Why does my group header keep repeating?

Hi,
I can't figure this out.  My group header appears on the first page as it should.  It doesn't appear on the second page.  Then it appears on the third page and all subsequent pages for that group.
In my example group #1 is the invoiceID.  For each invoiceID, there would be some header information that should display on the first page of that invoice.  Then come the details. 
For some reason, the invoice header information keeps reappearing on every page of that invoice as the details continue along the bottom.
I have no formulas set up for my group header.  The group itself is the same.  There is enough room for the group header on the first page, and it doesn't seem to matter what boxes I check and uncheck; I get the same result.  Any ideas on what might have been done to cause this?
Thanks
Edited by: plynch on Feb 21, 2012 5:04 PM

Hi,
So, the Group Header (for the same group) appears on every page except for the 2nd page. Which means you've got the 'Repeat Group Header' on each page' option ON under Group Options.
Why it doesn't come on the 2nd page? Could you check if you've got a conditional suppression formula on the Group Header. Go to Section Expert > Group Header > check if you have formula under 'Suppress'.
-Abhilash

Similar Messages

  • Why does playlist on iPod keep repeating and repeating even though play count rule is 1

    Hello, everyone!
    I have a smart playlist of about 100 songs.  The play count rule is set to play songs with a play count of less than 1.  A few days ago, I reset all of the songs play count to 0.  If you ask me, the way I have it set up, when the iPod is playing with my headphones on, the iPod should automatically update each songs play count to 1 after each song plays.  After I have listened to all 100 songs, the playlist on the iPod should be empty.  The reason is is because since each song was updated from their play count of 0 to 1 after each one played the play count rule in the playlist should show no songs in the playlist.  Like I said before, the rule says to play any songs with a play count of less than 1.  Since all of the play count of the 100 songs are now 1 and not less than 1, the playlist should be empty.
    The problem is, when I'm listening to my iPod and the 100 songs have played, the playlist is not empty.  It just keeps repeating songs and it will never stop.  When I go to iTunes, the songs are randomly with play counts of 3 or 2 or 1 or however many times they have been repeated.
    Does anyone know why this is?

    The reason the songs don't delete themselves after playing from the playlist on the iPod is because your iPod is not smart enough to do that. It's only when you re-sync your iPod to your iTunes library does the smart playlist in your iTunes library delete the played songs. Then the playlist on your iPod will adjust to the number left unplayed in that playlist.
    So as long as you don't sync back to your library the number of songs in that playlist will never reduce to zero.
    CDJunkie

  • Why does my iPod touch keep repeating the same song?

    Since I loaded the software update 4.1 my music keeps replaying one song unless I choose to shuffle. What have I done?

    Hello jennysipod,
    And welcome to Apple Discussions!
    Make sure you don't have your iPod set to repeat one song. While one song is playing, tap the artwork to bring up additional controls. You'll see a icon below the scrubber on right side that probably has a 1 on it. Tap it to change the setting to something else such as off.
    B-rock

  • Why does my ipad 2 keep turning on and off?

    Why does my ipad 2 keep shutting off only to restart and repeat?

    It basically works as if nothings wrong, until about a minute into using it it turns off then retarts and repeat....

  • Why does my Adobe Audition keep crashing on my MacBook Pro?

    Why does my Adobe Audition keep crashing on my MacBook Pro?  I've updated everything, and there are no other issues.  It is OS X and Audition CS6.  When I'm mixing a track, it will just shut down with a crash notice.  Very frustrating.

    Hi,
    What is the crash notice you receive?  OS X is very good about keeping extensive, detailed crash logs.  If you launch Applications > Utilities > Console.app  and open the "User Diagnostic Reports" group on the left, can you drag the most recent Audition crash report into an e-mail to [email protected] ?  The contents of that file should make it more clear to us why Audiiton or the OS thinks a crash is happening and will help focus troubleshooting.

