's doing this but it's really clogging up my folders and it seems totally unnecessary. Can anybody help me turn it off?

Hi Michael
Welcome to the forum.
Do you have Stuffit installed and are saving to the desktop?
Because in that case it is Stuffit decompressing the Pages document's package.
Just save to your document folder.
Peter

Why does Mail keep creating a Junk folder that I don't want

I don't want Mail to filter for Junk because it always gets it wrong. I have another, better filter. I have unchecked the box. Nevertheless, Mail persists in creating a Junk folder and occasionally putting messages into it. Many of these messages are perfectly good and go unnoticed for a few days before I notice them in the new Junk folder. I keep deleting the folder, but eventually it comes back again.
Why is it doing this, and how can I stop it??

Thanks for your interest, but unchecking 'Enable junk mail filtering' hides the junk folder, and it will not be regenerated unless Apple Mail unilaterally decides it wants to put something in it. This problem only started for me last year, and for years before that, I did not have a Junk folder. My own spam filter (Spamsieve) works perfectly well.
As I have unchecked 'Enable junk mail filtering', the two options you mention do not exist: they are greyed out.

Why does PE10 crash creating a slideshow?

I have created numerous slideshows with many images using the nice Pan&Zoom features. However, PE10 will crash upon creating the output video. This is dependent on the resolution chosen.
I don't seem to have much trouble with 720x480 DVD output. 800x600 will also work most of the time, but 1024x768 will fail often.
I have been able to get all modes working by simply saving my project, closing PE10, reopening the app & prj, and then doing the output video creation.
So it seems there maybe some memory leak bug or something like that. For example, when the 1024x768 mode works, if I move onto more projects & video outputs, eventually PE10 will crash.
But if I close, and re-open, then all seems to be fine. PE10 wants a clean start.
PE10 is the first version I've had where Photoshop Elements has crashed numerous times for varied reasons, and yet Premiere Elements seems ultra stable in comparison.
Sure would love to see an update for both though from Adobe - why is there no update by now?

JMBinCO wrote:
I have created numerous slideshows with many images using the nice Pan&Zoom features. However, PE10 will crash upon creating the output video. This is dependent on the resolution chosen.
I don't seem to have much trouble with 720x480 DVD output. 800x600 will also work most of the time, but 1024x768 will fail often.
I have been able to get all modes working by simply saving my project, closing PE10, reopening the app & prj, and then doing the output video creation.
So it seems there maybe some memory leak bug or something like that. For example, when the 1024x768 mode works, if I move onto more projects & video outputs, eventually PE10 will crash.
But if I close, and re-open, then all seems to be fine. PE10 wants a clean start.
PE10 is the first version I've had where Photoshop Elements has crashed numerous times for varied reasons, and yet Premiere Elements seems ultra stable in comparison.
Sure would love to see an update for both though from Adobe - why is there no update by now?
The slideshow output process of the Elements Organizer uses Windows Temporary files. Therefore it is my suspicion that you are reaching some limit on those Temporary files - either the disk space on your hard drive or specific Windows OS limits on Temporary files.
Geneeral considerations are
-- Therefore doing the Windows disk cleanup process for your hard drive might make available more hard drive space for the temporary files needed during the slide show editor output process.
-- Your reported results that closing Photoshop Elements and restarting again can avoid the problem (for awhile) seems to confirm the possibility of some type of space or temporary files problem.
-- Since your are failing for 1024 x 768, I suspect that you are not actually burning a physical disc. So I think that 99jon's recommendation might need to be modified to say that you create the 1024x768 wmv file from Premiere Elements instead of burning a disc.
-- If your problem is insufficient hard drive disc space, then I doubt that sending to Premiere Elements for output can solve insufficient space.
-- If your problem is specifically Temporary files, then using Premiere Elements for output might avoid that problem. However, I would try a Disk Cleanup first.

Why does my computer create web connections to addresses in the Amazon, Google and Youtube range when I start Firefox?

I think I already disabled all the updating functions, yet, SOMETIMES when I start Firefox, (with about:blank), my network monitor shows one to five connections to IP addresses mostly in the 74.125.225.x, 74.125.227.x, 74.125.228.x, and 72.21.x.x ranges. Those ranges include Google, Amazon, and Youtube.
I use Kaspersky, and have scanned multiple times for malware, and even had their technical support look into my computer. They see no malware. It is the Kaspersky Network Monitor that revealed the problem.
As I find them happening, I try to jot down the addresses, (quickly, because some of these connections only last a second or two), then add those to a firewall rule I created to try to combat the problem. Yet, next time I start, new addresses are "attacking". Of course, some get away, because I don't get the address jotted down before it goes away. At one point I used masking that ended up keeping me from Google and Youtube, so I have to add the addresses individually, and my block list in that one rule is 13 items long now. The only IPs not in those ranges are 23.5.251.27, and 173.194.46.5. Not sure where those go.
I used to get attacked by addresses in the range that includes Amazon ... 72.21.x.x. I have a separate firewall rule for them that has 33 addresses being blocked.
I should not have to do all that. Firefox should start and just sit there quietly until I start clicking or typing in it. This has been happening in Firefox versions going back to 11. May have gone on before that, but I wasn't tracking it then.
Also, it doesn't always happen, or, more precisely, with addresses I have not already blocked, (because my only way to know it's happening is when the connections are allowed to be made). It does not always happen right after Firefox is up, but sometimes several minutes later. I have started Firefox and just sat and watched the network monitor without doing anything in Firefox, and have seen this happen up to 15 minutes after I start Firefox ... mostly just two or three minutes when there's a delay at all.

