Why does my form load in the wrong position on some pages?

I have a contact form on the Master Page of my site which periodically loads off set to the left on some pages.   It doen't always do it and it only does it on some pages, which makes no sense as it's a Master Page element.
On the below page the form is in the middle of the black strap where it is ment to be -
http://www.iheartmylife.com/compliments.html
On the below page it has loaded off set to teh left -
http://www.iheartmylife.com/index.html
Can anybody help me figure out why this is happening?
James

Hi James,
I've updated Emily about this issue via case. Please test the proposed solution.
Regards,
Aish

Similar Messages

  • TS3376 Why does my Mac appear at the wrong location, yet my iPad appears at the correct addrtess?

    I switched on Find my Mac and iPad just to check it worked and the Mac appears at the wrong address and with a totally different postcode, yet the iPad appears over the correct address? (They have the road name incorrect but that is the same on Google maps!)

    My Retina MBP, my Mac Mini and my iPad have a location that is not just a bit inaccurate but in the wrong country. I have now been at my French house for over a week and locations on all three of these have not updated from my UK address. This shows in Auto Time and Date location, Maps and Find my Mac/iPhone. My two iPhones (UK and France) have updated as expected. I have tried switching location in Time and Date to somewhere odd (Delhi), deleting the com.apple.maps.plist, all to no avail. I have done a reset on the iPad. All to no avail. All three think they are still in the UK. Any way to force a location update.
    Wilson

  • Why does my playhead return to the initial position when pausing/stopping playback after playing from beginning?

         How do I prevent the playhead from returning to it's original position after pausing or stopping with the spacebar or k button?  With either the skimmer on or off, whenever I pause or stop the **** playhead will always return to the position it was last at.  I don't understand why neither of the shortcuts would just stop the playhead at the point that is being played at.  This may seem like an extremely edgy way to go about editing, but I might actually wish to pause the playhead at any given moment and position my playhead nearby said moment before creating an edit point (without having to add a marker and return to it with the blade tool, or take note of the specific duration and use the duration control to go to that specific point or any other unnecessary steps when doing a rough cut).  I simply would like the playhead to pause/stop at the moment I press either keyboard shortcut.  After the many attempts at trying to make FCP X work for me and the many "workarounds" by FCPX enthusiasts, it's disheartening to know that most other editors in my circle who make a living doing paid commercial work are wondering why I've decided to take a break from using CS6 (and it's integration with the industry-standard AE) to give FCP X a shot, all to make very simple tasks like the one aforementioned a mystery...  any help in this matter would be greatly appreciated.

    Thank you for your response Luis and for your previous help (regarding multiple selections being added to the timeline in reverse order when working in list view in the event browser).
    Yes i've trashed my preferences, but I should be more specific as to what I am actually doing.  Because I am working from my macbook pro and do not have a "home button" which was the original shortcut to "play from/go to beginning" and because I did not like the replacement shortcut in FCP X to play from beginning (without a home button it was something like Function + Shift something else on a laptop) I became used to Adobe Premiere CS6 and made the return key my "play from beginning" shortcut.  It was available and did not have a use by itself (only to confirm changes/choices), did not effect it's use in conjunction with other shorctus so I choose enter as my "play from/go to beginning"...
    So when I play from the beginning and attempt to pause or stop the playhead, regardless of how I choose to do it (spacebar or k) it does not stop at that specific instance and always returns to where it previously was.  This seems very confusing and inconvenient, I would hope at least one of these shortcuts would actually stop the playhead where it was at that moment where I press stop or pause.  It's extremely frustrating knowing that I cannot pause the playhead where it's playing if I choose my "play from beginning" shortcut.
    Also since you seem to be a guru and an expert, i'd like to know if you cut with FCPX on a laptop and what shortcut you use whenever you'd like the playhead to go to the beginning of the timeline, end, etc since there are no "home" or "end" buttons on a laptop....
    Thanks a million, talk soon...
    Anthony

  • Why does my form data gets cleared out when clicking on the back button.

    Can someone explain why does my form selections get cleared out when clicking on the back button.
    I have a JSP page that displays a form with some selections and text boxes. I populate the page and submit the request. The action on the submit call another jsp page, which processes the data and displays the results via a <jsp:include> statement which calls the results page. When clicking on the back button from the results page, it returns me to the form page, but the selections are cleared out.
    1. Is there something in my calling of the pages that causes this behavior and can I prevent it?
    I notice that the behavior is different when using the IE 6.0 version Netscape 7.1. IE clears the page Netscape 7.1 retains the settings.
    If I cannot prevent this behavior does that mean I will have to save the state of the form data. And if I have to save the form data, what would be the easiest method of doing this. I'm a beginner to JSP and Java, but have some ASP experience. I don't understand why the back button in a JSP request clears the form data but a regular HTML page does not can someone explain?
    THANKS.

    the browser doesn't have to remember what you submitted and fill that back in.
    you can't prevent it unless you can ensure a new request to the server in which you can fill the default values in there.

  • Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

    Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
    Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
    Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

    Funny how you answer to "troll". (What's your handle on AT&T forums?)
    Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
    I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
    Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
    We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

  • Why won't imessenger load on the iPhone4?

    Does anyone know why iMessenger will not load on the iPhone4?

    What do you mean "will not load"? It's a built in feature that you access through the Messages app. Can you be more specific about the problem you're having?

  • Why does Adobe refuse to provide the latest version of Camera Raw (like my Canon 6d) for CS5?

    Why does Adobe refuse to provide the latest version of Camera Raw (like my Canon 6d) that could be supported in Photoshop CS5 or earlier?  Its like Adobe saying you want a Camera Raw for you Camera then buy CS6 which is insulting to your customers.

    Kenny_777 wrote:
    Why does Adobe refuse to provide the latest version of Camera Raw (like my Canon 6d) that could be supported in Photoshop CS5 or earlier?
    Adobe's policy to to provide free updates (not upgrades) for currently shipping software, which means the current Photoshop CS6 and Camera Raw 7.x. Development on Photoshop CS5.x and Camera Raw 6.x stopped when Photoshop CS6 started shipping. While it may appear on the surface that's it's a ploy to force users to upgrade to the most recent version when getting a new camera, it's really a policy based on the technical issues of trying to provide backwards compatible software for application that are no longer being developed.
    Camera Raw is a plug-in for Photoshop and as such, it is dependent on the Photoshop SDK in which it loads...it's also dependent upon the system level APIs being used by the applications. Could Adobe keep upgrading old software? Yes, but it would be a technical nightmare.
    Your alternative is simply use the free DNG Converter if you want to use new cameras that weren't in existence when your old software was developed. Pretty simple really and it's not designed as insult to Adobe customers...it's actually an affirmative program to make sure current users are provided support.
    The problem of new camera support for old software is really a problem caused primarily by the camera companies spawning off new cameras whose file formats are undocumented and proprietary. If the camera makers adopted a standard file format that could be opened in standard applications (kinda like DNG) then tis problem would be mitigated. You really should place the lion's share of the problem at the feet of the camera companies...

  • Why does my IPad say "sending the message content to the server failed

    Why does my IPad say "sending the message content to the server failed"  I have checked the wi-fi connection and everything is fine and the email addresses are correct so what's wrong

    Is it an ordinary mail without attachments and links in the body of the email? If so, try deleting the email accountb and setting it up again.

  • Why does excel automatically load when i switch on my iMac

    Why does excel automatically load when i switch on my imac

    Please don't post in the PPC forum unless you are using a PPC machine.
    Dealing With The Resume Feature of Lion
    Managing Mac OS X Lion's application resume feature.
    If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
    It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
    If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
    chflags nohidden ~/Library
    Press RETURN. Quit the Terminal application.
    In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
    Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
    The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

  • Why does a form automatically close? Is there a way I can prevent this from happening?

    Why does a form automatically close? Is there a way I can prevent this from happening and keep it 'Open'?

    The form will close automatically when you do changes that can affect the form fillers. Sorry there is nothing you can do beside explicitly open the form after your changes.
    Gen

  • Why does my iPad keep losing the wifi every few minutes?

    Why does my iPad keep losing the wireless connection every few minutes?

    Could be
    1 the routers firmware require an Update
    2 the iPad is defect

  • Why does my ipad drop off the Internet frequently?

    Why does my ipad drop ff the Internet frequently? It will be going fine then just won't connect

    Could be interference from something near you like a cordless phone, etc.

  • Why does I can't install the FORM6I DEMO program

    Hi :
    Why does I can't install the FORM6I DEMO program?
    Environment:WINDOWS98 ORACLE 817 single machine version FROM6i
    The FORM6i installs in the :D:\ FORM60
    The ORACLE817 installs in the D:\ORACLE 817
    While installing the DEMO, always hint is not an ORACLEHOME catalogue, two catalogues can't all install.
    Please the help!

    Hi Mountain Matt,
    Please make sure that you're logged in as an administrator, and that any antivirus software on your system is disabled. Then, trying downloading Acrobat from Download Acrobat products | Standard, Pro | XI, X, and run the installer.
    Please let us know how it goes. If you're still having trouble and need additional help, it will be very helpful to know what version of Windows you're using.
    Best,
    Sara

  • Why does my image not reach the edges of the page when printed, but appears fine as pdf?

    Why does my image not reach the edges of the page when printed, but appears fine as pdf?

    Check a printable area of your printer.
    Make a (grey) rectangle that is larger than the paper size. Print it,
    you'll get a message that some cropping will occur, that's okay. Then take a
    ruler and measure the dimensions of the rectangle printed on the paper or
    the white borders around the printed rectangle.

  • TS1398 Why does my iPad2 not display the WiFi icon?

    Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

    Try the following:
    1. Reset the AirPlay devices
    2. Reboot the router
    3. Reboot the iPad
    Note: The AirPlay icon is now in the Control Center

Maybe you are looking for