Why does my illustration arrive with a white background?

After I've prepared a photo or illustration and place it into InDesign, it arrives with a white background. What must I do to change this?

TedWiden wrote:
... investigated the "options" box, but it doesn't offer "transparent background"
Really? It offers...
save as tiff (not flattened!) in PS - note Save Transparency box in bottom half of TIFF Options Dialog box. Now ID will 'recognize' your transparent background.

Similar Messages

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

HT4550 Why does my Safari open with American version and home page with Apple iPhone 5 advert even though I have changed them in preference

Why does my Safari open with American version, and home page with Apple iPhone 5 advert even though I have changed them in preferences, it happens every time no matter how many times I change them, when I open Safari its back to the USA and Apple home page.

Try this.
Hold the shift key down and launch Safari.
Best.

When I send a link why does my hotmail open with ie

When I send a link why does my hotmail open with ie
== This happened ==
Every time Firefox opened

Because Apple doesn't allow iTunes Store credit to be spent on any sort of gift. They haven't said why.
(99308)

Why does a VRRP master with preemption disabled regain master state after the reboot ?

Q: Why does a VRRP master with preemption disabled regain master state after the reboot?
A: This issue is found in the following scenarios:
1. When spanning tree is disabled on either of the VRRP controllers but enabled on upstream switch(es).
2. When the controller(any one VRRP controller) and upstream device(s) run different versions of STP.
3. STP convergence time is different across the VRRP controllers.
In these scenarios, rebooted vrrp master is expected to come back as vrrp MASTER as the link takes some time to converge and fail to receive VRRP advertisement packets from its peer and may roll back to MASTER.
Trigger for this is, since STP is enabled on intermediate switch and disabled on controller, switch is taking some time ~30 secs to converge the link while port on the controller has become UP and fail-over to Master due to
not receiving VRRP advertisement packets
In all these cases, it is advised to enable holdtime to mitigate issue. Holdtime has been introduced to tackle this issue in the "preemption disabled scenario".
Configuration via CLI:
(controller) (config) #vrrp <id>
(controller) (config-vrrp)#holdtime
Description:
The VRRP virtual router does not begin listening to advertisements until the holdtime expires. If your deployment includes a VRRP master with preemption disabled and an uplink switch is running RSTP, a higher value will prevent the VRRP master from regaining the master state after it reboots.
Range: 30 - 120 seconds
Default: 45 seconds

Hey Jim,
Thanks for the follow-up. Here are some more details:
OS - 10.8.2
FCP X - 10.0.7
I can't update either of these because of my Avid installation.
Something else I didn't mention – this happens in a 4K project. Notice how a default Zoom title looks:
Lines 1 and 2 are almost stacked on top of each other.
Here's my title style:
Here's what the title looks after I apply the title style, modify Line 1, and remove the contents of Line 2:
And here's how it looks in the exported master file MOV:
Notice how it's pushed down?
Then I decided to make a 720p project. No more title problems.
So if you have some 4K footage, Jim, give it a go. Or if there's another 4K-er out there, try this and let me know.
Thanks!

Why does Siri keeps talking with every action I take on the iphone?

Why does Siri keeps talking with every action I take on the iphone?

Settings > General > Accessibility > Speak Selection > switch off here

Why does my iPod Touch have a white screen and how do I get rid of it?

Why does my iPod Touch have a white screen and how do I get rid of it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Why does itunes get locked with last update after clicking on search button ?

Why does itunes get locked with last update after clicking on search button ?

Why does itunes get locked with last update after clicking on search button ?

Why does a yield sign with an ! sign come up on some photos

why does a yield sign with an ! sign in the middle come up on some photos

That means iPhoto has broken the file path/link to the original image file. Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
iPhoto 8 (09) and earlier- run the options indicated
iPhoto 9 (11) and later- run Option #4 to rebuild the database
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
File ➙ Rebuild Library (iPhoto 8 or earlier)
or
Library ➙ Rebuild Library (iPhoto 9 or later)
menu option to rebuild the library.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Why does my Mac boot with a Grey screen and a globe?

Why does my Mac boot with a Grey screen and a globe?

Usually means you don't have a bootable system installed so the OS is looking for a bootable system on the network.
Does the computer eventually start up shortly after the globe appears? If so then open Startup Disk preferences, select your boot volume and click on the Restart button. If this is not the case then you need to reinstall Snow Leopard.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Gallery Images: How to make clear PNG's open in full screen with a white background?

Hi,
So in the Life on Earth textbook, there is an image of an ant that has no background, so when you pick it up, you can see the text below without the standard "white box" around it.
I've scorwed the internet looking for answers but couldn't find any.
Please see the photos snapped from my phone of this:
Unfortunately... When I try to achive this, my images open on a black background.
I can achive the pick up.
Would really appreicate the help. Thanks...
Grant

Well, if I put a white background in my image, it opens in full screen with a white background. But has a white square when I pick it up:
This is with a 2028 x 1496 image same as above, just no background - came out of Illustrator - and this has the effect I want, as the first post but still opens to full screen with a black background.
Thanks for the help... Hope to get this one figured out!

My iphone 4 is stuck on the hello screen...with a white background after i tried to update it. How do i correct this? I have already gone to itunes and backed it up. But after i back it up it always return to the hello screen in different languages ?

My iphone 4 is stuck in the setup phase with a white background. It tells me hello in several diffrent languages and tells me to slide to set up. I have already backed it up on itunes several times but it always returns to the hello screen with the white back ground. Can anyone please help me with this? All of this happened after i updated it for the 1st time. Help pLease?
Edward

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Image with transparent background shows up with a white background in ID

Amateur needs help.
I have a copy of a logo with a transparent background. I made the (white) background transparent in PS by creating a layer from background and then selecting the white color in the background and deleting it. This has always worked in the past. But when I place this image into ID, it shows up with a white background. I have tried saving as a PSD, TIF, JPG, etc. I cannot get it to work.
I normally research these things until I find an answer, but I am on a tight deadline. Thanks!

I totally forgot to put that in my post. Yes, I am putting logos with transparent backgrounds in front of colored rectangles. That's how I noticed that this one logo is showing up with a white background. The weird thing is that the other two logos are fine. I did find a different version of this logo and this one works fine. The one that works fine is a JPG and the one that shows up with a white background is a JPG.

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want

That may not be what you want, but Jpeg images are flattened, without transparency. Every pixel has a color value, with the default background usually being white. If you want to crate an image that leaves the erased area transparent, you will need to use an image format such as .gif or .pnc.

I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the i

I have been trying to watch tutorials on how layering works. All I want to do is this: I have one image of a radio with a white background. I need to have just the radio extracted, then on a new layer (white one/blank/plain) I need to copy and paste the image of the radio two times. How can I DO THIS!?!?!?! Thanks!

In Editor, go to the expert tab.
Open picture B, the one you wish to select the radio from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and the radio B on a separate layer.

Why does my illustration arrive with a white background?

Similar Messages

Maybe you are looking for