Why does my ical have a red circel with the red letter i in it?

why does my ical have a red circel wiht a red i inside ?

Mike,
That means you have been invited to an event, or a shared calendar.
Calendar: Reply to an event or calendar invitation explains your options.

Similar Messages

  • Why does my clip have a higher quality in the viewer than the canvas?

    When I am editing, I have noticed that sometimes my images and clips have a drastically higher quality in the viewer than the canvas/timeline, what is causing this, and how do I edit and export my films with the highest quality possible?

    >Why does my clip have a higher quality in the viewer than the canvas?
    The answer is very simple; the Viewer shows the media at its native resolution while the Canvas shows the media at the Sequence resolution.  I'd bet that in your case, the original media is of higher resolution that the Sequence in the Timeline.
    -DH

  • Why does my aol mail not sync properly with the Droid Razr? Never had the problem with blackberry but now I deal with a great deal of spam & duplicating tasks

    Why does my aol mail not sync properly with the Droid Razr? Never had the problem with blackberry but now I deal with a great deal of spam & duplicating tasks

    This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
    So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

  • Why does my macbook pro often lose connection with the canon mx922?

    why does my macbook pro often lose connection with the canon mx922? This happened with the HP printer as well.

    This may answer your Bonjour questions:
    http://support.apple.com/kb/PH11449
    https://www.apple.com/support/bonjour/
    Ciao.

  • How many ipods do i have to go through with the red x?

    i have had 3 ipods in the past 6 months the recent one ive had for 3 weeks after getting it back ive sent in 3 ipods so far and getting tired of putting music and videos on it and having it end up with the red X. how many ipods do i have to go through before it wont break?
    Message was edited by: heytheredude878
    Message was edited by: heytheredude878

    You need to upgrade to Snow Leopard first. Contact Apple to buy a Snow Leopard installation DVD.
    Make sure your system meets Snow Leopard's requirements:
    Mac OS X v10.6 Snow Leopard system requirements
    To install Snow Leopard for the first time, you must have a Mac with:
    An Intel processor
    An internal or external DVD drive, or DVD or CD Sharing
    At least 1 GB of RAM (additional RAM is recommended)
    A built-in display or a display connected to an Apple-supplied video card supported by your computer
    At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools
    Once you have Snow Leopard, you can upgrade to whatever your MacBook will support.
    There is no need for sequential upgrades. The reason Snow Leopard is a prerequisite for further upgrades is that it includes the App Store. All OS versions subsequent to Snow Leopard are distributed that way.

  • Why does my Finder have two different languages in the Menu?

    Hi
    My Finder seems to be showing two different languages? Most of the menu items, like File, Edit, View, Go and Help are all in English (my preferred language under System Pref, International, Language). However, i am not exactly sure when (or what i did), but some of the menu items under Finder (Shutdown, Sleep, Restart etc.) and under Window (all of the menu items) were in a Chinese language.
    So i went to the System Pref, Internaltional, Language and unchecked them. So that only the English variants were selected. I restarted....and all it did was change the same menu items that were in Chinese to a Norwegian (????) type language.
    I have reinstalled my OS 10.4 and it was still the same. I then ran all the updates....and it was still the same.
    I have run the Optional Install on the OS 10.4 disk, and tried the Language Translators reinstalled....and still the same.
    Apart from formatting.....does anyone have any suggestions?

    Hi BDAqua
    I trashed the /Users/YourUserName/Library/Preferences/com.apple.finder.plist file ......rebooted....and it didn't fix the language issue in Finder.
    I then did as you suggested (show package contents) and found the file path System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    I then did a Get Info....but didn't see any language section tabs.
    When i Get Info on the System/Library/CoreServices/Finder.app
    I can see the language tab.....but it is all shaded out (i.e. i can't make any changes). I tried under the Ownership and Permissions tab to change the "Owner" section from System to My Name. However, this did not give me access to the language tab. I also tried to change the "Group" section to My Name (was on Wheel????). But i had no success in changing the language.
    Are there any other angles i could try?
    I have done quite an extensive search on the internet.....but haven't found anyone with the exact same issue. This was the closest... http://forums.macosxhints.com/archive/index.php/t-34796.html
    But i tried everything they suggested (except the format option). I haven't posted on any other forums yet either.
    Thanks again BDAqua for all your assistance!

  • Why does my imac have a question mark in the doc sayin start osx

    my imac has a question mark in my doc. on top of that question mark it say "start osx" how can i fix this

    Your images are "disconnected"
    that means they are not in the same place on your hard disk as they were when you imported them into Elements. There are a couple ways this can happen, mostly folks who use Windows to move images to a new location instead of Elements will run into this issue.
    To fix it, you either need to move them back using Windows, or Reconnect them using Elements.
    You didn't mention waht version you have, but it's done the same in all versions.
    Here is a link to the Help doc on how to Reconnect.
    http://help.adobe.com/en_US/PhotoshopElements/6.0/help.html?content=WSae2ea3b149d0c3591ae9 39f103860b3d59-7f68.html

  • Why does my google toolbar not work properly with the new updates. It was such a convenience to use the old toolbar to go to places I had visited before. Now I cannot get those old addresses with anything but Firefox 3.62 or whatever.