  • What is application memory and why does my macbook pro keep running out of it?

    what is application memory and why does my macbook pro keep running out of it?

    There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
              A long-running process with a memory leak (a kind of bug)
              Not enough memory for your usage pattern
    Please note that if the cause is a memory leak, installing more memory will not help. That's likely if you already have more than 4 GB of memory. Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
    These instructions are for OS X 10.9 and later. Some details may be slightly different for earlier versions of OS X.
    When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
              View ▹ Columns ▹ Real Memory
    from the menu bar.
    If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
    The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
    Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, reset the printing system. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
    "Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
    If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
    The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
    sudo leaks -nocontext -nostacks process | grep total
    where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

  • Why does my wi-fi keep changing

    why does my wi-fi keep changing

    Changing into what? You need to give more information about the problem.
    How are you connected to the net, describe what's happening. Hopefully then somebody might have some ideas.

  • Why does my wi-fi keep changing channels

    why does my wi-fi keep changing channels?

    the channel is chosen by the WiFi router. If you don't want changes for whatever reason, set it in the router as manual and set the channel you want.

  • Why does my iPad2 suddenly keep losing connection on facetime?

    Why does my iPad2 suddenly keep losing connection on FaceTime and tries to constantly reconnect?

    Does it happen anywhere that you use FaceTime or only in your home WiFi network? If it happens with your home network, have you tried power cycling your router? Unplug it for about 30 seconds and then plug it back in.
    Turn WiFi off and on in the settings. Reset the network settings.
    Have you tried any troubleshooting steps at all?

  • Why does my FaceTime connection keep dropping?

    Why does my FaceTime connection keep dropping?

    Here's the update I promised. Hope it helps.
    http://support.apple.com/kb/TS5419

  • Why does my volumne button keep going off?

    Why does my volumne button keep going off?

    Hard to comment with no information.
    It will make it easier to help you w/ your problem to know the exact model, size, year built, RAM installed and OS you're running.

  • Why does my lap top keep turning itself off?

    why does my lap top keep turning itself off?

    Some details will help like does it do this when the power adapter is plugged in. Also what model and year computer are you using?

  • Why does my airport express keep cutting out?

    Why does my airport express keep cutting out?

    I have a 1st gen Airport Express and use it to stream music from my PC, iPhone 4, iPad and iPod Touch. My Airport Express is connected to a Teac UD-H01 DAC via an optical cable which is connected to an amp and speakers. I had no problems at all with this set up until I upgraded the Airport Express firmware to 7.6.3. The sound then started to drop out frequently. To cut a long story short after various testing, the problem had to be the Airport Express. I called Apple support but they were not much help and couldn't fix the problem and said they would speak to engineering and phone back. While I was waiting I decided to have another go to find the problem and opened the airport utility and saw that there was an option to downgrade the firmware. At this point I realised that the problems started about the same time that I upgraded the firmware to 7.6.3 but didn't think at the time that Apple would release a firmware that didn't work. Anyway I downgraded to 7.6.1 and hey presto, everything worked again. A couple of days ago I noticed that firmware 7.6.4 was available and thought I'd give it a go, not good - same problem as 7.6.3. I've downgraded to 7.6.1 again and all is well. Hope this helps.

  • Why does Acrobat X CS6 keep asking for a license number?

    Why does Acrobat X CS6 keep asking for a license number? When I enter it, it's declined. I have the suite from school and loading it at home as allowed as the teacher.

    Contact S&T support if you have specific issues.
    Mylenium

  • Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

    Why does my Macbook Pro keep shutting down during installation of OSX Mountain Lion?

    Hmm, good luck then!
    I'm pretty much exactly on the opposite side of the planet, but I've been to Vermont and remember its rural beauty well. However, I can't imagine you having the only Internet connection within a reasonable radius (where "neighbors" hanging off the same ISP don't count). Uh, that note only if your wired connection to the router produces no good result, either...

Maybe you are looking for