Why does my guestbook iframed into my site look like this!?

I cannot drag it out so it looks good.
Thankful for any help!
/the novice

Guestbooks are usually separate from websites. It shouldn't be a problem, basically because:
- A Guestbook should be the last place before a visitor goes to before they leave the site anyway
- You can configure your Guestbook to have a link back to your main website.
Frames are generally a bad idea anyway. They are not valid code and not compatible with all browsers. Plus you don't have much control. If your guestbook provider decides to put ads on your guestbook or the page is down, it looks bad.

Similar Messages

  • Why do my router configuration site look like this?

    Why do my router configuration site look like this:

    it may be corrupted... try downloading a new firmware for your linksys router using this site... http://linksys.com/downloads and choose the model and version of the router that your using... also try turning the firewalls off... that would help
    ♥ Registered TradeMark Since 1987 ♥

  • Why does some of my text come up looking like water was spilled on it

    just typing in my name and password the instruction text under the boxes look like you spilled water on them. some time you can highlight the word and just click and it goes to normal. If you don't have any idea what it is suppose to say it is very hard to read. I have done the reset on firefox and that didn't do a thing for it.
    running windows 7 pro 64 , 3.2 mz hp computer

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

    why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

    Probably Spotlight is indexing your HD? To stop this indexing, have a look here:
    http://www.thexlab.com/faqs/stopspotlightindex.html
    marek

  • Why does my web page, created on iWeb, look correct on Safari but has thick black lines all over it in Firefox?

    Why does my web page, created on iWeb, look correct on Safari but has thick black lines all over it in Firefox?

    What's the URL of your site so we can examine it first hand?  I assume those black lines are around photos or objects that have had a frame or drop shadow added to it, right?  If so that's a known issue. 
    There's a workaround for that in this tutorial: #7 - Converting Photos w/Frames, Drop Shadows and/or Reflections into a Single Image File.  That should get rid of those black lines/boxes.
    OT

  • Why does my terminal prompt look like this?

    Today I noticed that my Terminal prompt now looks like this:
    *pranaymishra:~ tbarth$*
    Any idea how that happened? There's nothing in the .profile that does this.
    -Travis

    The computer name is 'Travis', and always has been.
    Hmmm...
    Further investigating shows a computer by that name on the network with a different IP address. The DHCP server shows my IP address as associated with my computer name, 'Travis'.
    So could this be an OS X network error where it's picking up the computer name from something like WINS or DNS and not updating it if the IP lease changes? And if so, why does it not simply use the given name specified by the user instead?
    As far as the network is concerned, my computer name is 'Travis', as it should be.
    -Travis
    EDIT: BTW, 'Use dynamic global host name' is not enabled.
    Message was edited by: Travis B

  • Why does apple stop giving updates? To phones like iphone 4?

    Why does apple stop giving updates? To phones like iphone 4?

    Apple haven't stopped giving updates to the iPhone 4. The fact that an update has just been released only for the iPhone 5 does not imply this.

  • Ever since I installed IOS7, my Iphone 5 has always opened with a message that I have given an incorrect voicemail password.   I have never put in a voicemail password, so I cannot get into the site to correct this.   Any suggestions?

    Ever since I installed IOS7, my Iphone 5 (10 months old) has always opened with a message that my voicemail password is incorrect.    But I've never at any time put in a voicemail password, so I can't get into the site to put this right, and it didn't happen before I installed IOS7.  The message goes away as soon as I cancel it, but it's very irritating.  Any suggestions?

    Call your carrier & have them reset your voicemail, then set things up again. Most carriers require a password for voicemail.

  • I don't understand why ePrint does not work on emailing photos - Discard - Looked like a spam/ virus

    I don't understand why ePrint does not work on emailing photos - Discard - Looked like a spam/ virus

    Thanks. The problem was solved when I inserted a word in the subject line. Previously I was keeping it blank.

  • My ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i need help!!!

    my ipod has a black screen with a loading symbol (its moving) i cant turn it off or plug it into itunes its been like this for about 3.5 hours. i tried to do a system reset it after a glitched download. but while it was reseting it got stuck ot a black loading screen.
                                                                                               PLEASE HELP ME !!!!!!!!

    The article helped me a bit but it doesnt help me totally because the buttons dont work and i cannot connect to itunes (itunes does not sense my ipod when plugged in) so im thinking to just let the battery uncharge...
                                                                 but when it went down i was fully charged
                                                                                  (im very unpatient)

  • Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

    Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
    running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
    and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
    broke this application. Help!!

    Hi,
    It seems there is nothing to do with IE mode.
    Please make sure your link still can be accessed.
    The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
    For more infromation,please check link below:
    http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • In RGB mode, why does pasting 50% gray into a layer mask actually put K 59% in the mask?

