Why does my hp d7260 printer spit out a blank page each time one is printed?
Often the printer will print out the desired page and than a eject the next page (blank with no intention of printing on it). It will have a blank page between each multipage printing. It always does this on printing from my wife's computer and sometimes from mine. The printer is connected to our home network. I am using xp and my wife is using vista. I haven't kpet track of every incident from my computer but usually printing something from my browser. I run the paper through again so it is not a waste but just a pain.
Thanks George
This sounds like an issue that could result from having A4 sized paper but having the printer settings set for A size. Please check the paper settings.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
My printer is printing the page and approximately 10 seconds later spits out a blank page. When I am printing multiple copies they print and then there is a blank second page. I have HP paper. By the way my printer is only 3 weeks old. I have cleaned the rollers, no paper jam...Started out of the blue. I have tried printing current page only....printing selection only...this is a pain and I expect more out of a new product. Was in love with it until now. I cannot even make it print a test page from the control panel.
Welcome to the HP Community , I noticed your post about your Officejet 6100 now printing out blank pages after changing the ink cartridges, and wanted to reach out to you with my own suggestions. I would say to have a look at the guide below and try the troubleshooting steps to see if they can clear up the blank page printing concern. You can also power reset the printer and make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power. If the issue continues, please contact HP directly to see about a replacement printer if the printer is still under warranty, and if not, perhaps they may have a trade in option. Troubleshooting guide: HP Officejet 6100 ePrinter Series (H611) - Troubleshooting Print Quality Issues Reset Instructions:Turn the printer on.
With the printer turned on, disconnect the power cord from the rear of the unit.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the unit.
If the printer does not turn on by itself, press the Power button to turn it on. If you need to reach HP, here is their contact information:Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear. Best wishes to you!Show thanks for my reply to help you today by hitting the "thumbs up" icon below! -
My 3 week old printer is printing the page and then 10 seconds later spitting out a blank page. I have tried printing current page, current selection. It does this on envelopes. I have HP paper.....taken paper out....moved the guides. Cannot print a test page from the panel....I have press the x it just cancels the selection.
Sorry forgot the link http://support.apple.com/kb/ht1341
-
Printing from firefox spits out extra blank page
When I print from Firefox my printer firsts spits out a blank page before printing what was expected.
I have a similar issue -- a page before is printed and after the actual document.
yes -- the blank page appears in preview. I was able to get rid of the first one with this CSS:
@media print {
body * { float: none !important; }
But I still get the blank page afterwards.
Not sure why, but I'll let you know if I find anything else -
Mpc2500/dsc525 spitting out multiple blank pages
I've a mac mini running mavericks 10.9.4. I've a Gestetner MPC2500/DSc525 printer. When I attempt to print something the printer merely spits out mostly blank pages. some of the pages contain random lettering and numbers and special characters. But there is nothing resembling the document I'm trying to print. The printer will run until every last piece of paper has fed through the printer.
I've deleted the printer and added it again multiple times attempting to use different drivers. I've installed using the drivers that were included on a disk, but I didn't really think that would work since it looks like the drivers were written in 2005. I've gone to linuxfoundation.org and downloaded drivers from there, but when I tried to install them when installing the printer through the add printers dialogue, it won't allow me to select drivers that I've downloaded. I've read on the apple site that this printer is supported and that the drivers are available. It does appear that the drivers are available on my mac because on a few of my setup attempts I chose the select software option and in the list of available printer software was the model and number referenced in subject line of this post. However, no matter how many times I do this, I always get the same result; multiple blank pages.
I've worked on this on and off for a month with no result. I'me having to send documents to co-workers to ask them to print for me. Any help would be appreciated.
HughI would agree with greg about trying the Generic PCL drivers. Those will only give you black and white though.
In reading through your post, I don't think you actually installed the driver packages (pxlmono, Foomatic-RIP, Ghostscript) from the linuxfoundation.org site. Many, many users get confused when there are software installers and disk images. The very short version of the procedure is to temporarily disable Gatekeeper in the Security System Preferences. Then double-click on each of the disk image (.dmg) files. This will mount a pseudo disk that contains an installer. Double click on the installer package to install the software. It might be worth a look at http://www.howtogeek.com/177619/how-to-install-applications-on-a-mac-everything- you-need-to-know/ for a description of the various ways Mac software is distributed and installed.
Once the software from linuxfoundation.org is installed, you should not have to point the Printer & Scanners pane to any software. You should easily be able to see the Gestetner MPC2500/DSc525 PXL driver. -
I have HP Photosmart Premium. Everytime I do a print job my printer spits out extra paper. Sometime it says something Like Page 2 of 2 and other time it is just blank , Some of the pages have a gray line across the bottom. I try to reuse what I can, but would like to know how to stop this.
Typically this is an error in the software connection with the printer. However, one can test this to narrow the issue down by printing a self test page or by making a copy with the printer. If the unit produces no extra pages, then most likely it is coming from the computer.
If you are USB connected, then I would advise unplugging the USB cable to the printer and restarting the PC. While the PC is restarting, I would advise performing a Hard Reset to the printer.
* Unplug printer while powered on
* Unplug other end of power cord from wall outlet
* Wait 30 seconds
* Plug unit back in for power
There is also a document with steps to troubleshoot when a printer is producing blank sheets of paper. To access the document, click here. Let me know how it goes.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
Pixma 410 prints one page {as wanted} then spits out 7 blank pages Why ??
This happens when i use page setup in print preview to resize the image.
Print dialog box indicates all pages as selected
Not able to make any other selection. Display of print que shows 8 pages to print. One page of image is printed,
(as wanted} followed by 7 blank pages. ?? HelpHello LRK.
The issue may be related to the document or program that you are currently attempting to print from.
