Why does my I phone 3gs say my memory is low and how do I fix it

My I phone 3GS says my memory is low when I'm searching web.
I have plenty of space on phone but it keeps saying I'm low on memory

Memory is the RAM, not the Storage space, you're thinking of the Storage space that gets used up when you download a movie or something, the notification is about the RAM, which is used to temporarily store information so it can be accesses faster, the iPhone 3GS has 512 MB of RAM, my iPhone 4 has been saying that now and then since I updated to iOS 5, so it's been a while.
I don't think there is anything you can do about it, except for closing apps, by double tapping the home button and tapping and holding on an app to enable wiggle mode, then tapping the red button to close them. This frees up memory, which should prevent the notification and may even speed up other things on your iPhone.

Similar Messages

  • Why does my 10GB iSCSI setup seem see such high latency and how can I fix it?

    I have a iscsi server setup with the following configuration
    Dell R510
    Perc H700 Raid controller
    Windows Server 2012 R2
    Intel Ethernet X520 10Gb
    12 near line SAS drives
    I have tried both Starwind and the built in Server 2012 iscsi software but see similar results.  I am currently running the latest version of starwinds free
    iscsi server.
    I have connected it to a HP 8212 10Gb port which is also connected via 10Gb to our vmware servers.  I have a dedicated vlan just for iscsi and have enabled
    jumbo frames on the vlan.
    I frequently see very high latency on my iscsi storage.  So much so that it can timeout or hang vmware.  I am not sure why.  I can run IOmeter and
    get some pretty decent results.
    I am trying to determine why I see such high latency 100'ms.  It doesn't seem to always happen, but several times throughout the day, vmware is complaining
    about the latency of the datastore.  I have a 10Gb iscsi connection between the servers.  I wouldn't expect the disks to be able to max that out.  The highest I could see when running IO meter was around 5Gb.  I also don't see much load
    at all on the iscsi server when I see the high latency.  It seems network related, but I am not sure what settings I could check.  The 10Gb connect should be plenty as I said and it is no where near maxing that out.
    Any thoughts about any configuration changes I could make to my vmware enviroment, network card settings or any ideas on where I can troubleshoot this.  I
    am not able to find what is causing it.  I reference this document and for changes to my iscsi settings 
    http://en.community.dell.com/techcenter/extras/m/white_papers/20403565.aspx
    Thank you for your time.

    I have a iscsi server setup with the following configuration
    Dell R510
    Perc H700 Raid controller
    Windows Server 2012 R2
    Intel Ethernet X520 10Gb
    12 near line SAS drives
    I have tried both Starwind and the built in Server 2012 iscsi software but see similar results.  I am currently running the latest version of starwinds free
    iscsi server.
    I have connected it to a HP 8212 10Gb port which is also connected via 10Gb to our vmware servers.  I have a dedicated vlan just for iscsi and have enabled
    jumbo frames on the vlan.
    I frequently see very high latency on my iscsi storage.  So much so that it can timeout or hang vmware.  I am not sure why.  I can run IOmeter and
    get some pretty decent results.
    I am trying to determine why I see such high latency 100'ms.  It doesn't seem to always happen, but several times throughout the day, vmware is complaining
    about the latency of the datastore.  I have a 10Gb iscsi connection between the servers.  I wouldn't expect the disks to be able to max that out.  The highest I could see when running IO meter was around 5Gb.  I also don't see much load
    at all on the iscsi server when I see the high latency.  It seems network related, but I am not sure what settings I could check.  The 10Gb connect should be plenty as I said and it is no where near maxing that out.
    Any thoughts about any configuration changes I could make to my vmware enviroment, network card settings or any ideas on where I can troubleshoot this.  I
    am not able to find what is causing it.  I reference this document and for changes to my iscsi settings 
    http://en.community.dell.com/techcenter/extras/m/white_papers/20403565.aspx
    Thank you for your time.
    If both StarWind and MSFT target show the same numbers I can guess it's network configuration issue. Anything higher then 30 ms is a nightmare :( Did you properly tune your network stacks? What numbers (x-put and latency) you get for raw TCP numbers (NTtcp
    and Iperf are handy to show)?
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • Why does my mrs phone keep getting my contacts from iCloud and more importantly how do i stop it!?