Firefox does not do anything but sit on about:blank after I start it as long as I have a firewall rule enabled that completely blocks these subnets:
74.125.222.0/24
74.125.227.0/24
74.125.228.0/24
173.194.46.0/24
173.194.115.0/24
173.194.121.0/24
64.233.171.0/24
54.230.90.0/24
54.230.88.0/24
72.21.194.0/24
72.21.195.0/24
72.21.215.0/24
207.171.163.0/24
Otherwise, Fire fox creates connections to one to five addresses in those ranges. Note that there are more than 5 subnets above, but usually three connections satisfies whatever purpose these connections are being made for. If I had some links or whatever that is causing these connections, I would expect all of them would come up every time.
Also, these connections do not start immediately upon starting Firefox, they wait up to 15 minutes to start ... fifteen minutes of just sitting idle ... no actions on my part that could possibly initiate them. Usually these start within three minutes. A typical ploy of malware is to wait until no one is looking, or the until there's a forest to put their tree in so it won't be noticed.
While the above rules are in place, I do not have access to Amazon, Youtube, or Google, (or any of the various blog sites and services sponsored by Google, including Google Maps and Gmail). That list may not be complete, as I have other firewall rules in place that mainly block individual addresses.
It seems to me as simple as; figure out who owns those subnets, and you have your bad guys. Then go after them.
It's true that I have a bookmarks to Google, Gmail, and Youtube, but these are not "active" bookmarks nor RSS feeds. I have not voluntarily gone to Amazon on this computer.
The traffic being transmitted is unknown. It is usually not extremely large amounts of data ... less than a meg, but I have seen close to a Gig transmitted out of my computer, and over 400 meg transmitted to my computer, when I was not paying attention to block the offender. Even if it's small amounts, things like cookies, path structures, configuration settings, histories, etc. do not involve a lot of data, but, to me, represent a security breach, if someone decides to look at them unsolicited by me, not unlike your landlord, mortgage holder, or neighborhood police officer walking into your home while you're not there, and taking pictures of, or simply inventorying your belongings.
It is VERY much like some sort of backdoor malware. No malware is detected on my computer.
I looked at the suggestion above for OS changes for logging HTTP activity, but the author neglected to include instructions for backing out these changes after using them. If this were to create more jewels in a drawer the thief has access to, reformatting and restoring my drive is not the kind of back out process I enjoy. Therefore it would be foolish to apply them. To me it would be like bungee diving with no bungee. Fun until you hit the bottom. Give me the bungee, let me make sure it's short enough, then I'll dive.

Why does my template created page jump out of sync?

Hi there
I'm relatively new at this, having read classroom in a book on Dreamweaver CS6 I thought I'd attempt my own website.
I't's relatively simple and contains only 4 pages derived from a template.
3 of the pages look fine and jumping from one to another everything is precisely registered.
1 page however refuses to play ball and is horizontally out of register with the other 3 pages- it moves about 3 mm to the left
I've isolated this as being down to the text in the main editable region. If I remove a paragraph (it doesn't matter which one) it returns to being in register with the other pages.
When creating the template itself I did leave a lesser amount of text in situ in the editable region so that I could simply cut and paste over it, I also did this for the heading which seems to work fine.
Below is the problem page code About Graphic Communication and a welcome page code which is fine
Also attached link to site which is being hosted externally (set up by someone who knows what they are doing)
Contact Details
Any help would be gratefully received
Many thanks
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>About Graphic Communication</title>

<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />


</head>
<body>
<div id="wrapper">
<div id="logo"><img src="Images/Logo%20200x130px.jpg" width="200" height="130" alt="logo200x130" /></div>

<div id="header">
    <p> </p>
    <h1>About Graphic Communication</h1>
</div>

<div id="picture"></div>
<img src="Images/cavepainting.jpg" width="760" height="250" alt="cave painting of early communication" />
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="index.html">HOME</a>    </li>
    <li><a href="about.html">ABOUT</a></li>
    <li><a href="portfoliopage.html">PORTFOLIO</a>    </li>
    <li><a href="contact.html">CONTACT</a></li>
</ul>