If you are printing from the web, you may experience a cut off depending on how the page was formatted.
To resolve this issue, please check to see if a 'Print' option is available inside or around the article or email you wish to print. This should properly format the page for printing.
If you continue to have difficulties, please copy the text and then paste it into your desired word processing program for printing.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Mx 410 prints one page {as wanted} then spits out 7 blank pages Why ??
This happens when i use page setup in print preview to resize the image.
Print dialog box indicates all pages as selected
Not able to make any other selection. Display of print que shows 8 pages to print. One page of image is printed,
(as wanted} followed by 7 blank pages. ?? HelpHello LRK.
The issue may be related to the document or program that you are currently attempting to print from.
If you are printing from the web, you may experience a cut off depending on how the page was formatted.
To resolve this issue, please check to see if a 'Print' option is available inside or around the article or email you wish to print. This should properly format the page for printing.
If you continue to have difficulties, please copy the text and then paste it into your desired word processing program for printing.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
HP 7310 spits out multiple blank sheets after copy and/or print
After I print or copy anything on my 7310 all-in-one it continues to spit out blank sheets of paper. I've reset the printer, searched for a software upgrade, checked the settings and everything seems to be normal.
Any suggestions?
ThanksWhat happens if you insert a black cartridge instead of the photo cartridge and then try to print?
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee. -
Why does my cd player keep spitting out cds?
everytime i put a cd into my macbook pro it sounds like its reading it and then spits it out. ive tried restarting it and it is fully updated.
I had this problem today. Called Apple. They were extremely helpful. Sent me the following link--it fixed the problem immediately.
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Hope it helps you too. -
My printer spits out a blank sheet using Firefox but prints correctly using Safari.
Using a laptop with Vista, printing to hp 5100 works with Explorer or Firefox 3.6.6 but with my eMac OS X 10.5.8 only Safari prints - Firefox 3.6.6 gives a blank sheet!!
== Shortly after upgrade from 3.6.4 but I downloaded 3.6.4 again and I still had the same problem so I downloaded 3.6.6 and I can,t print data - preview openp Adobe Reader which shows a blank!!Printing a web page
* https://support.mozilla.com/en-US/kb/Printing%20a%20web%20page
Firefox prints incorrectly
* https://support.mozilla.com/en-US/kb/Firefox%20prints%20incorrectly
Problems printing web pages
* http://kb.mozillazine.org/Problems_printing_web_pages
Check and tell if its working. -
Why does an e-mail PDF open as black blank page?
I received an e-mail with a PDF attached; when I click on it, it opens briefly to show a legitimate page, then "dissolves" into total black and I can't get pages to show again. I have an i-mac running OSX-5 without intel. It seems this happened after I upgraded; since I could not locate system requirements, I assumed that the automatic notification made the automatic download "safe". Would really like to view the attachment on this computer. Also, the PDF switches to Safari rather than Adobe to open the document. In fact, I notice that as I write, this is in Safari, rather than the Adobe Web site where I started. Perhaps someone can help me clean up my operation. Should I trash the Adobe presently running and go to a lower number? I currently am using Adobe 9. I am also not particularly computer smart, so please be patient with me.
Hi
It shows just 4 always as an option in the "open with" lsit. Also I haven't downloaded any apps for a while so why would it start now?
Do you know how I can estabilsh how many apps are counting toward this 10 and what they are? -
Why does the status installation steps go off for 5 minutes each time my pc reboots?
HP Officejet 4500 via Window 7 64-bit OS was installed about 6 weeks ago and ever since then the symptome described in subject line occurs. Please advise as this is extremely annoying .
It is possible that the printer software did not get completely installed on the initial attempt. I would suggest to uninstall the software, download the software from hp.com and then reinstall it. Take note of any error message that came up.
Binary_Zen (worked at HP )
Click the white Kudos star to say thanks
Please mark Accept As Solution if it solves your problem -
when i thy to print from firefox the printer spits out a blank sheet of paper. all other programs i print from work just fine including internet explorer.
== This happened ==
Every time Firefox opened
== when i installed firefox about a month agoSee this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page] -
HP printer spitting out extra pages
Anyone else experience this: When printing from the web, my HP printer spits out a bunch (say 3-4) of blank pages and then prints the page(s) that are specified.
(Apparently I'm full of printing issues lately...)
Any suggestions? It does it regardless of browser. (netscape, safari and foxfire)
Thanks!Not recently, but I can tell you that my Epson printer prints web pages perfectly. It's worth a shot, however, so I'll try it. Ya never know.
Maybe you are looking for
-
How do I deal with fraud resolution on my account?
I had 3 iphone 6 phones added to my account along with various add-ons. This occurred on 03/20/2015 and the fraud dept removed the phones, but now I am showing disconnection fees for 3 phones that I never owned on my new bill. Also, there is $249.
-
i have a macbook pro and use MS Office 2011. In Outlook 2011, i have noticed a strange phenomenon. In some messages, although the attachment icon appears indicating presence of attachments, i am unable to actually see or access the attachments.
-
ITunes does not recognize password after removal of corrupt backup file
I removed a corrupt backup file of my iPhone 4 from iTunes and now it does not recognize my password anymore. The password is correct, as I wrote it down when I set it up and have used it before. Any thoughts? This must be some kind of flaw in iTunes
-
IPod wont keep anymore songs on it, and plenty of memory is left
I can either download music or rip it from a cd, and my iPod says they are on the iPod when it is in iTunes, then when i eject my iPod it doesn't have any of the music i just put on there... what is the problem anybody??? its a 30g iPod video
-
ATP check before delivery creation
Gurus, Is there any way of confirming stock in sales order or scheduling agreement by some user exit before we create the delivery. For example i have one sales order with quantity of 10. I have 10 pieces in stock but not confirmed in sales order yet