    Create a new (small) document in RBG mode, 8 bit, transparent background.
    Fill the resulting Layer 1 with 50% gray, 100% opacity.  The eyedropper reports RGB=(128,128,128).
    Copy the layer to the clipboard.
    Create a new Layer 2. Fill it with Green #00ff00 (the contents don't actually matter here).
    Add a layer mask to Layer 2.
    Bring that mask up for editing.
    Paste in the contents of the clipboard.  The eyedropper reports the contents of the mask as K 59%.
    I was expecting 50% gray (or K 50%). Why did I get K 59%?
    Addenda:
    I'm using CS3 on a Mac. I haven't had a chance to see if the same thing happens with more current versions of PS.
    Apply the layer mask in Layer 2. Extract the transparency to a new layer.  The eyedropper gives the RGB of the
      new layer as (106,106,106), with variations pixel by pixel of plus/minus 1.
    Take the Difference between that new layer and Layer 1; the eyedropper gives the RGB of the difference as (22,22,22),
      again with variations of plus/minus 1.
    Paste the contents of the clipboard into a new layer.  The eyedropper gives the RGB contents of that new
      layer as (128,128,128), both without and with a Black & White adjustment applied.
    Create a new layer, add a layer mask, fill the mask with 50% gray. The eyedropper gives the contents of
      the new mask as (128,128,128) (now as expected).
    The 50% gray used above is just for simplicity. I'm actually interested in inserting a complicated RGB
      image containing only shades of gray into the layer mask. This example indicates that pasting won't
      preserve the gray levels. Indeed, when I replace the initial 50% gray with a Black to White gradient,
      the differences between the initial gradient and the one in the mask range roughly quadratically from 0 at 0,
      22 at 128, and 0 at 255.

    Thanks. First doing Edit > Color Settings, Gray > Gray Gamma 2.2 resulted in putting 50% gray in the layer mask.
    Does changing the Gray setting have any effect on channel calculations, via Image > Calculations?
    Or what you get from
    Image > Apply Image, Channel > Transparency ?
    I don't see "sGray" listed among the options for Gray in the Color Settings. Is it somewhere else?

  • Why does pasting multiple layers into a different comp ruin the order?

    I have 6 layers in a comp, and I'm taking them across, via copy/paste, to another comp.  Each second layer is an Alpha channel for the one below it.  However when they're pasted into the next comp they ALWAYS are reversed, or randomly resorted, ruining everything about their blends and alpha relationships with one another.
    Why does After Effects do this? Is there a way to prevent it from happening?
    This doesn't just happen in this instance, I've noticed it nearly always happening when pasting multiple layers. 
    Is there ANY conceivable benefit to this happening, ever? 

    Layers are pasted in the order they are selected. Select the top layer first then shift select the bottom and they will paste in the same order. Select the bottom layer first and then shift select the top and the layer order will be reversed. Ctrl/Cmnd + select layers in any order and they will be pasted in that order.
    Lets assume you have layers in this order. Red, White, Blue.
    Select Red then shift select Blue, copy and paste and you'll get Red White Blue.
    Selec Blue then shift select Red, copy and paste and you'll get Blue White Red.
    Ctrl/Cmnd + select White, Red, and Bluae, copy and paste and yo'll get White Red Blue

  • HT4528 why does plugging iphone 4 into PC thru USB disable computers wireless adapter?

    why does plugging in iphone 4 to PC it is authorized on cause the computers wireless adapter to shutdown? Don't recall changing anything on either one, but did do some updates on windows update.

    You probably would get better answers to this on a Microsoft Windows forum...the iPhone should notbe doing anything to affect the operation of Windows as it does not communicate with the operating system.
    Have you checked the Network Control Panel to see if anything has been changed due to the Windows updates you installed?  Something in the updates must have changed the network settings or network card settings.

  • Why does iPhoto automatically split into 2 departments & how to access old?

    I downloaded the photos from my laptop to my desktop and when I merged them it forced me to create "iPhoto2" which is where all my new pics go now. However I can only view my old pics as I scroll thru them in the backup drive! Apple is so inventive I'm sure I'm just missing something...help!!

    I placed my file from my laptop over my current photo file to transfer it...probably the problem.
    Yes. Doing that you imported the original, modified, thumbnail and faces image files into your other library. That's not the way to do it.
    If yo have a backup copy of the library on your EHD get it and replace the "combined" one and name it something other than iPhoto Library. Then just drag the library from the laptop to the EHD.
    You won't be able to merger then and keep metadata, faces, places or keywords until iPhoto Library Manager is updated to be compatible with iPhoto 11. That might be sometime next week hopefully.
    If you don't care about the keywords, places, etc you can use iPhotoSync
    iPhotoSync to just copy the photos in your laptop library into the EHD library.
    This is how it would be done:
    1 - open your laptop library.
    2 - using Fast User Switching go to a second user account and use iPhoto to open the library on the EHD.
    3 - now you can use iPS to move the photos from the laptop library into the EHD library. iPhoto will ask you if you want to exclude duplicates so select yes for all dups.
    Remember this method will NOT include keywords, places, etc. an may create multiple Events or just one large Event with all the photos. I'm not sure which.

Maybe you are looking for