    Why does Google Toolbar not work with the newer versions of Firefox.

    Google have stopped supporting Google Toolbar on the latest versions of Firefox. Apparently one of the reasons for this decision is that modern browsers already tend to support many of the functions that google toolbar provides.
    Firefox does allow you to specifically bookmark sites you have chosen, and also automatically remembers many of the sites you visit.
    * see [[how do i use bookmarks]]

  • Why does my MacBook Pro not boot up with the Snow Leopard Disk?

    I have erased the entire hard drive on a 2011 macbook pro that had snow leopard on it. I was corrupted. I not insert my Snow Leopard Disk and the machine will not boot. I chose target mode to erase the hard drive from my mac book pro with Mt. Lion on it.
    Thank uou for any help,
    Ken

    Target mode?  Is there a second computer involved?  Why not insert the Snow Leopard disc in the computer on which you wish to install and hold down the C key to boot from it?
    If the disc came with a different computer it will not boot another model.  Retail discs also may not boot all model computers, even those that came with the same major version.  For example, some MBPs came with 10.6.6 but a retail disc may only be 10.6.3.

  • Why does my screen have a black background with all colours reveresed?

    I've been having a few problems with freezing in my CAD programme. Today I sort of stopped it but the screen image became all fragmented. I have restarted several times but now the desktop back ground is orange rather than blue & the icons are black. Is this an Nvidia problem & if so how can i fix it.
    thanks  AJ
    In pressing all they keys to try & unfreeze it I must have swithched it from black on white to whilte on black!

    whoops I just solved it! There is a white on black screen preference  but its not under Displays its under Universal Acess. V/relieved

  • Why does my iPad have yellow like spots on the screen when the screen is on dark images.?

    When I open dark images, my iPad has this yellow like spots around the screen next to the bezel.  It only happens when there is a dark screen like for instance when a YouTube video is loadeding or when I have dark pictures. Is this normal.? Or should I take it to the Apple Store.?

    first of all was your ipad dropped on a hard floor or something if not then you should just take it to apple as that is not normal you should probably get the device replaced

  • Why does adobe camera raw keep saving images with the incorrect white balance?

    I am having an issue when I edit images.  here is the scenerio:
    I choose 50 Raw files and open them in Camera Raw.
    I edit each individually - many of them have different white balances.
    Once I have each image how I want them, I select all and click done.
    Sometimes all the edits are saved correctly, but very often all the changes are saved correctly except white balance.  The program seems to take the white balance from one image and applies it to all the images.
    Why???  Very frustrating to have to go back and individually edit all the white balances again.
    Thanks!

    It seems to not happen if I slow down a few seconds before I click select all and then done.
    That should not be the problem, once you changed settings and hitting done they all should be applied immediately. It even is not needed to first select all, that is only needed when you need to open or save the files.
      But I still don't know why it would only change the white balance in every shot and not everything.
    If it happens again could you first in Bridge select one of the none changed files and with right mouse click menu choose select purge cache for selection?
    And can you provide more details about system version, app versions and file types?

  • Silly questions but new on apple, Q1 how do I cut and paste Q2 when I have a spelling error with the red line under it how do I correct it?

    Q1 How do I cut and paste
    Q2 how do I correct a spelling error when it has a red line under it?

    Lynnie2002 wrote:
    Q1 How do I cut and paste
    Highlight the item.
    Finder>Edit>Copy
    Place the item where you want to
    Finder>Edit>Paste
    There is 3rd party software that makes cut & paste easier with just 1 or 2 steps. 
    Q2 how do I correct a spelling error when it has a red line under it?
    You can find the correct spelling in the Apple dictionary.  Just add the correct spelling & delete the error.
    Care to share which OS you are using and which model iMac you have? 

  • Why does my original Apple ID not work with the support community?

    I've been signing in with the same Apple ID for at least four years.  My username on these forums is JayhawkCWE.  When I tried to sign on this morning, it told me I had to make a new account. When I entered my preferred ID (my forum handle, not the Apple ID), which is my original ID and the one that shows me all of my asked questions (which is the only reason I really care about this...), it says it's already taken.  I'm not senile, I know my Apple ID and I know I've been using it for years.  What gives?

    I will email you directly.

  • Why does my iPhone 6 Plus alert me with the wretched tri-tone for everything instead of the sounds I designate?

    In my settings, under Sounds, I assigned purposefully a tone for each type of alert. But none of them work. When I get a tweet alert, I hear the tri-tone. When I get a Facebook alert I hear a tri-tone. I hate the tri-tone! What do I need to do to get my iPhome to alert me with the tones i designate to each type of alert?

    Did you use those 3rd party apps on an older iPhone and restored the new iPhone from that backup? If yes, maybe reinstalling the apps will help.
    I had a similar problem changing the sound for Whatsapp, until I found that there are extra settings within the app.
    Did you try only one other sound or multiple options? Maybe only sounds from the time before iOS 8 are working with FB and Tweet.

Maybe you are looking for