    Hey guys an gals sorry if this has been asked 100's times before but...
    Why does my mrs phone keep getting my contacts from iCloud and more importantly how do i stop it!?
    Thanks for your help :-)

    Thanks for you reply, she already has her own account and wants to back her own contacts up to the cloud, we have tried turning both contacts off in icloud settings, also deleting from phone when prompted, then, we also deleted all her icloud backups to start a fresh. However soon as she turns contacts back on.. Bam they re appear. We also have ipad in the mix so we did the same to that, turned off and deleted contacts on there also to no avail. Somehow they are linked to my acount just cant work out how or where?

  • Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

    Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

    I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
    I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
    I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
    Can't wait to see what happens tomorrow.

  • Why does my computer say unable to initialize tubesock and how do i fix it?

    how do i fix it when my computer says unable to intialize tubesock?

    Slightly 'over-done' web site, with floating popups etc.
    You should contact them and ask why their pages are not fully Safari compliant.

  • HT1751 every thing i download will not open on my phone it says cannot download at this time how do i fix this i have the Iphone 5

    I can download apps but once on my phone they will not open they say loading and than they say app cannot be downloaded at this time how do i fix this

    If I have to restore my iphone apple can give me a new one while they are at it

  • Why is my Bluetooth no available on my macbook pro? And how do I fix this problem?

    I am trying to access my bluetooth on my macbook pro, but when I click on the bluetooth symbol it has a squiggley line through it and say not available.  How can I fix this?  I already tried resetting the PRAM.  Please help!  Thanks!

    Do you have it set to ON in System Preferences>Bluetooth?

  • Why is iTunes saying my iPod is corrupted and how do I fix it?

    I got a new computer for work, downloaded iTunes and connected my iPod classic (20GB). I added a few songs to my library before I connected the iPod. Once connected, my iPod appeared but after trying to transfer music an error occured. iTunes stated my iPod was corrupted and it asked if I wanted to reset it, which would wipe my iPod clean.
    I checked my Ipod's functionality and it was working fine. I tried connecting it to a couple other computers I use and it still worked fine. In the meantime, I uninstalled all of the iTunes programs and reinstalled everything. I connected the iPod again and the same problem occured.
    I do not think I transferred any corrupted songs onto my iPod; it has been working fine. I really do not want to erase my iPod and start from scratch unless that is the only solution. I am just not sure why my iPod is not working with this specific computer...it is brand new! When I connect the iPod now, it appears sometimes but it always ends the same. The computer also asks if I want to scan the E drive (the drive the iPod is connected to).
    Thoughts?

    +The computer also asks if I want to scan the E drive (the drive the iPod is connected to).+
    That it almost surely due to some security software/antivirus stuff that was installed by corporate.
    Ask your IT folks about getting itunes running on this PC and make sure it's allowed by your company.

  • Why does the windows pop up in adding add-ons mean and how to get rid of it

    This forum really really needs to be able to accept an image with the request.
    So here I go making an images workaround because the forum is defective
    [[Image:What does this mean]]

    It's no skin off your teeth? Ummm... I think you mean no skin off my nose, teeth don't have skin. Most of your sentences don't make sense, it takes some thinking to figure what you meant. As far as your issue, thanks for explaining it further (that information would have been perfect i the 1st post) that is what I assumed and even the thread i directed you to said it's normal for the windows box to open.
    You take wasting time poorly? I find that hard to believe, because you're spending a lot of time to give me a hard time, I didn't use language (care to point the words out?).

  • Why does my Macbook show it's the year 2554 BE? How can I fix it?