<div id="content">
    <p>As far back as I can remember, I’ve always been inspired to draw and paint, so a career in art and design was always on the cards.</p>
    <p>After 4 years studying graphic design to degree standard at Cornwall College, I graduated as a diploma member of the Society of Industrial Artists and Designers in 1982.</p>
    <p>Over the years, I’ve worked in Audio Visual, Packaging and POS, Cosmetics and Beauty Products, Engineering, Christian Publicity and the Pharmaceutical Industry, to name but a few. Starting out with paste-up artwork on drawing boards, hand drawn marker visuals, and long hours in darkrooms, time has seen many changes with equipment and working methods. However, though the tools have changed, my aim has always remained the same — to produce effective, relevant, graphic communication.</p>
    <p>Graphic communication is everything — it has always been. From the very first marks we humans ever made representing our ideas and experiences, to today’s fast changing digital world, and beyond, it’s the culmination of an inventive ideas process that effectively communicates our intent and values to others.</p>
    <p>For the designer, it means a partnership between the client's aims and the designer’s creativity, defining a common vision and honing all the possibilities of outcome into a single bespoke solution that’s distinctly right for your business, not someone else’s.</p>
    <p>Good design simply means great graphic communication.</p>
</div>

<div id="footer">© Kevin Raddy 2014</div>
<div id="pictureborder1"></div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />

<title>Welcome to Graphic Communication</title>

<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />


</head>
<body>
<div id="wrapper">
<div id="logo"><img src="Images/Logo%20200x130px.jpg" width="200" height="130" alt="logo200x130" /></div>

<div id="header">
    <p> </p>
    <h1>Welcome to Graphic Communication</h1>
</div>

<div id="picture"></div>
<img src="Images/Voyager 26 web.jpg" width="760" height="250" alt="Voyager spacecraft" />
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="index.html">HOME</a>    </li>
    <li><a href="about.html">ABOUT</a></li>
    <li><a href="portfoliopage.html">PORTFOLIO</a>    </li>
    <li><a href="contact.html">CONTACT</a></li>
</ul>

<div id="content">
    <p>Welcome to Graphic Communication, the website of freelance graphic designer Kevin Raddy. With over 20 years design for print experience, I offer a friendly, professional, design and artwork service at competitive prices.</p>
    <p>Whatever your design need, my aim is to make a difference to your business through creative and effective use of graphic design. I’ll strive not only meet your expectations, but through creativity, inspiration and communication, exceed them—that’s good for your business and unsurprisingly, it’s also good for mine. </p>
    <p>Whether you are looking for a new logo, branded stationery, leaflets, a corporate brochure or any type of design for print project, Graphic Communication prides itself on delivering on time—on budget solutions, aimed at total customer satisfaction.</p>
    <p> </p>
</div>

<div id="footer">© Kevin Raddy 2014</div>
<div id="pictureborder1"></div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>

Normally you would have an external style sheet for your site. Each page would be linked to that style sheet.
In your case, you have placed the style rules in the document, which is Ok except when it comes to maintenance.
To answer your question, place the code just above the body style rules as in
html {
overflow-y:scroll;
body {
background-color: #000;
text-align: center;
margin: 0px;
padding: 0px;
color: #EEE;
If you do have plans to use an external style sheet, the rule for the html will not adversely affect other pages.

Why does Captivate 6 create mp4 files that the swf does not playback clearly?

Captivate 5 created a .swf which suited my training purposes very nicely. There were swf files in the library, embedded in the (rather large) .swf that I asked the students to run. Now it seems that Captivate 6.0.1.240 won't do that. Captivate 6 creates external mp4 files for the video portion (audio is separately recorded mp3 that is imported to the finished demo video slide) and they look terrible when the .swf runs them. Those mp4 look fine on their own but the .swf must resize them to properly fit with the TOC on the screen.
The HTML created when I make the .swf looks fine but it does not all fit on the screen as does the .swf so I don't like it and don't want to use it. Thanks, in advance, for any replies and suggestions.

Hi llstewart,
I assume you are launching your program from C drive. Are any
components of Captivate stored on the remote drive? (I am thing
your user profile, are you the only person who accesses Captivate
from that machine?)
Does this happen all the time?
What I have noticed in my own network is that there are
periodic "dropped" connections on the network. I have never figured
out what it causing this, but Captivate does not like it. (Every
once in awhile if Word or Excel are writing to a file on a share,
they will become thoroughly corrupted too.)
The problem with Captivate is that it needs a lot of a
computer's resources and takes what it can get. It also seems to
write to a temp file a lot (while a capture is taking place) an
only "binds" it up when the user stops and ends the session. The
only thing I can think of is that during this process there is a
inturruption in your network.
Sorry I couldn't fully answer your question.
I would try (if you can) loading the software on a machine
that is not on the network and try to do a series of long captures
and see if the problem persists.
I work in a large network and I do not have the problem, but
I have also installed the software myself and made sure of the
installation. I also make sure the program I am recording is local
(whenever possible). Additionally, do you have problems with any
other programs and corrupted files?
Again, sorry I don't have a quick answer.
TPK

Why does my E72 create a PDP context without my pe...

Similar Messages

Maybe you are looking for