    My Macbook stopped showing the correct year. It shows that it is the year "2554 BE" I don't even know what BE stands for!
    The time, month, and day are all right but the year keeps bugging me!
    The text is in spanish but I guess we all get the same window.
    1) I tried changing the year but the lowest it can go is "2512 BE".
    2) I tried Reseting the time and date but it didn't work either.
    3) And I also tried setting the Time and Date to automatically change and took me back to "2554".
    What else can I do?
    P.S. My macbook is up to date. I have the Version 10.6.7
    I WOULD REALLY APPRECIATE YOUR HELP!!
    Message was edited by: Neymgm I guess this is a better way to read it.
    Message was edited by: Neymgm

    Hello,
    B.E = Time Format, used in most Asian Countries. Means Buddhist.
    Try and tick the "Set Date & Time Automatically Box". Set it to the appropriate setting.
    Where abouts did you buy your Mac from?

  • Why does my MacBook Pro screen have white marks on it and how do I get rid of it?

    My MacBook Pro started having these white marks right in the middle of the screen and I don't know how to get rid of it. I brought this MacBook online so I only have the invoice from seller. Is this sufficient evidence to show apple to replace under warranty?

    riaguo wrote:
    My MacBook Pro started having these white marks right in the middle of the screen and I don't know how to get rid of it. I brought this MacBook online so I only have the invoice from seller. Is this sufficient evidence to show apple to replace under warranty?
    you will have to bring it to apple so that they can determine that.

  • Why does a font substitution occur when I print a webpage? How can I fix it?

    When I print a webpage, a font substitution occurs. This happens no matter what printer I send the document to. It did not occur in previous versions of Firefox.

    Gabe,
    It sounds as though Pages is trying to resume editing a bad document, or a very large one. Quit Pages, Force Quit if necessary, and then start it up again while holding down the Shift key to prevent reopening formerly open documents.
    Jerry

  • Why am I not able to click on certain things anymore and how can I fix this?

    I am on fubar and I cannot rate people or open shoutboxes. I believe it is a flash or java issue. It worked before on firefox 3.6, but now that I upgraded it won't.

    yo! Give me an answer

  • Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50). Everytime I try to sync my phone?

    Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.

    What operating system do you have on your computer?

  • Why does my iPhone 4 always say "sync will resume when "... MacBook Pro" is available??? i can't seem to sync over wifi

    why does my iPhone 4 always say "sync will resume when "... MacBook Pro" is available??? i can't seem to sync over wifi

    Try the following:
    1. Connect the phone to your computer using the USB cable and let it sync.
    2. Uncheck "Sync with this iPhone over Wi-Fi"
    3. Click Apply
    4. Check "Sync with this iPhone over Wi-Fi"
    5. Click Apply
    6. Quit iTunes
    7. Disconnect the phone from the USB cable
    8. Make sure your phone is connected to your Wi-Fi network
    9. Open iTunes
    iTunes should see your iPhone and connect to it. Go under Settings > General > iTunes Wi-Fi Sync and see if you can initiate a sync.

Maybe you are looking for

  • PDF files won't open in Firefox (but they will in IE).

    I have Firefox set as my default browser, and I have Display PDF in Browser checked in Preferences in Acrobat. What am I doing wrong? I'm using Acrobat 9 Pro.

  • Dreamweaver Help | Edit an existing remote website

    This question was posted in response to the following article: http://helpx.adobe.com/dreamweaver/using/edit-existing-remote-website.html

  • How to create a task flow in webcenter?

    Hi There, I have a code fragment and that fragement is re-used across muliple pages in web center site. My requirment is to create a task flow based on this fragment. I found some links but all are referring w.r.t WebCenter Spaces, which I am not int

  • Standby Gives Error

    Hi I m facing an error on standby database(Physically) when i trying to open it in read only mode it gives error SQL> ALTER DATABASE OPEN READ ONLY; ALTER DATABASE OPEN READ ONLY ERROR at line 1: ORA-01092: ORACLE instance terminated. Disconnection f

  • Excel in Citrix environment

    Hi All, Does someone has experience with Excel 2013 in a Citrix environment? To be more specific, we must be able to save files as a char-s-v file. I did not say as .csv file because we must be able to use the pipe character "|" as delimiter. (Histor